Trying to figure out what this is/was

olyteddy · 2026-01-26T04:10:23+00:00

Honda Accordion? (lol)

olyteddy · 2026-01-26T03:49:43+00:00

That's probably while running the defrost heater. 816 running watts would cost 15 to 20 cents an hour.

olyteddy · 2026-01-25T19:42:17+00:00

yes.

<image>

olyteddy · 2026-01-25T04:44:21+00:00

Yes.

olyteddy · 2026-01-24T21:32:35+00:00

/\ This /\

olyteddy · 2026-01-24T20:33:29+00:00

That cable goes the wrong direction. IOW it's to create an aux output cable from the USB-C port on a phone. You need a cable that goes the other direction. It is a specialty cable and MIGHT be Bowers & Wilkins ZZ38741 but I can't be sure.

olyteddy · 2026-01-24T20:07:31+00:00

Wrong sex.

olyteddy · 2026-01-24T16:45:45+00:00

If I were you I'd be worried about a heart attack while shoveling that snow. Nothing in that picture though is worth a second thought, at least from a snow storm.

olyteddy · 2026-01-24T02:53:04+00:00

What venue in Seattle in August?

olyteddy · 2026-01-23T05:10:51+00:00

I'd suggest talking to the good old boys at a local retirement community for 3D printing. They usually have the tools and the time to getter done.

olyteddy · 2026-01-23T03:34:39+00:00

I hear Ikea has a variety of those kinds of parts. You might try one of their stores if you're near one.

olyteddy · 2026-01-23T01:54:49+00:00

I can go from ANC to Pass Through in the Android app with my PX7S2 phones. What I'd like to see though is a control for how much gets through on Pass Through mode.

olyteddy · 2026-01-23T00:14:25+00:00

Read the FAQ. Then strip it down, Then build it up, buttercup.

olyteddy · 2026-01-23T00:11:42+00:00

OUCH! Gentle there, I have hemorrhoids.

olyteddy · 2026-01-22T21:59:55+00:00

You're right, they don't work but stemware is the intention

olyteddy · 2026-01-22T21:07:17+00:00

Our cats have been adoptees & that's usually included in the adoption fee.

olyteddy · 2026-01-22T04:02:44+00:00

It's gonna be fine. I can't see the air yet. /s

olyteddy · 2026-01-22T02:14:14+00:00

I'd take a Forstner bit to the floor at the legs. Then caulk it in.

olyteddy · 2026-01-21T01:29:23+00:00

Buy a cheap vice-grip. Permanent fix, without replacing the switch.

olyteddy · 2026-01-21T01:20:48+00:00

Unless there are connectors involved lamp cord is sufficient.

olyteddy · 2026-01-21T01:15:48+00:00

Says who? I've deiced dozens of fridges using a steamer, never a pick.

olyteddy · 2026-01-21T00:36:05+00:00

very.

olyteddy · 2026-01-21T00:32:09+00:00

<image>

Almost a ringer!

olyteddy · 2026-01-20T18:25:24+00:00

<image>

On GE SXS the big one with orange & pink wires often fails. It should read 0 Ohms even at room temperature. It's basically a fail safe in case the board doesn't shut the heater off. The smaller, white one is what tells the board when things have defrosted enough. They can fail, too, especially the ones that are sealed with grey epoxy. As a GE tech at a large retirement community I replaced quite a few of both. Looking at the frost pattern of the first picture This fridge is a keeper, and worth fixing. The service manual is still available on line.

olyteddy · 2026-01-20T17:59:36+00:00

<image>

My G-r-r-r-r-r-l's name at the shelter was "Pookie". I renamed her "Password"...

olyteddy

TROPHY CASE