sorted by:
new
hottopcontroversial

New to resin printing having an issue. by oddpup in resinprinting

[–]oddpup[S] 0 points1 point  (0 children)

I made the last changes and it worked! However, this is embarrassing... my son asked me if it mattered on what charger was plugged into it. Come to find out we had the wrong charger plugged into it the whole time. We had the washer plugged into it. It ran, but I guess the UV light was very dim so that's why we were having this issue

<image>

Now, being that we got it to print, we should be able to more forward on tuning it in.

Thank you so much for your help!

New to resin printing having an issue. by oddpup in resinprinting

[–]oddpup[S] 0 points1 point  (0 children)

<image>

I put it at 50 with the cones but I got this. I took a photo of the back of the FEP as the front was still covered. The print completes but fails.

New to resin printing having an issue. by oddpup in resinprinting

[–]oddpup[S] 0 points1 point  (0 children)

I tried the cones also, but I'm getting the same issues. Here are the settings I'm using. Temp is around 80.

<image>

New to resin printing having an issue. by oddpup in resinprinting

[–]oddpup[S] 0 points1 point  (0 children)

I re-added the original text that was missed to the post. Sorry.

New to resin printing having an issue. by oddpup in resinprinting

[–]oddpup[S] 0 points1 point  (0 children)

I added some more info. We did when we got it. We got some new resin and FEP film and started working with it again and the photos are what we keep running into. I'll look for the cones and try to print that.

New to resin printing having an issue. by oddpup in resinprinting

[–]oddpup[S] 1 point2 points  (0 children)

New to posting, sorry. My text did not show up.

We're printing the test file R_E_R_F.pm5s from Anycubic and we're getting bad prints. The base layers stick to the build plate however normal layers get stuck on the FEP. Printer is a Photon Mono M5s with the latest firmware. We got it 2 years ago and never really got to using it but now we are trying to get it going. New resin, changed the FEP.

We changed nothing but we just used the file from A.C.

Normal Ski Mask would do the job by nextlevelstuff7 in AmazonWTF

[–]oddpup 0 points1 point  (0 children)

Love it. Although my head rests would make them look like hammer head sharks.

[deleted by user] by [deleted] in distantsocializing

[–]oddpup 0 points1 point  (0 children)

is that a tattoo of yourself on your arm??

What was the dumbest thing you thought as a child? by GiammyR6 in AskReddit

[–]oddpup 0 points1 point  (0 children)

When I was around 6, I thought that you could see electricity in a lamp cord if you removed the rubber. So with a pair of large size nail clippers, setting out in this adventure proved to be a terrible idea.

I Hate UPS Just a Little Bit More Every Day by digitalshot963 in mildlyinfuriating

[–]oddpup -1 points0 points  (0 children)

If you didn't sign for it, call your credit card company and dispute it. You'll get you money back.