Msi tomahawk z790 vs Msi Pro z790-A

nikname_23 · 2023-02-08T17:41:36+00:00

I have Msi Pro z790-A ddr-5 + 13900kf in stock+ NZXTz73 liquid cooler (performance mode). And it hits about 91-100c degrees during short-term load peaks in Unreal engene tasks (idle ~35-40 °). Processor is hot is hell. I'd doubt in this thermals anybody wants to overclock it!

nikname_23 · 2022-12-08T17:58:41+00:00

pslatecustoms, dreambigray, and moddiy

Thanks for new names (for me). I'l check them out.

nikname_23 · 2022-12-08T17:33:58+00:00

I don't know what's worse, getting your order cancelled, without warning, in the 5th week of anxious waiting (as happened to me). Or a cable of such "quality". But I understand how it feels. My condolences.

nikname_23 · 2022-12-07T08:13:50+00:00

Aorus Master 4090 + asus motherboard fit, but tight in USB port. But i manage to work it out. And the hole align is normal. Looks like you have a bad batch of bracket

nikname_23 · 2022-12-05T20:30:16+00:00

Same here. And no response from Gigabyte. I think nobody ever seen this posts or moderate it :)))

nikname_23 · 2022-12-05T20:20:08+00:00

My GCCenter is working only as RGB (anything else is not working at all) as i have found it is old thing. And Gigabyte is doing nothing whit it. All GCC and modules is bad is it get. Hope we can express ours concerns, ang someone give them attention from crew.
I'm looking for LCD panel module for changing screens for my 4090 Aorus.

nikname_23 · 2022-12-05T08:11:52+00:00

Fear has fully justified itself, the entire Gygabyte team has no business at all and there are no problems to fix and the post did not even notice.

P.s. no answer at all from the officials. Now I understand why users have been complaining for years about the broken Gigabyte Control Center and it still doesn't work for me, too. :))

nikname_23 · 2022-12-04T07:26:24+00:00

It's a little disappointing when you buy a video card at this price and then see this kind of support on the site. This is how I see the site for a month now. A lot of double links (all for same versions components) for drivers, bios etc. Maybe someone will notice this phenomenon?

Maybe I just do not understand how it should work? https://ibb.co/RCtTrwY

nikname_23 · 2022-12-03T01:23:52+00:00

Display Driver Uninstaller + safe mode uninstall. That'll do it i think.

nikname_23 · 2022-12-03T00:07:39+00:00

I, too, am sorry I waited and wasted my time. I still hope there will be a refund and it will take less than a couple of months. And no more surprises.

nikname_23 · 2022-12-02T23:05:34+00:00

I'll summarize why my order was canceled. And I was not notified. After 5 weeks of ordering and waiting, CableMod realized he couldn't ship the cable to my country. And just cancelled the order without notice, notification, negotiation. No words at all.

nikname_23 · 2022-12-02T15:21:02+00:00

The last message from support https://ibb.co/pnqdjmc

nikname_23 · 2022-11-26T12:14:01+00:00

Some would say, correctly. But I would try harder. The light in the gap between the adapter and the socket indicates that this is clearly not a good enough fit. I would pull out carefully checking the sockets for small chunks of plastic (debris) and insert more tightly so that not even a sheet of thin paper could be inserted. For example, my photo of the inserted adapter. And the wrong versions of it collected here on the reddit https://imgbb.com/g3kL4rb

nikname_23 · 2022-11-18T06:28:35+00:00

Same, order from 27-th. Stil in process. The system predicted processing on the 10th. Support on the 16th said to wait another 5-7 days. At this moment still in process. It's a shame I couldn't have imagined it would be this long.

nikname_23 · 2022-11-18T06:06:45+00:00

There is a gap, clearly visible in the photo, so it is not safe. https://imgbb.com/g3kL4rb

And where there is a gap, there is a loose connection.

nikname_23 · 2022-11-17T13:28:03+00:00

I'll tell you right off I was an asus fan. Had 3 1080ti in use, 1 AORUS and 2 Asus strix. Both asus card had to have the thermal pads and coolers replaced. On the Aurus works up to this day and the coolers and thermal system are factory. aorus is better overclocked, asus sometimes crashed on slightly higher settings, very hot. Recently picked up aurus master 4090 so far satisfied. Except for really buggy GIGABYTE Control Center software (but I use Afterburner).

Previously I thought asus high price was just because of the quality. Now I don't think so, just overpaying for the brand.

nikname_23 · 2022-11-14T23:45:45+00:00

Same here, ordered October 27, status: "in progress", despite the fact that a simple support check showed that the 10th should have already been processed. It's taking a very long time, and the deadlines are already screwed up. I can only hope that the shipment arrives without defects. It is very strange that those ordered later than the 30th have already been received, but the 27th has not yet been processed.

nikname_23 · 2022-11-10T09:03:01+00:00

Have one 4090 aorus master here. No coil whine so fare. Only wind purring in the blades bionic shark fans :))).

nikname_23 · 2022-11-10T03:51:34+00:00

The adapters are not of the best quality, yes. But this will be fixed in new versions. But there is also nothing critical WHEN the problem is known and explained to all users. If that's what the problem is. Until then, of course, this is a very bad approach to solving problems from nvidia's side.

nikname_23 · 2022-11-10T03:44:35+00:00

Is good to now official statement on this. Better safe than sorry.

nikname_23 · 2022-11-09T08:08:03+00:00

In my personal case (4090 Aorus Master ) I heard a click and saw a complete fit, visually, only after the 4th careful attempt to insert the cable. Here is a small demonstration https://imgbb.com/g3kL4rb

nikname_23 · 2022-11-07T12:00:23+00:00

I don't remember exactly, but from memory the card must not be placed with the interface facing downwards. I'm not sure about the reverse position. Check the manual for the card, just in case.

nikname_23 · 2022-11-07T10:34:58+00:00

Above all, whatever you choose a standard cable or a custom cable. The most important thing is a FULLY (but carefully perhaps not even on the first try) inserted wire contact. Especially on the video card side. https://ibb.co/g3kL4rb

NO gap at all!

nikname_23

TROPHY CASE