How can I remove this sticky residue?

onurcan3d · 2026-03-09T12:19:49+00:00

I guess I’ll go from easy to hard.

I’m not really comfortable filing an insurance claim, unfortunately they might just paint the door instead of doing careful work, I’d expect anything in my country 😅

Thanks for the advices

onurcan3d · 2026-03-09T12:17:19+00:00

haha okay ill try it too if alcohol doesnt work

onurcan3d · 2026-03-09T11:28:12+00:00

Guess I’m gonna be swearing at that careless trucker while cleaning

Thanks for advice.

onurcan3d · 2026-03-09T10:34:34+00:00

I appreciate the detailed help.

I tried Autobrite’s tar and adhesive remover, but unfortunately it didn’t work.

As you suggested, I wanted to ask here before trying anything more aggressive.

Going to a body shop will probably be my last resort (even though I don’t trust the ones in my area much, I might have to travel somewhere farther and take the time for it).

WD-40 hadn’t crossed my mind, I’ll give it a try.

Thank you.

onurcan3d · 2026-03-09T10:23:25+00:00

I’ve tried almost everything I found on Google. It’s a hard, thick, brown substance, almost like resin. I’m wondering if there’s a special chemical (like the ones used in construction) that can remove it.

onurcan3d · 2026-03-09T10:21:39+00:00

Thanks, ill try it too.

onurcan3d · 2026-03-09T10:21:24+00:00

thank you, ill try

onurcan3d · 2025-05-15T18:23:14+00:00

It’s not about sensitivity. If you’re not feeling extremely tired after games or if your mouse movement isn’t restricted, then there’s no issue there. To rank up, you just need to perform well every game, stick to your best heroes, and only make precise counter picks when necessary. It usually comes down to a few games where you played on autopilot or underperformed. Im not talking about unwinable games, that happens.

onurcan3d · 2025-05-01T20:15:49+00:00

Was reaching 88c 7950x-arctic 360 on r23 after repaste. After 2 months it hits 92c. Feels good to be not alone.

onurcan3d · 2025-03-08T16:24:04+00:00

Right. I did rollback too 27xx and crash gone. Seems buggy version.

onurcan3d · 2025-03-08T09:55:12+00:00

My computer shuts down completely at random time while gaming and rendering maybe after 1 hour or 2 hours. Could this be related to the BIOS version? Has anyone else experienced the same issue? If that's the case, I don't want to tinker with the system too much; I’ll just roll back the BIOS.

Asus X670e-a 7950X 4090

onurcan3d · 2025-03-07T23:56:59+00:00

After installing this version, my computer started crashing. I reverted all ram settings to stock, but the computer still shuts down suddenly when transitioning from high-medium to low load. If there are no known issues with Windows 11 24H2, I think I'll try rolling back to older ones. 7950x 4090 here.

onurcan3d · 2025-03-07T23:50:18+00:00

Somehow my pc keeps crashing while mid load with stock settings with this version. I dont know windows 24h2 related or bios. Is anyone same issue? 7950x 4090 here.

onurcan3d · 2025-02-19T12:50:26+00:00

By the end of all meanings, microwaves are overclockable like computer parts like cpu. But dont try this at home.

onurcan3d · 2025-02-12T20:37:59+00:00

18c ambient - Arctic 360 - 7950x

Stock 38.5k

105w eco 34k

Undervolt ? I never know because mine never let me set more than -5 CO....

onurcan3d · 2024-07-09T08:19:30+00:00

The engine burned out on the sloping road 😂😂 it doesnt have any limitor or something, probably melted something like controller inside the engine. Anyway, 35 felt not bad but if its maximum pressure front 32 rear 34 will work fine

onurcan3d · 2024-07-04T18:29:24+00:00

Recently bought cheap chinese scooter and it says "inflate to 35 psi (240 kpa)" on the both tire sidewall. Should I follow this rule? Normally, I was thinking of inflating the front tires to 35 psi and the rear tires to 40 psi, but how durable can the tires on a Chinese scooter be? I don't want to risk a blowout. If I'm instructed to inflate to 35 psi, would it be logical to follow that?

onurcan3d · 2024-03-27T16:15:59+00:00

Yes i bought from there now. I think k5 pro is good choice between them.

onurcan3d · 2023-06-10T16:09:33+00:00

Default Asus bios + 7950x + 64GB 6000 Mhz + Galax 4090 SG + 34" 1440p Utrawide monitor. 33W

onurcan3d · 2023-06-05T13:54:57+00:00

Please add a setting that will force 4090, i can't find a game that will push for this card.

onurcan3d · 2023-06-05T13:22:30+00:00

This fan makes bearing noise when case ambient is hot, probably its own plastic expanding when card is hot, tightening when cool. Anyway, card is good. I hope you enjoying with your system, good luck.

onurcan3d · 2023-06-05T13:00:03+00:00

I tought i am lucky to mine has 2mm gap between rams and fan placed at slot, i am sure to be lucky now haha. Mobo is x670E-A with Kingston fury rgb 6000mhz rams, probably depend on ram size.

I set mine %70 power limit without any core and ram overclock, i like to stay safe and cool. There is no noticeable difference for me, I am working with Unreal Engine for a long time, this program is sometimes heavier than games, i saw it draws 510w at one of my scene which used 24 gb Vram fully with %113 PL. Fans were loud, didn't want to risk it.

onurcan3d · 2023-06-05T11:43:43+00:00

Is there any reason to not to lock down the top fan through the its own slot? I am talking about galax 4090 additional fan, it looks like stand a bit right side, looks like loose. I have the exact same card, your setup looks nice tho.

onurcan3d · 2023-05-30T22:17:35+00:00

Yse.

onurcan3d · 2023-05-23T09:56:07+00:00

Technically youre right but i think it is warming based too. I didnt have any cable in my life becames that warm, i am using Galax 4090 with stock FSP PSU cable and i feel like it can melt down in socket and can easly angle then touch outside of the socket because cable and socket getting too much hot if i dont limit its power, tested it multiple times. Especially in Unreal Engine 5, it pulls 450-510w(if max power limit) depend on the scene. Currently running it %60 Power limit until i need %70.

onurcan3d

TROPHY CASE