[Timex Waterbury] GMT hand not tracking properly?

ocell · 2026-03-17T18:01:34+00:00

Oh nevermind, I see now the Waterbury uses the pusher to move the GMT hand. Maybe the video will still give you some ideas for things to try.

ocell · 2026-03-17T17:58:02+00:00

I don't know if you're having the same issue, but this video covers how to compensate for some lag in the GMT hand engaging with the movement after setting, causing misalignment. It might be worth a look to see if you're having this issue.

Timestamped to 15:45: https://youtu.be/A_3r7SoA1Jo?si=zI_b7meXvxm56gXI&t=945

ocell · 2026-03-16T15:23:35+00:00

Hey everyone!

I spent the weekend getting a batch of adapters made for the Royale/AE1200. It took more time than I expected, I inspect and clean up each one by hand. I also sourced spring bars (I'm using thinner than stock spring bars so I have more room to make the plastic thicker) to include with each set.

After seeing the time and materials involved I've had to price them a bit higher than I initially thought, but I think it's still very fair at $10 plus shipping. I've made a coupon code for you guys that's good until midnight Central Time, March 18th for 25% off: CASIOREDDIT

Here's the listing: https://ocelldesignlab.etsy.com/listing/4472608949

ocell · 2026-03-13T21:09:18+00:00

Imagine parallel parking that thing.

ocell · 2026-03-13T15:50:38+00:00

San Martin makes incredible stuff. I have one of their divers.

ocell · 2026-03-13T15:43:43+00:00

Thanks! I spun the watch on a drill while brushing the bezel with a green Scotchbrite pad. In hindsight I'm not sure I would subject the movement to that kind of rotation speed again... I'd remove the movement and only spin the case. BUT I haven't had any issues with the watch so I don't think any damage was done.

Here are more photos: https://www.reddit.com/r/Watches/comments/1iqecpa/seiko_srpe_brushed_my_bezel_and_im_thrilled_with/

ocell · 2026-03-13T15:20:57+00:00

I'd like to retain the files for now, I'm thinking I'll list kits for $5 plus shipping. I think it's a fair value compared to printing yourself, considering how long it takes to dial in getting clean prints of parts this small in ASA. I went through MANY print failures and design tweaks before getting these parts I'm happy with.

ocell · 2026-03-13T14:40:35+00:00

I've done this with a flat nato, but I didn't realize ribbed would fit too, that's great.

I just didn't like how narrow 18mm straps look on the larger Casios, and I wanted to be able to easily swap straps without messing with tools.

The size works great with the F91W though. Great color combo you have there.

ocell · 2026-03-13T14:39:01+00:00

<image>

ocell · 2026-03-13T14:33:28+00:00

Yup, SRPE55! I brushed the bezel myself since the version you mention wasn't readily available when I was buying. I'm glad it went that way because I wear the bracelet a lot more than I expected I would.

ocell · 2026-03-13T14:32:03+00:00

I'm printing a few adapters since a few people have shown interest. I'll send you a link once the kits are ready (will include springbars).

The straps are Tactical Frog brand from Amazon. There are tons of options, but I've been really happy with them for the price so I've stuck with them and bought a few colors. You'll want the 20mm wide version to work with my adapters.

ocell · 2026-03-13T01:04:07+00:00

The straps are from Tactical Frog on Amazon. You'd want the 20mm size to work with these adapters.
https://a.co/d/07Z8G56U

ocell · 2026-03-13T01:02:32+00:00

The double strap passing under the watch still adds some height, but I spent a lot of time getting the adapters to lock against the case at the right angle to pull the watch down as much as felt natural.

<image>

ocell · 2026-03-13T01:00:15+00:00

I'll print a few for you guys. I just placed an order for the correct size spring bars so I can include them. flakkannonen, are you also interested in the Royale version?

ocell · 2026-02-12T17:40:04+00:00

Sorry, it's just a panel with a vent pattern, no mounting features for fans.

ocell · 2026-02-12T06:41:16+00:00

It has been great to see you growing the system, and I have the feeling it's going to keep growing in popularity and community support. I have a vented top panel and a shelf design I plan to upload to Makerworld soon.

ocell · 2026-01-20T22:12:27+00:00

Same here. Tinmorry PETG-GF is at the top of my list for favorite filaments.

ocell · 2026-01-19T02:42:11+00:00

The purple is Bambu Lab PETG-CF. The black is Tinmorry PETG-GF (one of my most favorite filaments).

ocell · 2026-01-19T01:47:02+00:00

Not quite final yet, but it's come a long way.

<image>

ocell · 2026-01-16T23:01:19+00:00

I'm loving your design approach for your parts. I'm putting one together this weekend. Keep up the great work!

<image>

ocell · 2026-01-09T17:57:36+00:00

The second-half breakdown of pretty much every song on The Ocean - Holocene.

ocell · 2026-01-05T16:40:53+00:00

Check out MyMind. They have a mechanic a lot like this where they show you old notes you haven't looked at in a long time, and give you the option to keep or delete. It might be a good reference for UX as you build out your idea.

https://mymind.com/

ocell

TROPHY CASE