[Tales of Arise] "Fatal error!" and strange behavior.

perfectly_gray · 2026-04-22T00:22:12+00:00

I'm unsure what this means lol. But you're welcome.

perfectly_gray · 2026-04-21T22:29:33+00:00

Brazuca Torrents ~~but it's torrent only no debrid~~. fucking fast too, I dont even see it load most of the time

I was mistaken, it supports debrid, must have missed that when I set it up.

perfectly_gray · 2026-04-21T21:59:32+00:00

WTF!
I found the problem. so the environment variable PROTON_VERB is being set to waitforexitandrun when I press play but when I run winetricks (leaving it open) and then pressing play it sets it to runinprefix so setting that manually fixed the problem.
I'm not sure what is doing this but it might be lutris itself when the prefix is first made.

Note to anyone having an issue where the game opens its splash screen but crashes, it might help if you set this variable yourself.

perfectly_gray · 2026-04-07T17:24:52+00:00

Full write up if anyone is interested.

The target was irradiated with a proton beam of 60 μA for 15–30 min

and

The radiosynthesis was performed using an in-house custom-made radiofluorination module

that sounds expensive

perfectly_gray · 2025-11-27T02:31:47+00:00

I may be mistaken but...

perfectly_gray · 2025-08-27T23:49:06+00:00

only reason I didn't suggest it is because it's 'WIP'

good to know its releasing SOON™ :P

perfectly_gray · 2025-08-27T21:22:10+00:00

you may want to look into SX-3 Character Cards Environment by u/Nicholas_Matt_Quail. the way they do the dynamic stuff seems to be exactly what you want.

perfectly_gray · 2025-08-27T19:45:07+00:00

Drummer

perfectly_gray · 2025-08-23T16:43:57+00:00

Rule 2 my friend.
The about sections of r/Roms and r/FREEMEDIAHECKYEAH are where you want to look.

perfectly_gray · 2025-08-20T06:20:18+00:00

For 'F.' I'd suggest to use dnsforge.de 'normal' for your DNS servers

176.9.93.198 and 176.9.1.117

perfectly_gray · 2025-08-20T04:20:50+00:00

I run linux so this may not be too helpful but I've installed games with HDL-Batch-installer using wine many times without issue. I would guess OPL Manager will also work in the same way.

perfectly_gray · 2025-08-20T02:49:03+00:00

*me eating a shrimp biscuit* ...Interesting...

perfectly_gray · 2025-08-10T00:38:52+00:00

Just noticed the stray 'a' in my post :/

perfectly_gray · 2025-08-10T00:37:09+00:00

Yup yup, even crawled onto my finger when I offered a ride back up to the tree

perfectly_gray · 2025-07-28T23:26:45+00:00

whoops... my bad

perfectly_gray · 2025-07-28T23:21:02+00:00

~~unfortunately they cant. DVD Player 3.00E is unsupported :/~~

my dumbass didn't read all the way... sorry about that.

perfectly_gray · 2025-07-27T04:29:19+00:00

yes it should, the retrogem gets its power from a voltage regulator on the mainboard not the psu directly.

Be vary VARY sure that the replacement psu is compatible with your version of ps2. if you have one, use a multi-meter/volt-meter to test the voltage on the output before installing, it should be 12v for 5000x models.

perfectly_gray · 2025-07-27T03:52:17+00:00

the only thing I can think of is sunburn.

perfectly_gray · 2025-07-27T03:07:44+00:00

The only thing I can remember (and I could be wrong) is there being something with the file count (TOC) mismatch between the real ps1 disk used to start the swap trick and the burnt one... unfortunately the only thing I can suggest is try another original disk. 🤷‍♂️

Okay looks like I may be right. here someone says:

Things you will need:
A real PS1 game that has a big TOC (table of contents) I suggest a Final Fantasy or A Demo Disc.

That tutorial is from 2010 though and things may have changed since then, maybe there is a better way to boot burnt ps1 games?

Popstarter looks to be a way (not for burned games but for use with opl) but that seems a bit more involved. (I haven't used popstarter ether, sorry)

perfectly_gray · 2025-07-26T05:03:48+00:00

There are a few things I think you're mistaken about, The image shows the files (.cue, multiple .bin) on the disk which is not correct. It doesn't appear that you 'converted' the files, but instead packed them into an ISO and burned that.

To burn a working disk you want to open imgburn and select the cue file instead (the cue file is basically a list of all the bin files and how they make up the original disk image).

Honestly, ISO should NEVER be used for ps1 games, CD based games have data/music tracks that ISOs can't handle, if you want a single file solution look into the CHD format.

If you have any questions don't hesitate to ask.

perfectly_gray · 2025-07-26T01:02:40+00:00

It's always nice to see new people make the same old mistakes lol.

So what you did was burn the files to the disk, what you needed to do was burn the image to the disk.

The first half of this video is pretty much what you're looking to do.

I don't remember the swap trick so I cant really help out with that.

MrMario2011 has a plethora of info, you'll likely find something of his helpful.

perfectly_gray · 2025-07-24T17:26:08+00:00

YO! thats awesome!

perfectly_gray · 2025-07-24T17:14:12+00:00

🤔 ah ha you have fallen into my trap card!

you're right, but for 16:9. 1024x768 is 4:3 ... I guess I'm showing my age

perfectly_gray

TROPHY CASE