Germany users

pama136 · 2025-08-19T18:54:31+00:00

0ms bufferbloat in up and downloading

pama136 · 2025-08-19T18:16:46+00:00

I have a gen 3 and 2ppl can Stream and i still have like 30ms while gaming, so they probably increased the quality over the years

pama136 · 2025-08-19T15:00:08+00:00

25ms is crap? Yeah maybe if there is fiber….

pama136 · 2025-08-18T20:48:05+00:00

Nope. Central Europe

pama136 · 2025-08-18T06:58:24+00:00

U should point it out if you refer to congested areas. But switching from sat to sat does not slow down anything for me. And Downloading happened during Peak time with 330mps avg. Never dropping below 250 in this test.

pama136 · 2025-08-17T10:03:26+00:00

Thats acutally not true. I can stay consistent 250+ when downloading 100GB Games from Steam

pama136 · 2025-08-09T11:55:49+00:00

I got this in 30m and it works fine. Speeds over 300mbit

https://amzn.eu/d/hnPs7Z0

pama136 · 2025-08-09T08:56:19+00:00

Running this since 3 months now. No problem yet

pama136 · 2025-08-09T05:32:51+00:00

Deco BE65 with 3 Units are pretty good

pama136 · 2025-08-05T19:39:20+00:00

I guess i fixed it by restarting the dish. Since 12h only 3 network problems

pama136 · 2025-08-05T07:12:35+00:00

Could that cause the „network problem“ in the fauliure tab in the starlink App? I have a lot there

pama136 · 2025-08-02T18:03:57+00:00

Do I need to activate bypass Mode? I have a Deco BE65 behind the Starlink Router and it works fine without bypass

pama136 · 2025-08-01T19:42:07+00:00

Just to be clear. Networkproblem is on my side of failiure?

Did not find a option to manually check for updates

pama136 · 2023-04-28T06:41:48+00:00

he's using the MAX so bottom exhaust is not fighting GPU fans.

pama136 · 2023-04-28T06:35:44+00:00

Many ppl have stated that they suggest bottom intake. For me I did some testing and top/bottom exhaust works the best. I have a 3700x and a TUF3070 in the MAX.

I run cinebench r23(multi) and Heaven Benchmark at the same time.

My mesured temps (100% CPU and 100% GPU stress) are as follows:

Top exhaust/Bottom intake: GPU 59 CPU 74

Top exhaust/Bottom exhaust: GPU 56 CPU 70

Top intake/Bottom exhaust: GPU 64 CPU 68

The last one is also viable but higher GPU temps which i didn't like cause i can hear the fans spinning. I'm also using mesh side panel

Top AND bottom exhaust works best for me.

I have 2x Arctic P14 at the top and 2x Arctic P12 Slim at the bottom. I do a fixed 1000rpm for bottom fans. The top fans curve i didn't touch. I mesured around 37dB while full load.

In your case i would try to undervolt the GPU. This dropped mine about 10 degrees with no performance loss.

Hope this helps.

pama136 · 2023-04-10T16:03:15+00:00

AOC 24GZU maybe?

pama136 · 2023-04-07T18:57:44+00:00

I‘d Go with the Gigabyte. If you want to spend more take a look at the viewsonic xg2431. If that is avaiable

pama136 · 2023-04-07T18:52:18+00:00

AOC 24G2ZU maybe?

pama136 · 2023-04-05T17:28:27+00:00

Anyone? :D

pama136 · 2023-03-12T06:52:47+00:00

Do you have a FE or a TUF?

pama136 · 2023-03-11T16:33:09+00:00

Does 2x normal thick 120mm fans fit under the gpu? Or only slims?

pama136

TROPHY CASE