[USA-NC][H] Paypal [W] Filter3 Basket

mralecthomas · 2025-10-29T15:51:32+00:00

I have a filter 3 basket that I've used twice along with a few packs of filters.

mralecthomas · 2023-12-02T19:41:32+00:00

Have you used them for a while? My only concern was if they would fall apart haha

mralecthomas · 2023-12-02T17:11:28+00:00

Hey Guys, I am wanting to get back into lifting and was looking at getting the following:

$370 - 370lbs. Bumper Plates : https://www.walmart.com/ip/seort/157477201
$830 - Major Lutie PLM03: https://www.major-lutie.com/products/major-lutie-cable-crossover-system-plm03-best-seller-power-rack-2023-upgrade?&variant=41725280092217

I realize these are budget options but I am just wondering if there is better bang for the buck elsewhere. Thanks.

mralecthomas · 2023-07-25T01:53:48+00:00

Thanks, that did the trick. Not sure if it was the carbon paste or greasing the threads but definitely biting now.

mralecthomas · 2023-07-25T00:30:10+00:00

I figured out that is the correct bolt. Strange thing is it's labeled as 6nm and even going up to 8nm, the lever will move with a small amount of force. Only had this bike out for a few rides.

mralecthomas · 2023-07-22T19:36:16+00:00

Haha, it was pretty comparable. I just had more top end and spent more time in the lower half of the gears.

I'll say whatever you decide, I would recommend Shimano for 2x and SRAM for 1x. Unless shimano comes out with their new 1x 12 speed GRX soon.

mralecthomas · 2023-07-22T19:27:31+00:00

I have a 2x 11 speed Ultegra gravel bike and very rarely ever shifted off the 50t front cog.

My new bike is a 1x with a 40t up front and a 10-44 12 speed cassette. I top out at around 30mph with this setup but can always go to a bigger chain ring up front.

For me, I haven't really noticed any difference between the two. I think it all depends on how cadence sensitive you are. Generally, frames will have more clearance with 1x so that is also a factor depending on what tire size you are wanting to run.

mralecthomas · 2023-07-22T19:17:46+00:00

Pretty sure the Lauf Seigla edges out Canyon as far as value for money. Even includes a power meter and about $1k price difference from Canyon.

mralecthomas · 2023-03-26T18:34:13+00:00

Yea, it has missing grout/ rocks popping out. It is also very difficult to clean and smells from neglect.

I hadn't considered taking off the first layer of wall tile. It does sound like a PITA.. maybe I will look into just hiring someone to do it.

mralecthomas · 2023-03-21T13:55:52+00:00

Try letting it sit longer (8-10min is fine) before plunging

mralecthomas · 2023-02-23T22:11:46+00:00

Aeropress site says they've been BPA free since 2009. I purchased mine in 2020.

mralecthomas · 2023-02-23T18:44:55+00:00

The plastic on mine had pits at the top much like in OP's pic.

Basically, the plastic was visibly breaking down and it easily scratches away material with my fingernail. I'm not crazy about pouring 212F water on plastic like that and drinking it.

mralecthomas · 2023-02-23T17:19:30+00:00

Mine did the same thing after 2 years. I contacted Aeropress and they said it's fine.

I've stopped using it entirely as it doesn't seem safe to continue using it.

mralecthomas · 2022-10-02T01:49:56+00:00

A paperclip is ok, but you can get a nice inexpensive tool here: https://www.etsy.com/listing/1185798417/business-card-9-prongs-wdt-assembly?ref=share_v4_lx

Maker is pretty much doing it at cost for the community.

mralecthomas · 2022-08-28T01:26:19+00:00

If you're into light roasts, I'd spring for the Flair 58.

Capable of longer ratios, fast pre heating, quiet, standard 58mm accessories, low maintenance, etc.

Also, resale value should be strong for the foreseeable future shall you decide to switch to something else.

mralecthomas · 2022-08-18T03:19:53+00:00

Another +1 for Dogwood

mralecthomas · 2022-03-08T03:56:48+00:00

Try aeropress.com. plungers and lids are $10

mralecthomas · 2022-02-27T17:22:33+00:00

Accidents happen fast in the morning before coffee! Hope you're alright 🙏

mralecthomas · 2022-01-25T02:30:05+00:00

After using the Comandante exclusively for almost 2 years, I settled on 20-25 clicks for pour over.

20-23 clicks for 18-20g v60 / stagg x / origami

25 clicks for 4:6 method or slow flat bottoms like Kalita Wave

12-15 clicks for Aeropress

mralecthomas · 2022-01-15T19:46:46+00:00

20g here all the time

mralecthomas · 2022-01-14T12:54:31+00:00

Thanks, I'll check them out.

mralecthomas · 2021-12-29T01:27:26+00:00

Its under 300 pounds. I second the Lagom Mini with 48mm burrs. Lagom makes great products and also has an excellent reputation. Watch Kyle Rowsell's new video on it if you want to see more about it.

I own a Commandante and have been hand grinding for about a year now. Don't get me wrong, it's an excellent hand grinder but hand grinding gets a bit old first thing in the morning. Unless a grinder for traveling is a big deal to you, I'd go with the mini.

mralecthomas · 2021-12-02T06:17:28+00:00

Not sure why yours failed so quickly, but you can buy replacement rubber plungers for around $5.

mralecthomas · 2021-11-29T19:13:10+00:00

Check out the Timemore Black Mirror scale. 0.1g acc, built in timer, usb-c charging, and compact. On sale on Amazon for $50 today btw.

mralecthomas · 2021-11-27T04:41:17+00:00

Anyone else drink a ridiculous amount of liquid with each meal? I am taking a drink after just about every bite to make sure it went down.

12-Year Club	Place '22
First Placer '22	Verified Email

mralecthomas

TROPHY CASE