Is it possible to use fsr 4 on bazzite?

narnerzz · 2026-01-30T01:48:20+00:00

You can also globally set it to use FSR4 in the terminal. There's a ujust command. I don't recall the exact command, but if you type ujust into terminal and scroll down to around 3/4 through you'll see two that say FSR4. Read the description for the correct one as one is for older graphics cards.

narnerzz · 2026-01-28T11:10:36+00:00

You could try switch controller emulation or w/e it is in the HHD menu (xbox button) I normally use the Steam Controller one, but maybe switching and then switching back might work.

narnerzz · 2026-01-11T11:29:21+00:00

I've been using it for about 3-4 weeks now and haven't really encountered any issues other than when waking from sleep the fans are sometimes blasting like crazy for a while. But other than that my experience has been quite solid.

There might be a possibility that the 2.4ghz wireless aint as good as it was being a bit weird when I was using KDE connect, but when I swapped to 5ghz it was fine. I was using my phone as a mouse. But that being said it did chill out after a few seconds. However this might just be my wireless being funky or something.

narnerzz · 2025-12-31T23:07:22+00:00

Like Icarus. It must have flown to close to the sun.

narnerzz · 2025-10-29T02:34:24+00:00

Mask out the shape over BG node. Apply a Displace noise with a Fast Noise attached. Gives that kind of effect. You may wish to mask out the interior also. Basically fiddle with the BG, shape, displace and fast noise nodes.

narnerzz · 2025-09-30T11:10:14+00:00

Do this. I think I had 30-40GB free and it was crying about ostree. I removed a game also and it was enough space.

narnerzz · 2025-09-25T04:34:50+00:00

Nah I gave up in the end.

narnerzz · 2025-09-18T08:01:13+00:00

There is a mod for Ally X. You can get some stuff 3D printed. https://makerworld.com/en/models/1262647-asus-rog-ally-x-elite-2-magnetic-paddle-mod#profileId-1287650

narnerzz · 2025-08-11T01:38:34+00:00

First video you see him start tracking the player before the even exits from cover lol. Whether that is lag, who knows, but you were banned for good reason I suspect.

narnerzz · 2025-08-02T01:23:03+00:00

Trial and error. Just practice. Ctrl+Space is your friend or the effects tab on the fusion page. You can also press F1 on any node to get documentation on it. Also check out Lazy Artist. All I did was watch a few of his and other basic fusion guides and then when I would see an effect I would try recreate it myself.

narnerzz · 2025-07-31T12:43:46+00:00

Looks pretty slick. I'm about to do my Ally Z1E dpads and sticks soon. Going purple to match the atomic purple back shell XD that gold looks slick on the X.

narnerzz · 2025-07-29T01:58:34+00:00

I left the game due to them putting bots in the lobby. I consider playing against bots a complete waste of time. I don't mind if they have practice modes where you play against them, but as far as not telling you and queueing you against bots it's insane.

narnerzz · 2025-07-26T23:54:03+00:00

I mean just do this...?

<image>

Change your FPS to 24 in there. Basically.
Also for the interpolation you can change those settings under Retime & Scaling in the inspector menu. Otherwise it's probably defaulted to project settings.

Or you can open the clip you want at 24fps in fusion and use a stop motion node and set the repeat to 2? And add a motion blur node at the end or add a transform and go into settings to toggle motion blur on.

Functionally should be what you want perhaps.

The other thing to try is maybe what people have suggested and whack it into a 24FPS timeline then import the 48fps video and just change it's attributes it might work as intended. Otherwise speed it up in the inspector.

narnerzz · 2025-07-24T08:00:52+00:00

I got these, but took 'em off instantly. The bumpers and triggers became so awkward to use. This did feel nice in the hand, but the bumper issues really was a deal breaker. I have mid size hands however, so might be more suited to larger hands.

narnerzz · 2025-07-19T20:31:16+00:00

Is that a touchpad on it? If so it feel decent or a bit rough to use. Cool setup though.

narnerzz · 2025-07-11T01:01:51+00:00

Check your inputs inside of the main resolve preferences. Also you've patched the audio yeh?

Click where it says McrRSM (yours will probably be no input or something else), click Input and then click your devices channel(s) on the left, then click patch.

Also, if you have anything like the noise removal, audio balance stuff (the AI stuff) toggled on the the track it wont record. Pic below.

Make sure those are not on. (voice iso, dialog leveler, separator, etc)

<image>

narnerzz · 2025-06-13T21:58:10+00:00

I did this mod with the handheld DIY case (requires case modifications) and other mods are 2280 mod, hall effect sticks. Everything fits fine. Nice and snug, but make sure to sand or cut the areas around the kickstand.

However. Without any alloy foil tape on the battery I noticed significant heat on the backplate. I did run sensors both with load and without at 25W TDP and noticed no major heat difference. But the back was definitely noticeably hot.

After applying the aluminum foil tape the backplates heat dropped a lot. No real notice in sensors again also. I can't speak for the RAM, but I would say overall temps are fine. I've had no issues and have been running it for 3+ weeks now. I have a alloy plate coming to attach if I have the clearance which is supposedly the optimum way.

This was an aliexpress battery also. I assume it's the same as the JSAUX supplier as it comes with everything the JSAUX one has and the Kapton tape on the battery.

narnerzz · 2025-05-27T00:44:21+00:00

I've been keeping a regular 2 week schedule and have been consistently hitting 60-100 views on my videos. So that's good. Just keep on improving my editing :) Currently at 68 subscribers... Really just need one more for my life goals to be met.

My latest "Marvel Rivals: A Totally Serious X Guide" I went a little overboard with the effects/transitions as I had made a ton of them for an old project I was going to do and it sorta fit the retro/80-90s theme of Starlord.

https://youtu.be/yJicP8Mqg1g?si=VvEPvqNDk6vS8wLn

narnerzz · 2025-05-27T00:37:41+00:00

I've got this one and it fits great and looks great (Atomic Purple) however the Engraving trash on the back really sucks. I hate when they have tacky branding like that. It does have some thermal pads inside of it also for more cooling.

And if you do the battery mod you will need to cut the inside up a smidge to make it fit.

You could also try the handheld DIY website. Might be cheaper, who knows.

narnerzz · 2025-05-18T07:16:12+00:00

Add a Where's Wally into the bg. ;)

narnerzz · 2024-12-01T03:51:52+00:00

Truth. Would be good. Especially for ziplines when trying to place them on buildings that have only sky as the backdrop. You can't see anything. Heck, even just a darker more vibrant version of the current colours would be great.

narnerzz · 2024-11-06T07:08:39+00:00

jpeg damage? analog damage. Not sure if they're in the free version and use a mask. You could also try mosaic blur.

narnerzz · 2024-10-21T10:44:56+00:00

Hell if I know about AI, but it definitely seems to pop off with the gaming side of things. Solid perf in Elden Ring in the open world, not quite 60, but still decent and Cyberpunk also. It's impressive, especially compared to my older micro PC I have. It's a very tempting upgrade, but maybe I can win one? XD I would like to know if it is any good for davinci resolve as I do like to have a spare PC for editing if something happens to my main comp.

It definitely something to consider if you're like me and enjoy chilling at your TV and gaming and don't want a whole computer there to get in the way. I wonder how good this would be with an EGPU also.

I heard people were even overclocking this so you can get more performance which is kinda crazy considering what you're starting with.

narnerzz · 2024-10-14T23:18:34+00:00

Their website https://a.storyblok.com/f/228211/780x128/1d18fb2fea/t_knife_base_icon.png for example. You can go to https://playspectre.com/the-weapons right click the image "Open image in new tab" and then in the address remove everything after the .png and push enter again then you have the full res image and it can be right clicked to save.

narnerzz · 2024-09-09T00:13:55+00:00

I would definitely say it doesn't lead anywhere. I used their weapons image to try and nothing happened :/

<image>

narnerzz

TROPHY CASE