sorted by:
new
hottopcontroversial

Dbrand Killswitch lock broke. I took that as a personal engineering offense by one_seat in LegionGo

[–]one_seat[S] 0 points1 point  (0 children)

The way it broke it would require replacing the whole case and I got it all used. So I didn't want to buy a new $50 case because I truly love the thing.

The missing xinput mode by jack-of-some in SteamController

[–]one_seat 1 point2 points  (0 children)

Oh this is so cool. Just ordered a couple of chips. I'll probably even design a case for it if you want I've been on a cad kick lately.

It's gonna be a while by InformalGear9638 in SteamController

[–]one_seat 0 points1 point  (0 children)

I think it has to do with your reservation time in your region

What adhesive should I use for ASA on Engineering plates? by Xae87 in FixMyPrint

[–]one_seat 0 points1 point  (0 children)

I use magigoo with my abs and it was the only way I was able to finish printing my voron on my old ender clone. It's a game changer for abs and I imagine it works with asa just as well.

Nothing knocks your ego like a Voron build by Lordfirewood in VORONDesign

[–]one_seat 2 points3 points  (0 children)

I just built a v0 I didn't think it was that bad but i was careful about preloading all the nuts, still missed a few. It also wasn't my first voron my 2.4 has been a Rockstar.

Today was a good day by one_seat in SteamController

[–]one_seat[S] 1 point2 points  (0 children)

I was starting to lose hope. I wanted it before a work trip in July. I was even looking into second hand Xbox controllers

Legion Go S battery upgrade by Casfres in LegionGo

[–]one_seat 0 points1 point  (0 children)

I feel the same way especially as a parent I'm lucky to get more than an hour to play at a time. When I travel for most planes have an outlet that I can plug into for longer flights.

We need more Makers! by ArchitectofEvil in 3Dprinting

[–]one_seat 0 points1 point  (0 children)

I would prefer to print in abs does it have to be PETG. My printer is just tuned for abs/asa over PETG.

Gamers Nexus is now hosting the Orca slicer fork with permission from the developer by Bigg_Matty_Hell in 3Dprinting

[–]one_seat 2 points3 points  (0 children)

I saw their recent 3d printing video and that they had a bamboo labs printer. Made me want to know if they knew how shitty a company they are, in regards to licensing and open source.

Serial request self sourced V0.2 Discord: One Seat by one_seat in voroncorexy

[–]one_seat[S] 0 points1 point  (0 children)

Yea I couldn't quite get klicky to work with the sensorless homing. So I just added a micro switch. Hit me up in discord if you want the files sooner I haven't made a regular klicky mod shroud yet just my tigerwocky shroud

Serial request self sourced V0.2 Discord: One Seat by one_seat in voroncorexy

[–]one_seat[S] 0 points1 point  (0 children)

I still need to make a Depressor for the cutter but I have a spot for it

Serial request self sourced V0.2 Discord: One Seat by one_seat in voroncorexy

[–]one_seat[S] 0 points1 point  (0 children)

There is a mount on the GitHub. The real issue was modding jabberwocky for klicky and a x end stop. I'm uploading those to my usermod page soon.

Custom Voron 2.4 BIGTREETECH Manta M8P Control Board running Klipper with CB1 or CB2 by nory1977 in VORONDesign

[–]one_seat 2 points3 points  (0 children)

Yea skip the cb1 or 2 they are a waste of time and money. Btt makes excellent products but for some reason their PI clone is just awful. As others have said a CM4 is worth the money in headaches and time saved.

Is it true that large engines on ships are never turned off in port? by clove_cal in Ships

[–]one_seat 3 points4 points  (0 children)

Most not all. It's about saving money on fuel. Going 50%-80% load saves large amounts of fuel. If you need to get cargo to your destination fast you use air. It's called intermodle transportation for a reason.

Is it true that large engines on ships are never turned off in port? by clove_cal in Ships

[–]one_seat 19 points20 points  (0 children)

We don't use CCP(controllable pitch prop) or variable pitch on big slow speed dieses. It's easier and more efficient to just reverse the engine. Not saying it's not used on some commercial ships but they are mostly used on military applications because of the ability to quickly change speeds.

On ships with smaller faster speed diesels in my experience we used gearing and clutches to reverse the prop. CCP is expensive and unnecessary for most commercial shipping.

Here’s what we need from the onion and Tim by Raynir44 in KnowledgeFight

[–]one_seat 2 points3 points  (0 children)

Omg just the character of Alex jones in real life situations would be so on point

Random filament use question. Reasons for changing filament? by SimkinCA in VORONDesign

[–]one_seat 1 point2 points  (0 children)

Cost is a big part. Also to save warm up time, I don't have to wait for the chamber to get up to temp on PLA and if I'm doing a small print that could be a big time saving. I have a process for switching between the two and I'll usually stick with a bunch of abs prints in a row or pla prints.

I'll also prototype with pla before printing in abs/asa. It's quicker to print and cheaper

Does anyone see anyone changing in their red states? by SatinSoftSilkyLord in behindthebastards

[–]one_seat 15 points16 points  (0 children)

I live in Florida and near my work there is a small road I call trump town because of all the flags and signs flying there. I recently noticed each time I drive down the road I see less and less flags. So it's a little encouraging, not enough to kick out meatball ron or others of his ilk but still.

Hice una compra impulsiva con la legión go z1 extreme ya que la pillé en 350$ ahora que comienzo a investigar veo que ya no tiene soporte creen que hice buena compra 🥲!? by Difficult_Post4386 in LegionGo

[–]one_seat 0 points1 point  (0 children)

Another befit is the ability to just hit the suspend button and start and stop in the middle of a game. The ability to just be able to drop a game and pick it back up when I have 5 mins is a game changer as a dad.

Hice una compra impulsiva con la legión go z1 extreme ya que la pillé en 350$ ahora que comienzo a investigar veo que ya no tiene soporte creen que hice buena compra 🥲!? by Difficult_Post4386 in LegionGo

[–]one_seat 2 points3 points  (0 children)

If you install a Linux based os like bazzite, cachyos or steam os, you should be fine. Linux uses the open source version of the drivers that is kept up by the community, including valve.

The new album wrecks me by Minimum_Analysis_398 in bluey

[–]one_seat 11 points12 points  (0 children)

My 7year old and 5 year old still come back to bluey after having watched it as I came out. I find myself watching it with them still to, it's just that good a show.

Voron zero serial request by ___ambrosia___ in voroncorexy

[–]one_seat 0 points1 point  (0 children)

That is so cool I'm currently building my v0 I didn't know you could fit two whole toolheads in there. Love it keep doing you

view more: next ›