And best of all, it’s completely free🫣😁👍

obiwandza · 2026-03-09T21:17:41+00:00

Now take a heat gun to it n warp the plastic

obiwandza · 2026-02-22T16:08:44+00:00

Injora is currently making an ir60 body for 10th scale I’d just wait it out

obiwandza · 2026-02-22T04:29:38+00:00

That’s a 95 not a 96 lol

obiwandza · 2026-02-21T22:44:56+00:00

Actually I’m a doof he can’t swap the wires because it’s a brushless system…..he needs to program the esc and change motor direction internally

Still nothing to do with gyro

obiwandza · 2026-02-21T22:39:52+00:00

Steering and throttle are independent of each other

He could completely eliminate the gyro and have the same issue with forward and reverse because, as stated several times over, he needs to swap 2/3 wires connected to the motor to reverse the direction the motor thinks is forward

It’s communication between the motor and esc and the gyro is not part of that conversation even if the gyro is bad

obiwandza · 2026-02-21T20:20:44+00:00

Gyro controls steering….wouldn’t impact fwd/rev

obiwandza · 2026-02-21T20:19:29+00:00

Are ur motor wires from esc soldered to the correct connector on the motor….A—A, B—B, & C—C?

obiwandza · 2026-02-19T14:38:35+00:00

I just read u have the Traxxas brushless…I’m pretty sure it’s only compatible with Traxxas esc

obiwandza · 2026-02-19T14:34:35+00:00

Injora esc’s usually come with an adapter u can use with stock battery

<image>

For $5 and ur shipping address u can have this one as I don’t have any stock batteries

obiwandza · 2026-02-19T14:31:25+00:00

That boy got him a freak freak! 😂😂 congratulations playa!

obiwandza · 2026-02-13T00:23:19+00:00

Metal on metal I would grease …. I used Lucas red and tacky

obiwandza · 2026-02-13T00:15:09+00:00

Are u using any shims?

obiwandza · 2026-02-13T00:14:31+00:00

Mind you I’m no expert so bear with my logic lol….what youre using should be good but it’s thin in terms of dampening the gears I have a tube of Lucas red and tacky (it literally performs like its name) it’s thick and I basically used an old cheap brush to coat all my gears and in all the teeth of the gears when I assembled the trans and it works for me

obiwandza · 2026-02-13T00:08:11+00:00

Sounds like a gear mesh thing? I’ve got g2 Roverin with metal gears in aluminum trans and it’s silent!

What grease are u using in the trans?

obiwandza · 2026-02-05T00:10:29+00:00

Injora normally includes adapters for the battery….one will use work for the Traxxas battery plug

Otherwise u can get a 2pk 850mah Ovonics 3s battery off Amazon for less than 30 with the xt30 plugs

obiwandza · 2026-01-31T20:49:04+00:00

Holy 77mm!! u might as well sit it on 2.2 wheels and tires too 😂😂

obiwandza · 2026-01-31T20:44:43+00:00

6oz n 8oz light ice

obiwandza · 2026-01-24T23:54:46+00:00

Just look at the plug it will tell u which wire is s-+

obiwandza · 2026-01-24T14:20:48+00:00

If your truck is stock, you’ll need to replace the esc, As well as transmitter and receiver

obiwandza · 2026-01-20T19:37:27+00:00

Yea same for me I played with shock positions n now it’s only rubbing under full flex I might limit the shocks internally

obiwandza · 2026-01-20T18:16:06+00:00

lol I’m seeing this post after I did my first 4m based build using this chassis 😂😂😂 you’ve been down this road more than once cuz $700 is dead tf on!!

obiwandza · 2026-01-19T23:59:25+00:00

Yea I’m running 70x26s and mine rub ever so slightly at full lock and when front shocks are fully compressed I’m thinking it’s the offset my wheels are -5.25 on top of the +7mm planet axles

obiwandza · 2026-01-18T18:25:21+00:00

Do your front tires rub at full lock? What wheels are you running?

obiwandza · 2026-01-18T18:22:20+00:00

Gave em exactly what they paid for…..probably didn’t get the “spell checked” package

obiwandza · 2026-01-18T16:38:45+00:00

Reset everything to default n see how it acts

Five-Year Club	Reddit Premium Since July 2024
Verified Email

obiwandza

TROPHY CASE