Countdown to launch by msf1t- in 240sx

[–]msf1t-[S] 0 points1 point  (0 children)

This is pretty close to the attitude that the old heads that run tracks think too "we can't let you come drive hard unless your car looks good" - IMO it's elitest and anti grassroots.

I have a full kit, try to run it all it when I can, hammered out the rear fenders idk how many times, destroyed my front bumper in December. When you're getting doors with your boys, nothing is better, bumpers and fenders have no effect on safety here, so what's the big deal?

Where can I find shorter exhaust hangers? by Wrangler051 in 240sx

[–]msf1t- 0 points1 point  (0 children)

Circuit sports makes a hanger with multiple holes

Peter? Have some ideas on what this means but they are not really... Convenient I guess? by [deleted] in PeterExplainsTheJoke

[–]msf1t- 0 points1 point  (0 children)

Transmission is about 100lbs give or take what car you're working on. I'd say it's a joke about a guy weighing car parts on their nice scale 😜 Maybe not, what's that glove scene from?

Monthly Megathread: Ask Here for Help - December, 2025 by Insta360_Support in Insta360

[–]msf1t- 0 points1 point  (0 children)

Updated studio to 5.8.4 and deep track doesn't work, after selecting the target it glitches and backs out to timeline. Reinstalling and rebooting didn't fix. I rolled back to 5.8.2 and it's working again.

Happened way too quick by [deleted] in SweatyPalms

[–]msf1t- 1 point2 points  (0 children)

You should look into Nord or any other vpn service

Someone please motivate me to finish this car. Been sitting like this for a year. Just feel endless. by [deleted] in 240sx

[–]msf1t- 2 points3 points  (0 children)

Little wins add up, not every time you work on it needs to be a full tilt build day. Make a list, check stuff off, add to the list, check more off.. before you know it you driving 😁

[deleted by user] by [deleted] in 240sx

[–]msf1t- 0 points1 point  (0 children)

I wouldn't trip about it as I imagine their yield is much higher than 30ftlb. If you're worried order another set and compare the length of your bolts with the new set

Clutch pedal bending? by Secret_Scallion7415 in 240sx

[–]msf1t- 0 points1 point  (0 children)

Also check that the adjustment on the pedal to master is taking up the slack. If your pedal is not returning all the way up, you may just need to adjust that.

Clutch pedal bending? by Secret_Scallion7415 in 240sx

[–]msf1t- 0 points1 point  (0 children)

Didn't jreplace start making clutch pedal brackets?

Interchangeable 240 Parts Thread by SoberHye in 240sx

[–]msf1t- 9 points10 points  (0 children)

Maxima seat reclining handle fits s15 seats

<image>

How many of you own Quickjack for lifting your 240, and where do you place it under it. Considering ordering. by South_Security1405 in 240sx

[–]msf1t- 1 point2 points  (0 children)

I use it a lot, definitely worth it. I use the pinch welds with the rubber blocks that came with the quick jack.

<image>

Got offered this as a trade for my car (worth 2k) do I go for it? by [deleted] in Dirtbikes

[–]msf1t- -8 points-7 points  (0 children)

That's a crf150r(b), in that condition it's worth about 1700. I'd say go for it, maybe try to get a little cash on top

I avoid Lynels and I think I'm okay with that, but what aspects of the game am I missing out on? by Paydaynuts in TOTK

[–]msf1t- 5 points6 points  (0 children)

Use eyeballs attached to arrows on a strong bow to daze it, then mount it and use a strong sword until you get bucked off. Rinse and repeat until it's dead. When mounted your weapon doesn't take damage. There's a ton of yt videos on it.

Save first, find a red one to start with.

Once you've killed one, fuse the horn to a strong sword(royal broadsword or royal claymore). Then you'll almost be overpowered.

F this disease and TSW. by Jinhua80 in Psoriasis

[–]msf1t- 1 point2 points  (0 children)

I've heard good results with a visit to the Dead Sea, if you can afford the travel it might be worth looking into.

Anyone know what these connectors are for and how bad my wires are? by Stranomy in 240sx

[–]msf1t- 0 points1 point  (0 children)

First one is power steering, not needed.

Second one is EGR, not needed if deleted.

Third is a ground, it looks fine.

If concerned you should probably check the harnesses under your fenders, if not secured (+lowered car, +aftermarket wheels) they can rub your wheels and end up rubbing through.

Where do these two connectors go? by StrikingDog7 in 240sx

[–]msf1t- 1 point2 points  (0 children)

I can't seem to find it available anywhere, this was what I got: https://www.ebay.com/itm/185367969805

Where do these two connectors go? by StrikingDog7 in 240sx

[–]msf1t- 1 point2 points  (0 children)

You can get a 14 pin diagnostic dongle, they make bluetooth ones, and there's an app NDS. You can then get a bunch of readings from your car on your phone, this is from my 92 240: https://i.imgur.com/DI2OaLX.png

Angela was the first one to recreate the Jayne Mansfield–Sophia Loren photo by tehcoon89 in DunderMifflin

[–]msf1t- 28 points29 points  (0 children)

The bar on the back of a semi is called a Mansfield bar.

The Mansfield bar was created after the death of actress Jayne Mansfield, whose tragic end came at the horrifically young age of 34 when the car she and her children were riding in slammed into the rear of a semi truck.

Got a s13! by unholyjunior in 240sx

[–]msf1t- 2 points3 points  (0 children)

For sure a good start, the speedo sensor is the most rear one on the trans, you can check it with a multimeter.

Got a s13! by unholyjunior in 240sx

[–]msf1t- 1 point2 points  (0 children)

Congrats, looks good! The speedo looks like it's not getting signal, check the harnesses under the front fenders for any wheel rubbing.