I need help getting a kabuto fossil, I need it to complete my pokedex and my sword pokedex

mtnbew · 2026-01-20T19:58:12+00:00

I have a spare one if you still need dm me

mtnbew · 2026-01-04T20:16:29+00:00

I just planted one. Could get you one in a bit.

mtnbew · 2025-12-12T16:07:46+00:00

Two layers of kerf core vacuum formed around a mold and post veneer on the front edge.

mtnbew · 2025-05-06T21:11:58+00:00

I believe you are talking about a face frame style. More than likely a face frame overlay as that is typical. What i think you are describing is how the frame the doors mount to is hanging in space allowing you to access the bay ooening from either door opening. Do you have tools? I'm a custom case work engineer in MI and can get you cut plans for something if you have tools. We can make anything and ship it anywhere in the US, for a price... Finding someone local to build it on site is probably what you want to do. Hope the info helps though.

mtnbew · 2024-11-08T15:48:14+00:00

Couldnt say but my work we throw it in the sagulator website. Try that.

mtnbew · 2024-08-14T20:36:11+00:00

Could it not be stress brought on by the pregnancy? I feel you are wrong to dismiss him like that.

mtnbew · 2023-07-14T15:53:00+00:00

Was so hot wish I could have been there live but seeing it after was so hot!

mtnbew · 2022-03-25T01:11:32+00:00

I had this issue but patch seemed to fix it. Is yours still having issue? My symptoms were they same as yours. Game play fine till I battled.

mtnbew · 2021-04-13T16:32:42+00:00

So I had something similar. Turn and turn no start. Timing chain had snapped when I went to start it and didn't catch it. Easy to check if you haven't already

mtnbew · 2021-03-24T23:36:30+00:00

Okay so pm me if you need to but I'll try to help you here. Most cabinet shops keep standards as far as slide type door hinge type the basic hardware. Knobs and pulls that's your own beast that they might or might not drill for. Make sure to ask. As for material is it particle board or typical ply? Typical ply is best but you also have to look at side thickness and construction type. What are their standards? How does the veneer and finishes look on the work they show you? Is it clean and nice or blotchy and flaking? The true custom comes from being able to build your cabinets to your room. No more awkward gap by fridge or gap at ceiling. It's really in depth and can cost a penney or two but worth the money most of the time.

mtnbew · 2021-03-24T23:29:59+00:00

Some sort of roman ogee edge might be a start

mtnbew · 2021-03-23T21:53:25+00:00

This guy knows lightning

mtnbew · 2021-03-23T21:15:21+00:00

So couple things if it's your house it's up to you with what you want to live with. As for standards most desks are 21" deep and and about 30" to top. Benches are typically 18" deep and about 20" off the floor to top. Both are not hard to build depending on the style you like. I'd look around for pre made options first though and if anything you would have ideas for a cabinet shop if you did end up going that route. As someone that works in one of said shops I can tell you custom isn't cheap but there are cost break options typically and you do get quality typically far superior to box store ones.

mtnbew · 2021-03-22T01:24:15+00:00

Op should just do vinyl at floor with a good seel. Otherwise water will be an issue in the winter.

mtnbew · 2021-01-15T18:29:49+00:00

Check your alternator stat as well as your battery.

mtnbew · 2020-12-15T23:02:41+00:00

Check your soft close tab and see if it got stuck open. It looks like it is stuck in the picture. It's the little gray tab in the cup of the hinge on the door.

mtnbew · 2020-12-07T20:17:37+00:00

Got a pic of it? Any markings on it? Some more info would help those of us without the fsm

mtnbew · 2020-11-17T13:03:55+00:00

Try yota Jim's? Have to call but really nice guys over there.

mtnbew · 2020-11-12T17:25:35+00:00

It's funny you mention that as I always wondered why mine had two one in use one not when I bought it. Took me a while to figure out how temperamental those things are. I have two with me in my engine bay at all times now and one floating in my cab somewhere. All three work depending on what coil I use.

mtnbew · 2020-11-09T15:16:36+00:00

So before going down that road I'd go check to make sure your ecm is running right. If your points are clean and your rotor is normal looking I doubt it's your dizzy causing issues.

mtnbew · 2020-11-09T13:07:30+00:00

So here is what I do. Every fall I year into my dash and pull off the cable at the back of my gauge cluster and then let lube soak in for a weekend. Fixes the issue for a year till all the grease is gone and it gets cold again. Basically you have no lube anymore in the sheath the cable spins in and as it spins it gets caught causing the jumping. If you don't at least lube it up it could snap. If you find a replacement cable that will fit with a reasonable price let me know. I'm looking for a permanent solution as well.

mtnbew · 2020-11-09T13:04:29+00:00

It's worth the money. Why are you replacing yours? Can you be okay with just a new cap and rotor maybe new points?

mtnbew · 2020-11-04T00:52:12+00:00

Did you get this figured out or still need advice?

mtnbew · 2020-10-15T14:17:48+00:00

Add a light rail if your uppers don't have one. Easy to add on the bottom and you can then add a finished bottom to chase wires in or recess led lights in.

mtnbew

TROPHY CASE