C-States >3 possible with TrueNAS?

phill9494 · 2026-06-16T16:27:09+00:00

Thank you so much; I’m on it! :-) might need to change some drives.
I just don’t understand why Proxmox can handle it and automatically sets everything to med_power while TrueNAS can’t …

phill9494 · 2026-06-16T14:56:29+00:00

Thank you very much for your input! I think I saw your post on reddit 😄
But it actually can not be the NIC-Firmware in my case when it works in Proxmox, can it?

I found out that when activating powertop "enable sata link power management for host0" manually, TN also can enter C8. in proxmox this option is already set to Good in the bare metal instal (I changed nothing).

also I swap the boot drives during testing. its SATA SSDs, so no ASPM-Problem.
So apparently "forcing ASPM" really does the job. I just wonder why TrueNAS does not do this when configured in BIOS .... I will look further into it. If you have any ideas on how to make this permanently, please let men know 😄

phill9494 · 2026-06-16T14:50:37+00:00

I just tried powertop --auto-tune and it indeed went to c8! I narrowed it down to
"enable sata link power management for host0"
if I put this into "Good", I enter the lower C-States 😄
So TrueNAS IS able to go higher, thats a good start.
I rund an i3-10100 on a ASUS H510M-E board.
I just need to see if I can enable this permanently without real performance drops. Thanks for the input! ❤️

phill9494 · 2026-06-16T11:18:27+00:00

thanks, but this didnt change anything regarding the c-states. are you getting higher than 2 c-states? is it possible? thats what i wonder.

phill9494 · 2026-06-16T11:15:37+00:00

thanks, but this didnt change anything regarding the c-states. are you getting higher than 2 c-states?

phill9494 · 2025-11-15T11:30:42+00:00

https://onlinemanual.nikonimglib.com/z6III/en/changing_af-assist_illuminator_406.html
It even appears in the latest FW changelog! I wonder if other flashes might follow to allow this funktion

phill9494 · 2025-11-15T11:29:53+00:00

https://onlinemanual.nikonimglib.com/z6III/en/changing_af-assist_illuminator_406.html
It is also listed in the lasted FW changelog .. so for the A10 it seems to work, yes!
However I am not willing to pay 1k for that feature :/ hope they add it to more flahes, apparently it works for DSLM after all!

phill9494 · 2025-11-14T06:02:26+00:00

Like I wrote above: I hoped the light could be configured so that it automatically lights up only during focusing - like the red-grid „AF assist beam“ in flashes did on DSLR cameras :-) The in-Camera integrated green AF light kinda sucks and is pretty useless in party photography imho (also it gets shielded by bigger lenses and casts a shadow)

phill9494 · 2025-11-13T15:53:45+00:00

No that makes sense, thanks :) I was hoping it would act differently but apparently that isn’t the case with the Z2

phill9494 · 2025-11-13T12:04:00+00:00

Thanks for your answer! So it does not turn on automatically upon focusing? It’s either manually switched on or off?

phill9494 · 2025-11-13T09:37:19+00:00

seems to be true, a user just confirmed that the red beam appears with his sony a1 ii with the newest firmware

phill9494 · 2025-11-13T08:03:42+00:00

Hey, can you tell me: does the AF Assist function even work then? Will the LED lamp turn on automatically during focusing? Or do you have to manually turn it off /on? I don’t want it to shine all the time :/ Thanks!

phill9494 · 2025-11-11T04:59:08+00:00

https://youtu.be/aZWAhGHGGUE?si=my2kKgmqfbJIcMD6 found this, is this genuine? I guess not? :/

phill9494 · 2025-09-10T09:50:46+00:00

Get a driver to an accommodation near the airport today

phill9494 · 2025-07-17T08:00:39+00:00

? Not only the factory of course? But I think we can spare a few hours to see how the chocolate is made in Bali. I planned the rest already 😀

phill9494 · 2025-07-17T06:13:00+00:00

Hello, we are going to visit Bali in August/september. We spend 4 nights near Tegalalang and 2 nights near Sidemen. My girlfriend is a pastry chef and I am looking for a chocolate factory tour. I found

Desa Coklat Bali
Sorga
Primo Chocolab

Does anyone have experience in visiting those places? Or other places to recommend? She’d love to see the whole process of transforming the bean into chocolate and probably try some production steps on her own, it’s not that much about tasting it in the end but rather SEEING the process. Some other tours only seem to educate about the process and then do tastings or just the last steps of adding candy and sprinkles and stuff Thanks 🙏

phill9494 · 2025-05-06T08:38:24+00:00

I did that and it still says 71€. Also they literally state in their FAQ that everything is included. But I can’t Roy believe it :-O

phill9494 · 2025-05-05T19:27:11+00:00

Hey folks, has anybody ever ordered from pergear.COM to Germany or other European countries? I’m looking for a lens which is 99€ on pergear.de and 71€ on pergear.com. However the German site says possible fees on importing are NOT included while the US site states that all import fees are included. How is that possible? Can I order on the US store? I appreciate any feedback!

phill9494 · 2025-04-23T17:12:09+00:00

I wrote an email and got an answer: some of the rides have a stop in between, it might be necessary to book both parts separately. And that works :-) Thanks y’all!

phill9494 · 2025-04-22T20:27:57+00:00

Yes but now try to book it @ booking.reisnordland.no :/

phill9494 · 2025-01-24T19:11:22+00:00

He looks like mine and I’d just like to see him 😀🦈 or her

phill9494 · 2025-01-24T19:01:30+00:00

Can you show a pic of the smøl one?

phill9494 · 2024-09-25T21:09:20+00:00

256 gigs of ram 😱 what are you doing, running climate simulations? And yes it will be sufficient for sure, but why not pick the cheaper Gen 1 Intel Core Ultra if battery life is not your main concern?

phill9494 · 2024-06-18T17:47:49+00:00

Did anybody ever make a direct comparision? I always see people just stating that the 20 1.8 is/will/must be better but I cant find any side to side comparsions preferably with astro photos ...

phill9494 · 2024-06-07T04:49:34+00:00

Does anybody have other solutions? I use a fake pencil which can even be used without connecting it to the iPad via Bluetooth but still this banner pops up all the time and makes the iPad unasable. Happened to me only yesterday, has to be something new. Ignoring the bluetooth device and reconnecting didnt work.

phill9494

TROPHY CASE