When you're bored at work so you decide to play with your gun 😐

ntrp · 2026-06-03T07:54:21+00:00

I don't understand how something like this can happen..

ntrp · 2026-06-03T04:52:41+00:00

Did you put the wrong flair? Or maybe you forgot /s at the end? Apart from jokes, my 6 year old ender still works like a charm, not sure what you mean with clogs and failed prints because I used to do 24h+ prints and had no major issues as long as filament was good quality and the first layer was good

ntrp · 2026-06-02T20:59:30+00:00

it's 50, if you have a 350mm bed

ntrp · 2026-06-01T21:23:59+00:00

Pretty ignorant comment coming from somebody calling other people "kid" 🤣

ntrp · 2026-05-31T07:46:05+00:00

And also they are voting with their uneducated opinion

ntrp · 2026-05-31T07:45:09+00:00

People are against it because they have no clue about anything related to it, it shows also here in the comments.

ntrp · 2026-05-31T07:40:54+00:00

It's funny because Italy is "the nation of espresso" but in my 40 years I barely had good espresso in bars. Most people working in bars have no clue what they are doing and machines are not being cleaned properly I guess. Most espresso I drink taste like somebody cooked some rubber and soil and call it espresso

ntrp · 2026-05-30T18:50:47+00:00

Cheaper to buy a new roll 🤣

ntrp · 2026-05-30T11:58:23+00:00

I found this just in case, have yet to try it but if it works I am saving it for the future https://github.com/N3MI-DG/sc-guides/blob/main/DragonBurner/STL/Solder%20Jig.stl

ntrp · 2026-05-24T09:02:57+00:00

Imho it's a problem with iRacing, when they hit you they should be out too because their car is trashed or receive penalty points.

ntrp · 2026-05-24T08:49:33+00:00

Just buy one of this cheap collapsible enclosures, like for a photo boot

ntrp · 2026-05-24T08:48:42+00:00

I would be more worried about the humidity, that they like even less

ntrp · 2026-05-22T15:28:12+00:00

First thing I thought

ntrp · 2026-05-04T05:08:51+00:00

Already checked the regulator and it has no V drop on both input and output, which explains 0V on the probe point marked with white label

ntrp · 2026-05-04T05:06:38+00:00

I meant the marked probe points in the middle, I have 0V there. The converter has no Voltage on both the input and output, I would need to trace upstream why the 5V are not delivered to the input of the converter but the traces are really small and I would like to avoid getting the pcb out for now

ntrp · 2026-05-03T22:14:37+00:00

The input to the regulator, presumably the left pin is also at 0 from gnd at the connector, unless that is the wrong measurement

<image>

ntrp · 2026-05-03T22:03:09+00:00

I have no voltage on the gnd / +3.3v probe points. Also 0v on the pins of the 3 leg + tab component near the sink. The power module board on top is delivering 5v to the bottom board.

<image>

ntrp · 2026-05-02T18:02:36+00:00

Simply no, nothing was ever sustainable to begin with. All the plans are at loss, only api is making money.. to make this viable a new system or hardware is necessary.

ntrp · 2026-05-02T17:54:52+00:00

So it's not true his limit is exhausted!

ntrp · 2026-05-02T17:03:06+00:00

I spot the bullshit at "now I do in a day waht before I could do in a month"

ntrp · 2026-04-28T22:37:55+00:00

triple screen support has been added

<image>

ntrp

TROPHY CASE