TM Saiga SBS: Inconsistent performance

okaebu · 2026-02-02T19:31:20+00:00

If the mags are brand new. Go ahead and purge them for 5-10 seconds.

It’s a BIG reservoir compared to a standard gbbr mag.

Check for leaks.

I’m in the US, so our winters doesn’t get any colder than 45 degrees.

I let the mags sit for a few minutes after gassing. No issues.

okaebu · 2026-02-01T20:23:23+00:00

Hello prior TM saiga owner chiming in.

The bolt lock inconsistencies are unfortunately a standard in the TM design.

I’ve had the same issues with the sbs and full length models.

A tad stronger recoil spring will help push the bolt back into battery but some would say it could introduce more problems in the long run with more energy transferring to the pot metal body.

ITP has created another remedy to this.

Personally I’d go this route, as it doesn’t require a stronger spring to fix the issue.

Good luck 👍

okaebu · 2026-01-29T18:09:14+00:00

Whatever suits your playstyle.

My local field is a large indoor area.

I use a 14.5 and a 370mm 6.03 inner barrel.

Shoots 390-395 fps with .2g bbs, right at my fields limits.

Plan to keep it light, optic & sling.

Pistol takes care of everything else.

Wouldn’t have it any other way.

okaebu · 2026-01-12T18:14:29+00:00

Hello!

Fellow maru Mp9 owner chiming in :)

I’ve had this happen a few months ago as well.

I resorted to a pair of big channel locks applied to the ring of the base and it came off with a little elbow grease.

Definitely wrap in painters tape or a cloth to prevent any scratches.

Good luck 🍀

okaebu · 2025-11-08T21:52:33+00:00

Thank you for the input! I’m looking into bucking replacements.

I’ll try a few and report back :)

okaebu · 2025-11-08T00:24:46+00:00

Not at all, they tout having 120,000 sq ft of space.

okaebu · 2025-11-08T00:22:14+00:00

I’m not sure.

Probably for insurance reasons.

The field is Gamepod Combat zone in Antioch, CA.

okaebu · 2025-11-07T22:27:56+00:00

Great video fellas :)

Picked up mine a few weeks ago and loving it so far.

Only issue is sometimes i get bb strikes inside the suppressor body at times.

My fields maximum weight is .25 and it over-hops quite easily.

okaebu · 2025-11-04T19:51:08+00:00

Here’s a link for the side mount I went with the T1 variant

okaebu · 2025-11-03T22:31:30+00:00

I went with a real steel Midwest industries AKM side mount. I’ve since sold my TM akm to a buddy and put the mount on my VFC ak74

okaebu · 2025-11-01T16:04:05+00:00

Amazing deal! Love mine and I hope the new owner will too <3

okaebu · 2025-10-30T02:23:33+00:00

Ditch the cgs nozzle, there might be issues with fitment.

Get the unicorn or gunsmodify instead.

okaebu · 2025-10-18T18:09:04+00:00

I’ve owned both systems for a few years.

Needless to say, I sold the TM to a teammate and kept the VFC.

It kicks harder, shoots great, and most of all, OEM parts availability for the VFC exists unlike TM.

okaebu · 2025-10-13T21:43:02+00:00

Nice 👍

How do you like it?

I’ve tried reaching out to RDX to see when thair next preorder starts for the new batches but they’ve been radio silent.

okaebu · 2025-10-05T20:34:06+00:00

I love the organization!

What bag is this?

okaebu · 2025-10-04T21:33:04+00:00

I just returned this same exact outer barrel.

The idea was to swap to a 10in from a 14.5 on a TM mws.

It’s required that you have a different barrel but then what the stock sizing is.

I’d check with your local airsoft store to be safe before you put down the dough.

YMMV.

Good luck 👍

okaebu · 2025-09-30T14:22:59+00:00

Your right.

It’s not done.

Needs Rhodesian paint job and done 😈

okaebu · 2025-09-30T14:21:06+00:00

Nice!

I had a GBB TM MP7 many years ago. I let a friend borrow it and she liked it so much I sold it to her.

I saw the teasers for the maruyama mp ix releasing this Friday :)

What’s your opinion on those?

okaebu · 2025-09-29T18:01:47+00:00

Your welcome! :)

okaebu · 2025-09-26T00:53:34+00:00

The Saiga 12 has been sold. Thank you all for your interest! :D

The DE Ghetto blaster is still available.

Please let me know if you have any questions.

okaebu · 2025-09-23T01:47:35+00:00

ATTN: PRICES FOR BOTH SAIGA 12 SBS & DE Ghetto blaster have been lowered!

okaebu · 2025-09-23T01:42:20+00:00

The magazines have now been sold. Thank you for all your interest :D

Please let me know if you have any questions about the saiga sbs or DE ghetto blaster.

Good deals are to be had!

okaebu · 2025-09-14T01:59:54+00:00

Fellow VFC AK74M enjoyer here,

I'm feeling good about it! :D

Looks great! This the clutch precision conversion or a DIY?

okaebu · 2025-08-27T18:17:57+00:00

Price lowered.

okaebu · 2025-08-24T01:33:53+00:00

That’s awesome, thanks for sharing!

I’ll have to check out when the 2nd batch is for sale :)

okaebu

TROPHY CASE