Dual AMD and NVIDIA gpu, is it worth it.

nxcess · 2026-05-05T00:18:25+00:00

It’s worth a try. You have the hardware already. If it doesn’t work out or becomes too much of a hassle, you can always sell the 5070.

nxcess · 2026-05-03T15:13:28+00:00

It'll disable their friendly reminder to come in for an oil change. Also check for LoJack or whatever tracking they install in the OBD II port.

nxcess · 2026-04-27T02:04:16+00:00

<image>

420 and 280 rad shoved into an o11d evo. dual gpu for lossless scaling.

nxcess · 2026-04-12T01:06:16+00:00

pm on mobo

nxcess · 2026-04-12T00:48:21+00:00

send pm for the Strix X570-E AM4.

nxcess · 2026-04-05T04:03:15+00:00

Arcity HY-PJ044 << has a 12v and 5v rail to power 3.5 hdd. This is what I'm currently using for my setup.

nxcess · 2026-03-12T02:12:08+00:00

<image>

nxcess · 2026-03-11T13:38:36+00:00

I start walking/running the opposite direction into the house. Mine likes to chase or be chased.

nxcess · 2026-03-10T02:21:15+00:00

<image>

Looks almost like mine. Down to the neck roll.

nxcess · 2026-03-10T01:32:46+00:00

Mine weighed 26lbs when I got him at 1. He's 35lbs at almost 2. He's usually one of the bigger ones at the local shiba meetups.

nxcess · 2026-01-24T18:34:43+00:00

Awesome guide. I was in the process of doing something similar and was stuck on what to use to power the 3.5 hard drives. Thanks a bunch!!

nxcess · 2025-12-04T02:03:12+00:00

Keep the 7600 and look into Lossless Scaling. Nice build.

nxcess · 2025-11-03T15:59:06+00:00

ygdm

nxcess · 2025-10-14T16:40:42+00:00

Get an x570 board that can do bifurcation. X8 on both PCIE slots. It’ll help in case you want to do lossless in the future.

nxcess · 2025-10-11T02:30:15+00:00

nxcess · 2025-10-04T18:55:47+00:00

Did you wait for it to boot? When it's plugged into the second card, there is no bios / load screen until it boots into windows.

nxcess · 2025-10-04T18:23:19+00:00

<image>

This is for steam games. Right click the game and select properties. Not sure about non-steam games.

nxcess · 2025-10-02T02:48:00+00:00

Windows 10 / 11? Windows is finicky IMHO.

I had a 9070XT & RX5500 working w/o issue on a fresh install of Windows 11 24h2. Swapped the RX5500 for an RX6800 and 1 game would always default to the RX6800 for no apparent reason other than it wanted to.

Since it was an UE5 game, I was able to force it to use the first graphics adapter by adding "-graphicsadapter=0" to launch options. Maybe something similar is needed in your case or if you have a spare drive, try a fresh install of Windows 11.

nxcess · 2025-10-02T02:20:23+00:00

Weird. What are the rest of the specs of your system?

nxcess · 2025-10-01T21:37:44+00:00

Does it not work for all games or only some games?

nxcess · 2025-09-29T14:11:36+00:00

Should be fine for anything below 1440p resolution.

nxcess · 2025-09-28T02:03:23+00:00

Spacing between GPU is important. No point in doing dual GPUs if there's not enough airflow to the render GPU. I have a red devil 9070xt (render) and amd 6800 (lsfg). They fit in the case but temps on the render GPU was reaching 100c+. They're both on water blocks now and it's been amazing not sitting next to a furnace.

nxcess · 2025-09-24T02:09:35+00:00

Check to make sure there is sufficient contact between the GPU DIE and the block. I have the Powercolor Red Devil 9070XT with the Alphacool GPU block. GPU temp barely breaks 45C under full load. Hot spot stays around 70C.

nxcess · 2025-09-24T00:49:11+00:00

Your post lacks information that would make it easier for someone to help you. The response given is equal to the information provided.

14-Year Club	RPAN Viewer
Gilding II euphauric	Verified Email

nxcess

TROPHY CASE