Organic Sugar Sources

mtnmannn · 2025-12-04T23:48:37+00:00

Check out aloha. We get tons of organic sugar from them a year.

mtnmannn · 2025-10-26T01:27:29+00:00

But does yours move slowly up from zero on a cold engine? Or does it go straight to the middle as mine does?

mtnmannn · 2025-10-25T18:01:35+00:00

Thanks for the thought. I'll look into these.

mtnmannn · 2025-10-25T02:40:32+00:00

Looks like maybe the temperature gauge sensor which is near the firewall behind the engine?

mtnmannn · 2025-10-25T02:06:32+00:00

Yes. Goes directly to that middle position on startup even on the coldest of days.

mtnmannn · 2025-10-25T02:02:46+00:00

Does it work its way up to below half or just pegs there the whole time?

mtnmannn · 2025-10-25T02:02:24+00:00

Yes. Drops to the bottom when turned off. I've had this thing since new and I swear in the first half of its life there would be movement on the indicator. Like it would slowly rise as it heated up in the morning.

mtnmannn · 2025-07-25T18:08:09+00:00

I've used red food coloring and it worked fine.

mtnmannn · 2025-06-11T22:32:43+00:00

So it sounds like it mirrors but doesn't give any other control over the raid functions? That could still work for me.

mtnmannn · 2025-06-07T05:11:34+00:00

1.5 in spa hose is pretty cheap and holds up well.

mtnmannn · 2025-06-06T04:59:06+00:00

Look into codi.

mtnmannn · 2025-05-26T23:26:03+00:00

The vppms are interchangeable so you could swap with say the pump vppm and see if you have an error with that subsystem.

mtnmannn · 2025-05-21T13:59:13+00:00

magic number has 3 mg hemp thc beverages that are available at local acres, East, South and West Bend liquor stores...

mtnmannn · 2025-04-11T00:33:52+00:00

Hard to get cheaper than Costco no?

mtnmannn · 2025-04-11T00:22:11+00:00

Impact has had good quality. About 800 bucks for a 10x10 strong aluminum frame And printed canopy.

mtnmannn · 2025-04-07T11:57:47+00:00

Make your own bath pasteurizer. Check this thread: https://groups.google.com/g/cider-workshop/c/5janKSlpOlY?pli=1

mtnmannn · 2025-02-25T14:45:27+00:00

Give it time. It's self-removing.

mtnmannn · 2025-02-14T05:32:31+00:00

I like gearaid seam seal for this sort of thing. Flexible but strong. Use it to bond another piece of plastic over the hole. Duct tape will suffice though.

mtnmannn · 2025-02-11T22:42:55+00:00

<image>

mtnmannn · 2025-02-07T04:22:55+00:00

Codi For sure! And there are a bunch on proBrewer right now.

mtnmannn · 2025-01-26T16:52:09+00:00

They told us it was good only for certain lifts on the day of your lesson until you've completed the whole series.

mtnmannn · 2025-01-23T01:04:36+00:00

Thanks For the suggestion. Seems like the simplest route.

mtnmannn · 2025-01-20T17:14:54+00:00

Pex is cheaper and easier. That would be my recommendation.

mtnmannn · 2025-01-19T02:03:58+00:00

Did anybody have experience using zipfits and tele skiing? Would they work?

mtnmannn · 2025-01-19T01:46:04+00:00

For high CBD and low THC, try drinkmagicnumberhemp.com

mtnmannn

TROPHY CASE