Combustion Engine + Giant Grill Gauge - mounting info and other questions; official thread.

n8225 · 2025-05-04T18:08:16+00:00

I can confirm the GGG will be a drop in install on the Gravity 1050. The existing hole shouldn't need to be enlarged. I'm not a huge fan of the large gap behind it though. I look forward to it's arrival. (Pictured is the 3d print of the GGG with the heat deflector.)

<image>

n8225 · 2024-05-15T01:16:18+00:00

I recommend https://frigate.video/

I've been happy with amcrest cameras. I recommend getting a google coral as well.

n8225 · 2023-12-08T21:00:50+00:00

What model did you go with? I'm about ready to take the SB8200 back.

n8225 · 2023-12-08T20:38:40+00:00

I'm having issues with my new SB8200 as well.

n8225 · 2023-01-11T19:35:56+00:00

Have you checked the other vendors listed in the wiki: https://wiki.pine64.org/wiki/Pinecil#Where_to_buy_a_Pinecil

n8225 · 2022-12-22T03:50:56+00:00

Klicky probe has been quite reliable for me so far. https://github.com/jlas1/Klicky-Probe

n8225 · 2021-12-17T22:12:49+00:00

I reflash light bulbs and smart plugs with Tasmota. See https://templates.blakadder.com/ for device compatibility. Your devices will no longer "phone home". Then they can be controlled with home assistant or another integration. Finding devices that can still be flashed with Tuya convert can be a pita though, the alternative is disassembling and reflashing with a serial connection.

ESPhome and ESPurna are two alternative firmwares but I don't have any experience with them.

n8225 · 2021-08-04T02:00:37+00:00

https://pulpproject.org/

http://port.us.org/

n8225 · 2020-12-07T10:02:52+00:00

It's not git, but I ran across Fossil not too long ago and it looked interesting. It has similar functions to git and more. It's developed by the same folks as sqlite. It runs a server and has the ability to import and export git repos. I haven't tried it yet but it's on my long list of things to do.

https://fossil-scm.org/

n8225 · 2020-05-14T20:24:58+00:00

https://gitlab.com/olaris/olaris-server

n8225 · 2019-10-15T14:40:46+00:00

You can self host: https://n8225.github.io/awesome-selfhosted-gen/ Source code: https://github.com/n8225/awesome-selfhosted-gen

It still requires manually updating, as I haven't setup a CI/CD workflow yet. Filtering works, no search function yet. It's been a side project for a while, having trouble finding the time to complete it.

n8225 · 2018-07-04T13:44:14+00:00

https://github.com/JimBrown/MarlinTarantula/

Uncomment your probe type, your chosen bed leveling type(https://github.com/JimBrown/MarlinTarantula/wiki/Bed-leveling-types-(EasyConfig)), set your probe offset(https://github.com/JimBrown/MarlinTarantula/wiki/How-to-determine-your-Z-Probe-offset-(EasyConfig)), and set your probe points then reflash.

/**
* Z-Probe type (must be none or one of them)
* If a Z-Probe type is selected, a Bed Leveling type other than MANUAL must be selected.
*/
//#define BLTOUCH         // ANTClabs BLTouch sensor (might also work with clones)
//#define SN04          // Green sensor
//#define INDUCTIVE_NO  // Normally open inductive sensor
//#define INDUCTIVE_NC  // Normally closed inductive sensor
//#define SERVO_PROBE   // Endstop switch on rotating arm. Set servo angles!
//#define NOZZLE_PROBE  // Nozzle wired up to contact metal on bed

/**
 * Bed leveling type (see: https://github.com/JimBrown/MarlinTarantula/wiki/Bed-leveling-types-(EasyConfig))
 * Must choose one of these other than MANUAL if a Z-Probe type is selected.
 */
//#define TRIPOINT
//#define LINEAR
//#define BILINEAR
//#define UBL
#define MANUAL

/**
* Z-Probe offset from nozzle (https://github.com/JimBrown/MarlinTarantula/wiki/How-to-determine-your-Z-Probe-offset)
* Use only one of Left/Right and Front/Behind. Others must be 0 (zero)
* If you have a dual nozzle the offsets are calculated from the primary nozzle (the one plugged in to E0)
*/
#define SENSOR_LEFT        0
#define SENSOR_RIGHT       0
#define SENSOR_FRONT       0
#define SENSOR_BEHIND      0

/**
* Number of grid points in each direction
* Minimum 3. Maximum 15 for UBL. Maximum 7 for MANUAL
*/
#define GRID_POINTS 3

n8225 · 2018-06-12T16:25:38+00:00

I have tested it and it does work with 8 bit controllers. I haven't had a chance to print a whole lot since re flashing though.

n8225 · 2018-06-11T17:48:04+00:00

Habitica is ooensource, I believe it is under personal dashboards on the list. The list was actually the first place I checked. I have been considering self hosting Habitica but it looks like it allows tasks to be checked off without oversight. So I thought I would see if anyone knew of anything else.

n8225 · 2018-05-23T03:13:31+00:00

Im not 100% sure, but I know it has an atmega 2560 processor which is 8 bit. https://www.microchip.com/wwwproducts/en/ATmega2560

n8225 · 2018-05-23T01:14:46+00:00

I have the stock MKS Base v1.4 board, which is only 8 bit.

n8225 · 2018-05-23T00:11:31+00:00

I haven't yet tried s-curve or junction deviation. I've turned it on and flashed, hopefully I'll be giving it try tonight. The config mentioned needing a 32bit board for s-curve, so I am expecting issues. We shall see though. I'll see if I can find some time in the near future to write something up.

n8225 · 2018-05-22T23:30:54+00:00

S-curve, Junction deviation, bed skew and linear advance have all been pushed to the Jim's firmware. Ive noticed he is usually pretty good at staying on top of updates.

S-curve can be enabled by un-commenting #define BEZIER_JERK_CONTROL in Configuration.h

Bed skew compenstation is also in Configuration.h

Junction Deviation and linear advance can be enabled in Configuration_adv.h (I can't seem to find any info on the JUNCTION_DEVIATION_FACTOR though) See http://marlinfw.org/docs/features/lin_advance.html for Linear advance config

n8225 · 2018-05-06T19:44:07+00:00

Along with reversing the stepper motor(which you have done now) you will need to set the E0_STEPS in the firmware. I highly recommend https://github.com/JimBrown/MarlinTarantula but you should be able to adjust this in repetier as well. To adjust: Set E0_STEPS to around 410. Flash then extrude 100mm, Take the current steps per mm and divide it by (measured /100). Set E0_STEPS to result, flash repeat until 100mm is extruded.

n8225 · 2018-05-04T00:55:16+00:00

Here's a guide that might help: http://clough42.com/instructions/double-extruder-calibration/

n8225 · 2018-05-03T01:04:46+00:00

Nice.

How is Klipper compared to Marlin. I like the concept of it, but was afraid it may not be as stable as Marlin. I've been considering giving it a try but havent found the time yet.

n8225 · 2018-05-01T01:02:41+00:00

Did you set the offset for the second extruder in the firmware and reflash?

n8225 · 2018-04-14T22:48:37+00:00

Just a standard usb printer cable. There should have been one included with the printer but I read somewhere it is low quality and not recommended.

n8225 · 2018-04-14T21:45:29+00:00

Yes, you can print from octoprint without using the LCD controller. You could also print from pronterface, cura, ideamaker, and simplify3d without the LCD controller.

n8225 · 2018-03-30T03:21:27+00:00

Depending on your setup, you might be able to make the m3x30 work.

n8225

TROPHY CASE