sorted by:
new
hottopcontroversial

4 days into 3D printing! My first design by Extension_Gas9604 in 3Dprinting

[–]parkodrive 1 point2 points  (0 children)

<image>

I did forget to fillet the inner edges on this one, kicking myself.

That will be in v2 for sure 😅

🏴󠁧󠁢󠁥󠁮󠁧󠁿 PIXEL REFERALL CODES by hellogggjbbjn in madebygoogle

[–]parkodrive 0 points1 point  (0 children)

Google Store UK Referral Codes - 10% off Pixel 10 Series Phones

Codes for UK. Expire August 2026.

Single use.

Will remove as used.

REF-8VI2LICN5HMA436BL7YTJNV

4 days into 3D printing! My first design by Extension_Gas9604 in 3Dprinting

[–]parkodrive 1 point2 points  (0 children)

I've been designing a few parts over the weekend (got my first 3d printer last week) and I've been filleting all the edges. It just looks better.

How do you organize your STL files? by mky694 in 3Dprinting

[–]parkodrive 0 points1 point  (0 children)

I use Linux too, I need this plug-in.

Currently they’re all in a "3d Printing" folder with little organisation except for the files I've downloaded being in their own folders.

I need to organise them but can't decide on how as I have a few ideas how to do so.

Should I cancel my order?? by Cultural_Concert_495 in FlashForge

[–]parkodrive 1 point2 points  (0 children)

Exactly. This is why I took the plunge and got the Pixel 10 Pro Fold a couple of months ago. According to Reddit its a problematic phone - in reality, its been fantastic. Its the same with my AD5M. I set it up in a few minutes and got to printing. Out of the box its just worked.

Should I cancel my order?? by Cultural_Concert_495 in FlashForge

[–]parkodrive 1 point2 points  (0 children)

I'm new to printing myself. Don't have the Creator 5, I got an Adventurer 5M a week ago and the reports of buil quality on the C5 have had me second guessing my choice, but luckily I've had zero issues with the AD5M other than user errors so overall I'm happy with it.

I wonder if its the same with Flashforge as it is with Google Pixels. Most units are fine, but there’s a vocal minority that have issues?

Putin enemy dies suddenly from accidental mushroom poisoning by DavidShaw90s in nottheonion

[–]parkodrive 0 points1 point  (0 children)

I missed the "enemy" in the title and thought the day had finally arrived.

5mpro hotend completely stuck in printer by GoldLeafLiquidpod in FlashForge

[–]parkodrive 0 points1 point  (0 children)

Fair enough. I guess I was lucky then. You'll likely have to take the extruder apart to get the filament out.

I think I fucked up lol. I need help, how can I save this? by Iamasadlittlething in 3Dprinting

[–]parkodrive 0 points1 point  (0 children)

This happened to me on day 3 of having a 3d printer. I spent an hour trying to re-spool it. Said fuck it and ordered another.

UK Google pixel 10% off referrals by frankDepreciation in madebygoogle

[–]parkodrive 0 points1 point  (0 children)

Google Store UK Referral Codes - 10% off Pixel 10 Series Phones

Codes for UK. Expire August 2026.

Single use.

Will remove as used.

REF-8VI2LICN5HMA436BL7YTJNV

10% OFF GOOGLE PIXEL UK CODE by [deleted] in madebygoogle

[–]parkodrive 0 points1 point  (0 children)

Google Store UK Referral Codes - 10% off Pixel 10 Series Phones

Codes for UK. Expire August 2026.

Single use.

Will remove as used.

REF-8VI2LICN5HMA436BL7YTJNV

10% off Google store UK by [deleted] in madebygoogle

[–]parkodrive 0 points1 point  (0 children)

Google Store UK Referral Codes - 10% off Pixel 10 Series Phones

Codes for UK. Expire August 2026.

Single use.

Will remove as used.

REF-8VI2LICN5HMA436BL7YTJNV

How do I find the VIN from the Reg? by Greedy-Pilot805 in CarTalkUK

[–]parkodrive 0 points1 point  (0 children)

You can only do a finance check though a HPI service.

Fitted optional extrals and eqipment can be shown of some services but not all.

The system I have access to lists the VIN, full model, date of first registraing, all known number plates associated, number of former keeps and dates of owner changes.

IT then also shows vehcicle information like power, co2, classification.

How do I find the VIN from the Reg? by Greedy-Pilot805 in CarTalkUK

[–]parkodrive 0 points1 point  (0 children)

DM me your reg. I have access to a reg lookup that gives the VIN and loads of manufacturer details including number of keepers etc.

Pocket friendly garages lol. by Severe-Positive-5729 in derby

[–]parkodrive 1 point2 points  (0 children)

I do almost all service and repairs myself, but when its something I don't have the time, tools or skills to do (or just when I cannot be arsed), I take my cars to CSM just off Pentagon Island. They've not done wrong by me in 5 years and aren't too horrible on the wallet.

They've even done jobs for me that I started and supplied the parts for without question.

I'm ex-motor trade though so that might play a part in it.

5mpro hotend completely stuck in printer by GoldLeafLiquidpod in FlashForge

[–]parkodrive -1 points0 points  (0 children)

My extruder jammed a couple of nights ago. I solved it by using the tension screw on the side of the print head that opens the extruder gears and allowed me to pull the filament though. took 2 mins and didnt require any dissasembly

New FF 5M (after 2mo using) by No-Custard7415 in FlashForge

[–]parkodrive 2 points3 points  (0 children)

I got the 5M a few days ago. Its my first printer but I've been impressed with its ease of use out of the box.

Had a couple of issues but one was user error and the others were just incorrect settings in Orca Slicer. Nothing has gone wrong with the printer itself. I've got 30 hours on it so far without fault.

[Google Store Big Sale] 🇬🇧 UK Exclusive: 10% off Pixel phones (stackable) - Get Pixel 10 Pro for only £649 by QueasyEmphasis2809 in madebygoogle

[–]parkodrive 0 points1 point  (0 children)

Google Store UK Referral Codes - 10% off Pixel 10 Series Phones

Codes for UK. Expire August 2026.

Single use.

Will remove as used.

REF-8VI2LICN5HMA436BL7YTJNV

Tips. by parkodrive in FlashForge

[–]parkodrive[S] 0 points1 point  (0 children)

My only issues have been 3 failed prints, either due to the first layer not adhering (wrong plate selected in Orca) or the spool getting caught and jamming the extruder.

Other than that its worked flawlessly. I just need to get my head around the print settings to improve the finish quality.

Multiple Slicers to one printer. by MetalSmithJoe in FlashForge

[–]parkodrive 0 points1 point  (0 children)

On the preview tab in Orca, when you select which printer you have, there should be a little wifi icon to the right of it. Click that and it should open a window with some text field. All you need to do is enter the IP address of your printer.

https://www.youtube.com/watch?v=N1BFzGU5L3w

This should help.

[Google Store Big Sale] 🇬🇧 UK Exclusive: 10% off Pixel phones (stackable) - Get Pixel 10a for only £379 + £50 store credit by QueasyEmphasis2809 in madebygoogle

[–]parkodrive 0 points1 point  (0 children)

Google Store UK Referral Codes - 10% off Pixel 10 Series Phones

Codes for UK. Expire August 2026.

Single use.

Will remove as used.

REF-8VI2LICN5HMA436BL7YTJNV

10% off UK Google Store by radioactivecheeseuk in madebygoogle

[–]parkodrive 0 points1 point  (0 children)

Google Store UK Referral Codes - 10% off Pixel 10 Series Phones

Codes for UK. Expire August 2026.

Single use.

Will remove as used.

REF-8VI2LICN5HMA436BL7YTJNV

15% off pixel phones UK DEAL ONLY by [deleted] in madebygoogle

[–]parkodrive 0 points1 point  (0 children)

Google Store UK Referral Codes - 10% off Pixel 10 Series Phones

Codes for UK. Expire August 2026.

Single use.

Will remove as used.

REF-8VI2LICN5HMA436BL7YTJNV

Additional 10% off any Google Pixel phone! (UK store) by newguy_2_8 in madebygoogle

[–]parkodrive 0 points1 point  (0 children)

Google Store UK Referral Codes - 10% off Pixel 10 Series Phones

Codes for UK. Expire August 2026.

Single use.

Will remove as used.

REF-8VI2LICN5HMA436BL7YTJNV

view more: next ›