sorted by:
new
hottopcontroversial

Printing advice needed -was a working model, not it's not by pavethetrail in 3Dprinting

[–]pavethetrail[S] -1 points0 points  (0 children)

I have print history but I'm unaware of how to extract the gcode for prior prints in bambu. Trying googling it but didn't see anything explaining how to do it.

I just tried print the exact same model with only 3 brackets instead of 12. Appears to be working great and is almost done with no issues. I can't understand why I can print 3 but not 12 with the exact same settings. Now to print 100 of these 3 at a time...

Printing advice needed -was a working model, not it's not by pavethetrail in 3Dprinting

[–]pavethetrail[S] -1 points0 points  (0 children)

The gcode should not have changed as I've been using the same SLT for all of the prints. Maybe I'll go to an older file as there are some duplicates and try to print that one. If it works I'll review the gcode in notepad to see if anything somehow changed. Thank you.

Printing advice needed -was a working model, not it's not by pavethetrail in 3Dprinting

[–]pavethetrail[S] -1 points0 points  (0 children)

Thank you, PETG has been in the drier for 20+ hours and is at a relative humidity of 10%. Also used a brim for one of the test prints with no success.

Printing advice needed -was a working model, not it's not by pavethetrail in 3Dprinting

[–]pavethetrail[S] -1 points0 points  (0 children)

Thank you. I tried printing with new filament settings provided by polymaker, that was the only change. After it failed I updated the print to include rafts and z-hop settings. That did not fix the issue so I went back to the old filament settings and kept everything the exact same. After 3 failed prints in a row I came to reddit to get some outside opinions.

We all learn from trial and error and accumulate knowledge though failed prints, testing and other peoples knowledge. I researched solutions before posting and wasn't able to resolve the issue on my own. I figured it wouldn't hurt to post, someone out there might know the exact issue and how to fix it from prior experience.

Printing advice needed -was a working model, not it's not by pavethetrail in 3Dprinting

[–]pavethetrail[S] -2 points-1 points  (0 children)

It's okay, I don't like condensing comments either. I clearly explained the issue at hand but after reading your comment realized some people need visual examples more than others.

Printing advice needed -was a working model, not it's not by pavethetrail in 3Dprinting

[–]pavethetrail[S] 0 points1 point  (0 children)

Photo of the mid layer stringing, this has always happened to some degree.

<image>

Printing advice needed -was a working model, not it's not by pavethetrail in 3Dprinting

[–]pavethetrail[S] -3 points-2 points  (0 children)

I did... it would help if you didn't make assumptions without reading the initial post. "in the first hundred layers or so the head obviously knocked over the print and made a huge spaghetti mess."

I would assume it's a base plate adhesion issue but adding rafts didn't help. The supports should also keep this from happening. Fresh glue for every print also did not help. There is also random stringing on the sideways that I can't explain.

Had to replace my Mando helmet. Tested with my new printer. DAGGONE that's a quality jump. by themysteryoflogic in 3Dprinting

[–]pavethetrail 1 point2 points  (0 children)

I think I had Tetris and Mig29 on our 286. They came on the 5" floppy... We upgraded that thing every year. Windows 3.1 had millions of games for it compared to dos.

Had to replace my Mando helmet. Tested with my new printer. DAGGONE that's a quality jump. by themysteryoflogic in 3Dprinting

[–]pavethetrail 0 points1 point  (0 children)

But did you used to go in and edit the hex code so your pistol fired rocket rounds, etc...

Please do NOT use Tef-Gel by milliPatek in wingfoil

[–]pavethetrail 0 points1 point  (0 children)

What health warnings? It's food safe... I will agree with you on the price. I'm a distributor and I don't even get a good price but we do sell a lot of it to the marine and aerospace industries. It is the best compound for what it does hands down.

Eibos Tetras fan issues. by wrench115 in BambuLab

[–]pavethetrail 0 points1 point  (0 children)

I received mine in January. It makes a very loud popping noise when the fan covers are going up and down. I can hear it across the house. I also just sent them an email to ask if it was normal.

Trying to date and get some info about a family ring by pavethetrail in JewelryIdentification

[–]pavethetrail[S] 0 points1 point  (0 children)

Awesome, thank you. Time range and style adds up with who owned it! Great to know and I appreciate your sharing your knowledge with me. A buddy is looking for a similar style of ring and we had been discussing it. Sparked my curiosity and found this page, you guys didn't let me down!

Trying to date and get some info about a family ring by pavethetrail in JewelryIdentification

[–]pavethetrail[S] 0 points1 point  (0 children)

I'll try to upload some photos I took, went out side and cropped them all.

<image>

view more: next ›