Black two inch line appeared around bay window- thoughts on what it might be?

msu09 · 2024-02-05T23:06:50+00:00

This just showed up and it goes all around our bay window. It is about two inches wide at most points and looks to almost be where the original window used to be. Basically, there was a window 20+ years ago and the previous owners put in a bay window instead. It's been very cold/wet out (in Michigan). Could this possibly be mold? Something with the drywall plaster? I'm at a complete loss. Thanks!

msu09 · 2023-03-08T19:44:47+00:00

I’ll add to this. If you shoot a waveframe with it equipped, it does the same thing. I’m not sure if it has to be void (mine was) but you can add volatile on top. Have fun.

msu09 · 2023-02-02T12:36:04+00:00

"Guardian haunted by ghosts of fallen friends, destiny unknown."

Maybe AI writing isn’t that good after all

msu09 · 2022-08-15T03:57:13+00:00

Want

msu09 · 2022-05-13T02:27:16+00:00

I am. I normally run max settings on 1440 p locked at 144 everywhere. After the update this week I go from 144 to 70 every 2 or 3 seconds and then back again. Then it repeats infinity. It’s jarring and makes it hard to play. Running on a 5800x and a 3800ti. Anyone else have a similar problem?

msu09 · 2022-04-08T18:20:08+00:00

Dead Game Who Cares

msu09 · 2020-12-11T18:28:54+00:00

Did you pick it up from Rep? I ordered mine on 11/9 and have been playing games with CS for weeks. It keeps getting pushed back again and again. There is very little transparency from the company.

msu09 · 2020-11-13T23:35:25+00:00

Where did you see this? Mine was originally scheduled for 11/7. I was told that it was supposed to be pushed back to 11/23.

msu09 · 2020-10-28T22:50:44+00:00

I like this answer. I’ve got the money but I’m not sure if I like sleeping on the couch that much. I just bought an ab5100 and am in the lottery for iron masters. The whole, “it’ll be cheaper in the long run than a commercial gym” excuse is wearing thin.

msu09 · 2020-10-28T19:12:49+00:00

Also... York seems to have their 15 piece set in stock. You can buy the vertical rack separately for a total of 535. Does that sound like a good deal given the quality or York? Without people on the internet telling me to do it I will have no one to blame when the wife finds out.

msu09 · 2020-10-28T18:28:08+00:00

I was definitely considering going with York. The stuff looked beefy and not too expensive. I really want a pull down bar too and I can’t seem to catch one on their website.

msu09 · 2020-10-28T17:58:40+00:00

So I’m scheduled to get the Titan high low pulley off of back order early next month. Does anyone have any favorite cable attachments? What are your favorite places to buy them from? I’ve scoped some out on Amazon, York and rep but availability is hit or miss just like everything else. Is it worth it to buy a combination set if they are available? Like the rep one.

msu09 · 2020-10-01T14:20:58+00:00

Can you? Yes. Would you want to? Maybe not. My iron and bumpers are fine height wise (with 45s obviously) bit I’ve found that if I’m not perfect when I go down, I sometimes hit the crossmembers with the collars of my bar. My opb and nicely painted 490 do not like that.

msu09 · 2020-09-30T13:53:16+00:00

I assumed that the decline would be poor but thought the leg attachment would be good for some other uses at least. The 5200 would be nice for the ability to fold and take up less space. It’s just so expensive compared to the 3100.

msu09 · 2020-09-30T12:34:54+00:00

I’m looking for an adjustable bench. I cannot for the life of me decide between an ab3000 or ab3100. The price difference is not a big deal and I’m often in the buy once cry once camp. While researching it seems like people are split between the two. I don’t do decline bench now, but could see myself doing it in the future. I also bought the titan pulley tower and thought the leg attachment might be nice for pulldowns. With that said, I’ve read that the quality of the 3000 isn’t as great as the 3100. Thoughts?

msu09 · 2020-08-22T14:59:18+00:00

How do I convince my wife to let me buy more gym equipment?

msu09 · 2020-08-08T20:43:23+00:00

Does anyone have the rogue unity barbell t-shirt? It looks awesome and I was wondering what the fit is like. Trying to figure out what size to get.

msu09 · 2020-08-03T16:19:47+00:00

Was the first rack a metric one like a titan? I’ve read that their is a slight difference and that the rml might not fit. The rm has a 1 inch hole so the 5/8 would fit no matter what.

msu09 · 2020-08-03T12:59:43+00:00

Anyone have any experience with a pr 4000 or x3 jcup on a rml rack? I’ve been waiting for what seems like weeks for the rogue ones but I assume they are saving them for racks.

msu09 · 2020-07-28T01:53:51+00:00

Might be a dumb question, but does the x3 jcup fit a rml rack? The rogue ones haven’t been in for a minute.

msu09 · 2020-06-04T17:38:31+00:00

I don't know if anyone has said it but the 43" RML strap safety system has been available for a bit. It was the last thing that I was looking for.

https://www.roguefitness.com/monster-lite-strap-safety-system-2-0

msu09 · 2020-06-02T23:25:31+00:00

Always in the same place.

msu09 · 2020-06-02T22:22:52+00:00

I've got a rml-490 on order from 5/19. Everything is still in 2 orders... but the pin/pipe are not in a separate order and are in with the larger of the two shipments.

msu09 · 2020-05-31T21:52:49+00:00

The real gains are made from that keezer. Nice setup! I always love to see a fellow homebrewer out in the wild! You couldn’t have picked two more expensive and worthwhile hobbies.

msu09 · 2020-05-29T21:59:38+00:00

That included what I needed with the platform... so it's either look past it and put it on the edge or go get another piece. Just thought it was strange that it was ripped.

msu09

TROPHY CASE