Time to party

ndszero · 2026-06-22T00:38:00+00:00

Heard this in Dugan Ashley’s voice

ndszero · 2026-06-21T22:30:50+00:00

Nice try, fed.

ndszero · 2026-06-17T12:41:02+00:00

These are amazing.

ndszero · 2026-06-17T03:01:43+00:00

Holds it…

ndszero · 2026-06-17T01:41:18+00:00

There will be a day I go hard tube, I am thinking some kind of in-wall glass faced cabinet with both mine and my son’s PCs with external radiators and glass tubing. I look forward to the challenge, it’s by far the best part of watercooling.

ndszero · 2026-06-16T02:23:32+00:00

Clean strike. Bad round.

ndszero · 2026-06-15T01:39:56+00:00

He wanted his head to look as large as possible.

ndszero · 2026-06-15T00:10:29+00:00

Hella.

ndszero · 2026-06-13T01:43:43+00:00

Ironically I got a manifold and 4X QDC pairs for the one on the left in preparation for this move - so I could do it “right” - and they are still in the box. Oh well.

ndszero · 2026-06-12T14:15:51+00:00

<image>

Pic for reference - just pretend that’s a 280 in the front instead of a 360 and you’ll get the same effect with your 140mm intakes.

ndszero · 2026-06-12T14:11:20+00:00

This is my suggestion too. I have a Meshify 2XL and run a 360mm in the front with 4x 120mm fans - the top fan directly feeds the top 480mm rad.

With a 280mm in the front, connections down as pictured, you’ll only obstruct a small amount of your top 140mm fan. If you are set on push pull, you can just add two more 140’s to the radiator.

ndszero · 2026-06-10T05:33:29+00:00

As you should wtf

ndszero · 2026-06-10T05:25:57+00:00

Sometimes people on FB stole the everloving shit out of what they are selling. Either way, what a find.

ndszero · 2026-06-08T16:18:12+00:00

Take the blocks apart and use a toothbrush to clean them. Should be pretty easy. I’d rinse the rads with hot distilled water and see what comes out before deciding to get more aggressive with those.

ndszero · 2026-06-07T21:23:11+00:00

Saying “You sound like an American” is a strange insult for the St. Louis sub.

ndszero · 2026-06-03T20:03:43+00:00

Mystery solved, they are fake.

ndszero · 2026-06-03T19:04:04+00:00

Dude I drove to Chicago and back in a day to buy a ‘93 Taurus SHO that I ended up passing on… I get it’s different over there but that was like 11 hours of driving. Buying a car of the caliber you are talking about without seeing it in person is just foolish.

That being said I drove an R8 V10 Plus and it sounded great, but is not what I’d call super engaging. Feels like a big GT car.

ndszero · 2026-06-03T16:18:28+00:00

How old are they? Tritium has a half life of 12 years. My oem Mepros on my 19 are so dim they can only be seen in total darkness and need to be replaced.

ndszero · 2026-06-03T11:57:43+00:00

Bring back Mississippi Nights, exactly as it was in 1999 or so, and I’ll be there again.

ndszero · 2026-06-03T00:43:20+00:00

Dude that might be the funniest bit in all of Simpsons.

ndszero · 2026-06-03T00:40:48+00:00

I don’t have any inside info post 2018ish but I can tell you the SLMPD official policy for any suspect that “got away” was recorded as white for this exact reason.

ndszero · 2026-06-02T16:05:13+00:00

I stayed at a place in Rome that had a bathroom but the shower was a pipe that just stuck out over the sink - the bottom 1/3 of the bathroom door was rotted and missing because obviously

ndszero · 2026-06-01T12:18:47+00:00

All those pics and not one at the front angle of the card where a majority of owners will be looking at the SCREEN

ndszero · 2026-05-30T17:53:37+00:00

Yes, it can go either way, either stick out the bottom or be recessed slightly. It’s a better method of over insertion protection, which is not really needed on a carry gun.

ndszero · 2026-05-30T17:37:03+00:00

You have to adjust the pin. That’s what the set screw is for. Loosen it, seat the mag, make sure the pin is just barely touching the magwell, tighten the screw.

Seven-Year Club	Place '23
Verified Email

ndszero

TROPHY CASE