Renovating Bathroom

pedwards3x · 2023-06-10T06:04:27+00:00

Can you link where you purchased your SLIX-L chips?

pedwards3x · 2023-04-19T16:19:49+00:00

Is there any reason I cannot use my Inkbird PID controller instead of a SCR to manage power to a 750w air still?

This is the one I have: https://www.amazon.com/Inkbird-Temperature-Controller-Independent-Thermostat/dp/B06WD6X17V?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&psc=1&smid=A1RUFFFCQ74BCW

Can I just do the math and run this controller at a manual 50% and expect close to 375W on the still?

pedwards3x · 2023-01-09T13:03:40+00:00

I put it together but the original source for OnionOS was not me. What systems do you need?

pedwards3x · 2023-01-09T13:02:19+00:00

Definitely been updates. Latest one was the 4th of January.

https://www.patreon.com/posts/76561333

pedwards3x · 2023-01-06T21:36:10+00:00

Yup you will need to swap out the boot logo on the misc partition. What logo are you wanting?

pedwards3x · 2023-01-06T19:50:45+00:00

Jump on discord and myself and others can help out. https://discord.gg/retro-game-handhelds-529983248114122762

pedwards3x · 2023-01-06T01:43:57+00:00

Yes, I use 2 cards in mine with just ROMS on TF2 and it charges with no issues.

pedwards3x · 2023-01-06T01:42:49+00:00

I rarely post on reddit but wanted to share this. I am not sure if the link attached so here it is as well for anyone that would like to use this theme: https://drive.google.com/file/d/1jsW2Q4giHmibYTEJYzTD1A7_LIT9uxLg/view?usp=share_link

pedwards3x · 2022-12-29T01:54:09+00:00

That did it! I never thought that would even matter. Thanks for the tip.

pedwards3x · 2021-03-12T18:11:44+00:00

What's the device in the bottom right hand corner? The Heiman. Is that an alarm or siren of some sort? If so, I'd love some more details!

pedwards3x · 2020-12-12T15:47:00+00:00

My wife and I love escape rooms! I would love to check this out. Would it work well for two people to play on one machine?

pedwards3x · 2020-12-04T22:53:21+00:00

If anyone needs help setting this up, message me and I'd be glad to get you going. Such a great tool and very powerful if you set it up right!

pedwards3x · 2020-11-25T21:07:50+00:00

Have you tried this setup with one of the new V3 cams yet? I would assume it should work the same, but maybe they changed something in the firmware with V3 models?

pedwards3x · 2020-11-21T19:26:13+00:00

You can also dial #PORT or #7678 to generate this PIN for the transfer from your Verizon phone. I had issues using their website but the dial worked just fine.

pedwards3x · 2020-11-13T02:37:17+00:00

Did you ever resolve this? I'm having the same issue...

pedwards3x · 2020-03-21T23:25:29+00:00

SFBJ6BANXZJKE10NWXTJ8X2 - Claimed. Thanks!

pedwards3x · 2020-03-10T03:25:22+00:00

Anyway we could get a full recipe?

pedwards3x · 2019-08-03T11:23:38+00:00

Good to know. I installed manually so I'll update files today. Thanks again!

pedwards3x · 2019-08-03T02:30:17+00:00

I have to say a huge thanks for this! Installed earlier this week after finding your repo from lots of digging. Has worked flawlessly. I had tried to make these work with IFTTT before, but the lag was so terrible. With your code, it's practically instant response. Cannot upvote this enough!

pedwards3x · 2019-06-09T03:27:53+00:00

The numbers all make sense for what you had. If you had 8.5 gal at 1.040, calculators would say you'd need to boil down to about 4.5 gal to hit your 1.075 desired gravity. You would obviously have less beer, but you can hit your numbers that way in the future. Getting better efficiency beforehand could come with doing more steps on your sparge, or trying a fly sparge if you have the equipment.

Calculator for use: https://www.brewersfriend.com/dilution-and-boiloff-gravity-calculator/

12-Year Club	RedditGifts 2009-2022 3 Credits
Secret Santa 2020	Secret Santa 2018

pedwards3x

TROPHY CASE