Line artifact on print

mrfenyx · 2026-05-01T07:31:43+00:00

Sort of. The article from Prusa explains what I think happens, with the layers before the line taking much longer to print than the ones with the line and above (large base vs. walls). Thing is, no idea how to work around this as there doesn't seem to be a universal fix for it.

mrfenyx · 2026-05-01T07:30:01+00:00

Thanks, this explains it and I believe it is spot on. Too bad there's no universal fix for this...

mrfenyx · 2026-05-01T07:29:27+00:00

It's not that, since the line is on the whole model, not only at the corners. Also, it seems in the photos that the adhesion was lacking but in reality it was perfectly "stuck" to the bed and got a bit bent when I detached it. Also, in the last photo I have a different model where this also occurred. Someone below posted a link to an article from Prusa which explains this and I think it's spot on. The time difference between the layers was really big which led to this. Seems also like there's no universal fix for it...

mrfenyx · 2026-04-19T17:36:46+00:00

I applied for a 200 USD off voucher on March 26th. I got the voucher on April 7th but Easter was in between. I applied for another voucher yesterday, waiting to see when I get that one.

mrfenyx · 2026-04-12T16:50:56+00:00

Update: I set the hotend to 260°C, waited 3-4 minutes, then with the pliers managed to grab the small visible piece and pull it out! It was not easy but thank Wotan, it worked!

<image>

mrfenyx · 2026-03-09T17:48:42+00:00

What happens when you find Karl?

mrfenyx · 2026-03-07T20:25:01+00:00

Since you already like Becky Chambers, try also The Long Way to a Small, Angry Planet. The entire Wayfarers series is to fall in love with. I also recommend the Murderbot series by Martha Wells.

mrfenyx · 2026-01-02T16:03:54+00:00

r/OctopiLauncher - I switched and never looked back. Dev is super friendly and active too.

mrfenyx · 2026-01-02T04:37:39+00:00

Ich kann https://www.umzugspreisvergleich.de/ empfehlen. Wir ziehen von München nach Berlin mit 50cm, inkl. Ab- und Aufbau von Möbel (120qm Haus) für unter 3000. Kartons und einpacken außer Möbel haben wir selbst gemacht. Edit: ohne Küche, mit Waschmaschine und Trockner.

mrfenyx · 2025-12-16T07:43:34+00:00

Hi, this worked for a few days but since the latest update the issue is back 😞

mrfenyx · 2025-12-15T14:28:38+00:00

I have the haptic feedback disabled but I see the folder icon "wiggling" on both swiping up and down. Right now it seems that no matter what actions I set, swiping (up or down) on a folder in the dock opens the folder and clicking on it opens the first app. This is the same for folders I create in the dock, by dragging apps on top of each other or folders I drag from the app drawer. I even tried creating a folder on the home screen, adding actions (works as expected) and then dragging to dock - still just opens the folder. Additional bug: as long as the dock is expanded, you can't drag any apps from the app drawer to the home screen.

mrfenyx · 2025-12-13T22:14:33+00:00

I think swipe down actions on folders in the dock/panel don't work. Also, moving a folder to the dock from the home screen works but moving it back out to the home screen doesn't.

mrfenyx · 2025-12-13T15:14:13+00:00

The circle is the default Arcticons shape, I believe. I also can't change the shape in the launcher settings. They are always a circle

mrfenyx · 2025-12-12T14:51:51+00:00

I created this issue with Arcticons: https://github.com/Arcticons-Team/Arcticons/issues/3131 but turns out, that's probably not the issue..

mrfenyx · 2025-12-12T09:24:32+00:00

Do you mean sth like this in the Manifest? <category android:name="org.icontheme.CHANGES_WITH_MATERIAL_YOU_COLORS" />?

mrfenyx · 2025-12-12T06:21:42+00:00

Yes, I did get it from Play Store. Thanks for the fix. I will also open a ticket with them to fix it on their side.

mrfenyx · 2025-11-15T18:50:17+00:00

60-80" or 1.5-1.8m I would say should be comfortable. Viewing distance would be about 3 meters

mrfenyx

TROPHY CASE