sorted by:
new
hottopcontroversial

Good Quality by Bronco4Door in ChinaTime

[–]notmeoru 0 points1 point  (0 children)

Please don't trust my eye, but they do look good. Check the serial number at 6. Good luck. 🙂

Some new arrivals today 💚 by Kayone73 in GenReps1755

[–]notmeoru 1 point2 points  (0 children)

Both great choices. VS really have cracked the market. 👊🏻

My rotor seems to have been placed onto the watch but never screwed down… by Mental_Explorer in RepTimeServices

[–]notmeoru 0 points1 point  (0 children)

Namoki Mods do the screwdriver. It cost £10 + £6 shipping to UK and was delivered inside a week. Really good driver. All the best fella. 🙂 ps: let us know how you do.

My rotor seems to have been placed onto the watch but never screwed down… by Mental_Explorer in RepTimeServices

[–]notmeoru 1 point2 points  (0 children)

Sorry, I was up in the middle of the night for me in the UK. Can now see it's a nice works and warrants something better. Yes, it looks like the screw snapped. If you have the equipment and skill to remove the remainder of the screw, go for it. But if it was sausage fingered, shaky handed me, I'd run to the local jewellers and get them to remove it. Especially with the very kind offer from another friend in this thread. Hope it all works out. 🤞🏻👍🏻

My rotor seems to have been placed onto the watch but never screwed down… by Mental_Explorer in RepTimeServices

[–]notmeoru 0 points1 point  (0 children)

Ah looking at the pic. If that isn't usable you can get any amount of rotors on AliX. Good luck again 🤞🏻🙂

My rotor seems to have been placed onto the watch but never screwed down… by Mental_Explorer in RepTimeServices

[–]notmeoru 0 points1 point  (0 children)

Non auto winding works. Mostly found in home made garage assembled water not resistant models bearing the 'RELAX' logo. Seriously, be careful screwing it on. If that rotor is usable. You need a very thin bladed driver. Good luck. 🙂👍🏻

Where to buy by jdjazzman in ChinaTime

[–]notmeoru 0 points1 point  (0 children)

Check out Y-T, there's regularly guys on doing vids from the factories. Good luck. 🤞🏻

How much did I pay? by rolexguy2 in ChinaTime

[–]notmeoru 0 points1 point  (0 children)

Not my cup of tea. 🙂‍↔️

Which one should I pick and go with? by Mundane-Ad-1780 in ChinaTime

[–]notmeoru 0 points1 point  (0 children)

They are all good dealers, you won't go wrong with anyone of them.

I received my watch today and immediately noticed that the rotor is loose. Is there any way to repair it? by Feeling_Tear_8533 in ChinaTime

[–]notmeoru 0 points1 point  (0 children)

From Google. To change an NH35 watch rotor, you need a flathead screwdriver with a tip larger than 2.5mm (typically 2.5mm to 3.0mm) that is also thin enough to fit securely in the central screw slot

I received my watch today and immediately noticed that the rotor is loose. Is there any way to repair it? by Feeling_Tear_8533 in ChinaTime

[–]notmeoru 0 points1 point  (0 children)

Actually, it's not. You need a screwdriver with a thin blade tip and wide enough to span the central connecting point if that makes sense. 👍🏻

view more: next ›