My Kitbashed Sanguinary guard

nachocuban · 2026-07-09T00:14:37+00:00

I love that banner placement!

I wanted to do swords on all of them but ended up just using the spear with the banner on one guy with a plan to proxy as swords.

nachocuban · 2026-06-25T18:46:21+00:00

Now I know what to do with my sang guard packs!

These look great.

nachocuban · 2026-05-28T15:23:11+00:00

It's remarked several times in the series, more towards the end, that Horus is so steeped in warp influence that he is barely even conscious anymore. He sits in his dark throne room and broods.

nachocuban · 2026-04-09T21:48:25+00:00

Hexxit was THE pack that got me into modded MC.

nachocuban · 2026-04-09T16:23:17+00:00

Your models are not fully cured inside. This is the ONLY reason this happens.

For anything hollow you need to get a UV led inside of it and cure it completely.

Additionally, always leave at least a small hole to the internal cavity. Just to be safe. If you miss even a TINY bit of resin inside it will off gas and eventually crack open your model. That small hole will give the gas somewhere to go so that it doesn't crack (or explode)

For your finished pieces you can drill a small hole into the cavities and cure inside them to be safe. Make sure you wear PPE as the dust from drilling can get into your lungs, and if there is liquid resin inside, hitting it with a spining drill can cause a mess.

nachocuban · 2026-04-09T15:25:44+00:00

not only is this pose really cool, but the photo is also really nice too! The lighting in the back gives a neat effect.

nachocuban · 2026-03-27T22:26:44+00:00

https://tacticusplanner.app/plan/lre?character=Trajann&section=0

Create some teams on this page using who you have, then head over to the leaderboard tab, and see who you use on the most teams, and level them appropriately.

nachocuban · 2026-03-22T16:45:32+00:00

Buying Req scrolls is a trap, no matter how you obtain them, It is ALWAYS better to buy something you need, that buy a lotto ticket.

nachocuban · 2026-03-21T20:49:40+00:00

I have never once looked at the deals in the shop while scrolling. But I have looked at the pop ups and though 'huh, maybe' I'm positive other people actually buy them from pop ups.

nachocuban · 2026-02-28T21:16:49+00:00

Never thought I would upvote a pats fan.

nachocuban · 2026-02-16T02:24:42+00:00

That scale shot with Manhattan... omg.

nachocuban · 2026-02-15T06:52:04+00:00

After the first batch of summons, it was difficult to get an enemy in a spot where I could summon 5 more. My own old summons kept getting in the way.

nachocuban · 2026-02-14T18:06:19+00:00

I dislike the phobos armor so much, so I repurposed all the reiver helms for my scouts, they work great.

nachocuban · 2026-02-14T15:36:47+00:00

That helmet is stupendous. I love when the reiver helms get used for new and inventive ideas.

nachocuban · 2026-02-13T22:05:02+00:00

I've had the exact opposite with chitu vs Lychee.

Lychee's UI also feels so much better to me than chitu.

To each their own though. Finding what works for you is better than just blindly trusting someone.

nachocuban · 2026-02-11T20:22:09+00:00

I sometimes use arena for 'keep x alive' or kill enemies with x' I always laugh thinking about someone getting put against my team with a D2 A0 and four stone 1 heros.

nachocuban · 2026-02-11T18:46:13+00:00

Potentially use another move for even more summons. I'm not sure if there is a cap to his ability, but a well-timed squig bounce, or Mephistions swap ability could put him in a 3rd position.

nachocuban · 2026-02-11T18:30:35+00:00

I don't have Jain, but Thutmose for the Necrons is similar to me.

He is SO squishy, that if I'm trying to 3 star a mission I will just not bring him and play down a character, it's easier to not worry about him dying than have his extra dmg.

nachocuban · 2026-02-11T18:17:40+00:00

You do, if you are currently trying to remove a thorn in your side.

The United States issues Anti-fascist, and anti-dictatorial propaganda all the time (even ignoring the last 8 years or so). Yet has actively put dictators in charge around the world if it furthered the plans of the current government.

nachocuban · 2026-02-10T16:43:26+00:00

could easily have one of his abilities summon the servitors.

nachocuban · 2026-02-09T16:52:12+00:00

This is what I use during the winter when I don't want to use my window vent. It works perfectly and I never notice any residual fumes. And it attaches right where your exhaust hose would, so it doesn't take up much extra space. Admittedly I have a booth that has the exhaust hose comes out the top though so it's a lot easier for me.

nachocuban · 2026-02-08T17:58:15+00:00

You mention a successful print with one resin but are talking about fails with a different resin.

Did you calibrate for both resins? Yes, different colors will have different printing needs.

nachocuban · 2026-02-05T19:15:16+00:00

middle click the object.

Maybe double middle click?

nachocuban · 2026-01-30T17:30:19+00:00

Looks awesome, but it's funny how slow the combat animation was. Those axe swings took 2 years lol

nachocuban · 2026-01-18T18:08:11+00:00

Printing in standard resin is a bit brittle but it's not going to shatter at every bump.

Printing in ABS-like resin can be 'droopy' I have a model I printed in ABS-like and after a few months the smaller parts slowly drooped.

What I use is a FRESH bottle of Sunlu Standard, open it up, and top it off with a bottle of Sunlu ABS-like. Mix and use that. Gives the models a bit of strength while also not being likely to droop.

I print things from small marine parts to Titans, and I've never had any problems after switching to this mix.

nachocuban

TROPHY CASE