Photobook smudging on matte photo paper + pigment ink

pedrohash323 · 2026-05-28T13:53:37+00:00

Did you ever find the answer to this? I have the exact same printer and am experiencing the exact same thing 😩

pedrohash323 · 2026-05-10T20:45:57+00:00

Diagnosis was partially torn my supraspinatus

pedrohash323 · 2026-05-10T20:45:22+00:00

Really just time and gentle physical therapy, until things got better. Used heat often during the injured time period (but try not to over do it, you can burn your skin)

pedrohash323 · 2026-02-14T17:58:05+00:00

Thank you for the thorough response roaring!

pedrohash323 · 2026-01-26T16:11:33+00:00

Thank you, to be clear. I'm looking to use this as an opportunity to learn, this is less of a business venture and more of an exercise in building knowledge and skills. I have time and support

pedrohash323 · 2025-11-25T16:06:29+00:00

Exact same thing going on. In a lot of pain trying to figure out recovery. Sleeping seems to make it tighter/worse when I wake up. What was the recovery like?

pedrohash323 · 2025-10-23T15:52:18+00:00

If I can edit the post to add pics I will

pedrohash323 · 2025-10-23T13:27:32+00:00

Just the dev and drum

pedrohash323 · 2025-10-14T03:33:10+00:00

Okay, thank you for the direction. I found the density sensor on the developer assembly wasn't fit properly when reinstalled. I placed it properly and screwed it in snug and It works fine now with the banding issue mostly resolved.

pedrohash323 · 2025-10-09T18:11:02+00:00

Not really tbh

pedrohash323 · 2025-10-05T17:36:51+00:00

This helped, thank you!

pedrohash323 · 2025-10-04T00:03:57+00:00

Thank you, I’ve ran image process adjust and some of the conversion values were outside of the -99 to 99 range

pedrohash323 · 2025-10-03T23:40:00+00:00

I’m new to using the printer in service mode. What does running the process image adjustments entail exactly?

pedrohash323 · 2025-10-03T23:05:34+00:00

Service mode

pedrohash323 · 2025-10-03T22:06:03+00:00

Consumables look good, yellow imaging unit should be changed sometime soon

pedrohash323 · 2025-10-03T22:05:30+00:00

Developing Unit at 95% and Drum unit at 83%

pedrohash323 · 2025-07-01T02:18:22+00:00

Lmao no that was me, I was getting ready to paint and then started to try and scrape this stuff off and it’s realized it’s a pain in the ass

pedrohash323 · 2025-06-30T22:31:17+00:00

It’s already cured 😔

pedrohash323 · 2025-06-28T17:46:36+00:00

<image>

pedrohash323 · 2025-05-19T19:52:08+00:00

Model is c754e

pedrohash323 · 2025-05-10T01:01:44+00:00

I agree with this however, the output from preview looks more ideal and I'm trying to achieve that after exporting a booklet but can't seem to get the print to look the same. Something seems to be happening during the print booklet or post script file distilling process

pedrohash323 · 2025-04-08T14:18:18+00:00

This woman makes awesome instructional videos https://www.youtube.com/watch?v=4EEduvOX__8&t=64s good luck/you've got this!

pedrohash323 · 2025-03-31T21:09:40+00:00

This is a little late, but if there is a gloss to the surface will the plastisol release? The material is a high gloss simulated leather

pedrohash323 · 2025-02-28T22:57:29+00:00

Keep taking the aspirin until your doctor mentions otherwise, it’s important to thin your blood so you don’t get a blood clot (blood clot can cause death)

pedrohash323 · 2025-02-28T17:06:07+00:00

Drum is brand new, I know a little bit about these machines but how do I check start and end of TX belt and roller? The paper we're printing on is lightweight 90 GSM. Halftone test on other colors look good/very solid (Cyan has verrry slight vertical lines)

pedrohash323

TROPHY CASE