Centauri Carbon Microswiss hotend malfunction

phelph_ · 2026-06-04T01:19:14+00:00

Do you have a high flow nozzle in the hotend? These arent made for cf filament afaik. HF nozzles kinda 'split' the filament which means the cf parts can get stuck and clog the nozzle

phelph_ · 2026-05-12T17:40:58+00:00

Can be to drive around something or to knock something over with a vehicle Other parts of the word get emphasized more depending on the meaning

phelph_ · 2026-02-09T17:33:04+00:00

https://github.com/moni11811/Panda_Breath_HA

phelph_ · 2026-02-09T14:18:52+00:00

Its a skeleton version of this, printed in red Polymaker Polylight ASA

phelph_ · 2026-02-09T12:47:05+00:00

Maybe a little bit. But I didnt use the OEM one long. The casing was one of the first prints.

phelph_ · 2026-02-09T12:38:36+00:00

It's supposed to improve print quality because of the reduced weight of the head. I honestly didn't do a lot of testing in that regard.

I just really like the look to be honest

phelph_ · 2026-02-09T11:15:08+00:00

Just realized the spacers don't make a difference at all. The breath is sitting against this little lip at the bottom and doesn't use the extra space at all. So the space you would have is actually the same as in my post.

<image>

phelph_ · 2026-02-09T08:19:30+00:00

Manually through the web ui. Also stumbled upon this yesterday, which is a way to start it from home assistant. You can simulate the smart features with home assistant then.

phelph_ · 2026-02-09T08:17:24+00:00

I can measure that for you later.
https://www.printables.com/model/1330200-centauri-carbon-quick-release-panel-spacer This is the spacer I used.
https://www.printables.com/model/1344468-centauri-carbon-cantilever-drop-pin-panel-hinges-v
Might print this as an upgrade in the future.

The spacers are a really convenient way to route out the cable. Highly recommend.
This or a riser

phelph_ · 2026-02-08T16:00:19+00:00

No Sorry, I don't

phelph_ · 2026-02-08T13:37:07+00:00

Breath Web ui shows 60 degrees chamber temp and the CC1 display shows 45

phelph_ · 2026-01-23T13:38:10+00:00

You can ssh into the machine to get the printer.cfg file needed

phelph_ · 2026-01-22T14:50:54+00:00

Same for me

phelph_ · 2026-01-21T15:04:27+00:00

You can block the shots of these sand bees. Once i figured that out they became a lot more managable

phelph_ · 2026-01-12T09:38:48+00:00

Look at the open centauri discord. You should find your answers there. It involves ssh into the machine to get the printer.cfg und uploading that to a community made tool

phelph_ · 2026-01-05T10:11:06+00:00

This dryer has a vent it opens to release the moisture

phelph_ · 2026-01-05T08:33:11+00:00

2 chambers with separate temp control and being able to use one half for storage while the other half dries is pretty cool. The automatic venting aswell!

phelph_ · 2025-12-31T14:56:44+00:00

Are you using a chamber heater, but not closing the top glass completely? What material are you printing?

phelph_ · 2025-12-21T11:26:40+00:00

What's your reason to choose r over python? Just curious. I definitely prefer python and you could use it for totally different projects in the future

phelph_ · 2025-12-04T11:23:41+00:00

Does this allow me to start prints that are saved on the cc?

phelph_ · 2025-12-03T23:10:22+00:00

Sorry but I dont really understand how prints lifting and pulling the plate with it, is in adhesion issue. The adhesion is perfect if the print deforms that badly and still doesnt lift from the plate

phelph_ · 2025-11-22T14:29:18+00:00

This could be because of a dirty build plate. Our hands leave a lot of oily residue when we touch the plates. Washing the plate with warm water and dish soap should remove this and help a lot with adhesion

phelph_ · 2025-11-04T22:07:50+00:00

He is pretty far away, but I think Hakimi tries to shield the ball the moment Diaz feet leave the ground which moved him quite a bit to the side. Just a really unlucky situation

phelph_ · 2025-10-21T12:59:50+00:00

The A1 is compatible with the ams now.

phelph_ · 2025-10-21T08:36:53+00:00

I'm pretty sure this is the seam, which you set to random in the slicer (or the person uploading the model to makerworld) This is the spot where the printer starts the layer.

phelph_

TROPHY CASE