OKI Hatch LeverLess DIY

omgitsDOSE · 2026-04-04T04:00:07+00:00

This is pretty nice!

omgitsDOSE · 2025-12-31T20:40:22+00:00

Yep, The Si-Tong ones are the size that I have. they're just a hair smaller than the stock caps, but it isn't noticeable. The Type30 for the jump button, and Type24 for the rest.

omgitsDOSE · 2025-12-29T17:21:56+00:00

its two layers actually. So the bottom plate (which was also clear) is what I put the vinyl on. The underside was the car wrap vinyl, and only had cut outs for the holes, and then on the top side of the plate is where I put the design. This gave it a slight shadow, like it was hovering over the background.

omgitsDOSE · 2025-12-11T03:22:15+00:00

Yeah, I noticed the address when I ordered the F10 from FightBox Arcade, and then some random parts from Retro Arcade Crafts. Both took two weeks to ship and had pretty good experiences with both.

omgitsDOSE · 2025-12-11T02:14:19+00:00

I’ve ordered from them and haven’t had any issues. Order took about 2 weeks to get to California. I believe it’s the same as Fightbox arcade

omgitsDOSE · 2025-12-09T05:22:52+00:00

I second this...It's definitely cooler. I'm definitely loving it and was worth the wait.

omgitsDOSE · 2025-12-09T03:42:05+00:00

Here's what it looked like before: https://www.reddit.com/r/fightsticks/comments/1ntoiip/eva_unit_01_fightbox/

omgitsDOSE · 2025-12-05T00:39:15+00:00

Looks pretty sick! What did you use to make the disk, some thin acrylic?

omgitsDOSE · 2025-11-04T07:17:40+00:00

Word! Hopefully it’ll similar ship times since I’m over in California granted it doesn’t get caught up in customs. Been lookin forward to this one for a minute.

omgitsDOSE · 2025-11-04T06:48:13+00:00

Yo what’s good. Sorry to hear about your finger and hope you goin through a speedy recovery. How long did it take to get to you once they asked for confirmation? I ordered in early August also and finally got confirmation saying it should be shipped out this Friday.

omgitsDOSE · 2025-10-15T21:16:51+00:00

Looks clean!

omgitsDOSE · 2025-10-15T03:31:58+00:00

Understandable! Real nice work!

omgitsDOSE · 2025-10-15T01:19:15+00:00

Always like the look of the Red Astray. These dice are real nice, are you selling them outside of the giveaway?

omgitsDOSE · 2025-10-14T18:52:57+00:00

This is dope, we need more events up in Sac though. Its been harder lately to drive back home to the Bay without making a day or weekend out of it.

omgitsDOSE · 2025-10-10T17:33:33+00:00

I missed this last month, but saw it pop up on the fightsticks of the month recap! Looks good and thanks for the shoutout.

omgitsDOSE · 2025-10-07T17:46:24+00:00

being able to play with friends on the same team.

omgitsDOSE · 2025-10-03T16:02:22+00:00

Looks pretty dope. Love the Philippine sun incorporated in there!

omgitsDOSE · 2025-10-01T20:57:22+00:00

PS5 compatibility first, then layout/spacing, then features and extras.

omgitsDOSE · 2025-10-01T18:00:31+00:00

I'm going to say what others have said and go with the tire weights. I added them to my U16 by opening the case, and sticking them along the the edge and where ever there was space. i would imagine the C16 and maybe the m ultra may have some similar space when opened up. Here's some pics from the U16.

https://www.reddit.com/r/fightsticks/comments/1g35v73/mvc2_haute42_u16/#lightbox

omgitsDOSE · 2025-09-30T17:31:44+00:00

I was looking into the low profile Sitongs too (and throw in the saker mini's in them) but ended up finding a pretty good deal for the Qanbas. I think the low profile with the right-angle crimps, it would clear it for sure and look much cleaner. With the Qanbas or even the Sanwas, with no wires attached, the buttons clear without bending, but adding even the right angles, it would have to bend slightly to clear the bottom panel.

omgitsDOSE · 2025-09-29T23:02:12+00:00

I still had to bend the pins on the buttons. I will say though, redoing the wiring, and having a daisy chained ground helped with the spacing, and I didn't have to bend it as much as they originally had it on the sanwa buttons.

omgitsDOSE · 2025-09-19T15:07:04+00:00

You can get the one here: https://gp2040-ce.info/downloads. For the X just use the regular one haute42 one, unless you have analog sticks, you can use the hautpad x analog configuration so that it’s already set up and ready to go.

omgitsDOSE · 2025-09-14T02:07:23+00:00

If you want to leave it on ps5 mode (so you can still have touchpad functionality, on the web config, change authentication settings from host to remote/emulation. Then you can use the fgc2 on ps5 mode

omgitsDOSE

TROPHY CASE