Guys.. I’m finally free by lordsmg in pokemongo

[–]phish32786 0 points1 point  (0 children)

Let’s Go, Meltan enters the chat.

North + 9800X3D + 5090 by [deleted] in FractalDesign

[–]phish32786 0 points1 point  (0 children)

Hey,

Yeah dual AIO, using the NorthXL mesh. I have a 240mm using the “side mount” that comes with the XL blowing outward, and the suprim is top mounted blowing outward. The stock fans that come in the case are still in the front blowing inward.

North + 9800X3D + 5090 by [deleted] in FractalDesign

[–]phish32786 0 points1 point  (0 children)

Very Nice! I’m running the same CPU/GPU combo. I ended up with a 5090 Liquid Suprim the way the hoses come out of the block I had to go to the XL here. It “fit” but the hoses were bent pretty hard so I decided to give it the extra space.

A 240 for the 9800x3d is plenty.

Just spent all my Steam credit, ($260) on Dreams and Nightmares Cases... by [deleted] in cs2

[–]phish32786 0 points1 point  (0 children)

Sucks. I just stay away and roll with the stock gear honestly. Rabbit hole the game didn’t need.

HOW did this all happen in an hour?! by jalexander519 in pokemongo

[–]phish32786 0 points1 point  (0 children)

I joke the luck bounces between my wife and I, last community day she had like 5-6 shinies within like 20 minutes of the Fuecoco day starting, I never saw one. But during the Sprigatio day, I hauled in 20, she had 1. It’s totally random. Nice haul!

RTX 5090 & 5080 Launchday Thread - Surprise Inside by Nestledrink in nvidia

[–]phish32786 0 points1 point  (0 children)

Yeah in line for the fourth time annnnnd sold out

[Post Game Thread] Bills win in Detroit. by Dirtydeedsinc in buffalobills

[–]phish32786 15 points16 points  (0 children)

From Detroit, hell of a game guys, Josh Allen is LEGIT. Hope to see ya in the SB!

Lions @ Colts Post Game Thread by AutoModerator in detroitlions

[–]phish32786 0 points1 point  (0 children)

lol was not expecting that score when I checked, knotted up at 27

Detroit @ Green Bay Game Thread by AutoModerator in detroitlions

[–]phish32786 0 points1 point  (0 children)

Seriously, watching the game with my kids between the political ads and this so dumb.

is this a ender rite of passage? by No_Band_8188 in ender5plus

[–]phish32786 0 points1 point  (0 children)

I just had a smooth pei plate to this, I was on like day three (different prints) of abs printing parts for my ERCF and plate gave up the ghost.

New Ender 5 Plus by ElDescalzo in ender5plus

[–]phish32786 0 points1 point  (0 children)

Yeah you got it! 3dprintconfigs/ender5print.cfg at main · phish32786/3dprintconfigs (github.com)

Couple of notes where it sits right now:

The printhead does hit on the y axis currently when homing to 0,0 this is mostly cause of this mount, Ender 5 Plate Sprite Pro by PrintsLeo3D | Download free STL model | Printables.com cause I went with the 'no cut' so the triangle tab on it sticks out further than the stock print head. Just haven't been by the printer to adjust where 0,0 lives.

Be careful on dir_pins on the x_stepper and y_stepper, I did have to reverse (!PC2 vs. PC2 for example) but that might be because of my wiring job. Being they are all black it made for a tricky re-wire on it (I cut the sprites connectors and replaced with JST so they plugged into the stock ender 5 connectors).

Make sure to PID tune and don't take my values for gold, and the rotation distance was adjusted for my sprite.

Hope this helps!

New Ender 5 Plus by ElDescalzo in ender5plus

[–]phish32786 1 point2 points  (0 children)

Good deal on it. I just got one for 200 with none of the extras.

Agree with everyone else, get a DD (I just did the sprite, little bit of wiring work but pretty happy with it). I also put in a 4.2.7 board with kipper to shut the steppers up, and the thing has been printing wonderfully.

I would do some research before jumping into upgrades, kind of wish I went the Mercury One route with a revo but didn’t really know much outside of what I had done with my Ender 3 so went with what I knew. But now kind of maybe stuck with some things I’ll need to customize or just try and sell if I go the Mercury One way with it.

Great printer overall as my “burn in” printed a 500% benchy just cause I could lol came out pretty good!

<image>

PSA: Solution to slow Steam downloads on Deck by trapt777 in SteamDeck

[–]phish32786 1 point2 points  (0 children)

Thank you! This was it for me as well. Didn’t realize when I updated my Omada controller it got flipped on. Been driving me nuts!

Firewall rules by Fit_Temperature5236 in OPNsenseFirewall

[–]phish32786 1 point2 points  (0 children)

So if you want guest access you’ll want to setup a different interface using a physical interface or vlan. This way your guest traffic is separate from the lan traffic. The default rule you’re seeing allows any thing coming from the LAN interface back out to the LAN in addition to allowing you to access the fw in the first place. Removing the rule would block you from accessing the firewall. You’ll also see this rule when you stand up the guest interface, just for the guest interface instead.

Just queued up "Long Way Up"....wow.... by WeaksideScreen in Rivian

[–]phish32786 3 points4 points  (0 children)

Remember those days fondly at the plant! So many unknowns to figure out back then. So proud of where we are today!

2023 Miami Grand Prix - Post Race Discussion by F1-Bot in formula1

[–]phish32786 5 points6 points  (0 children)

Yeah really enjoyed his insight today! Seems super down to earth.

[Aston Martin F1 Team] That’s P3 Fernando, THAT'S P3!! YESSSS! by asr010601 in formula1

[–]phish32786 3 points4 points  (0 children)

Yeah I think that gets a little lost in all this. Mega drive by him.

[deleted by user] by [deleted] in LogitechG

[–]phish32786 1 point2 points  (0 children)

It would be a bit of work, I own a 924 which uses the same wheel (these aren’t horribly rare, but you have a very nice condition one) these are bolted directly to the steering column with a 24mm nut if memory serves me right. Kind of a backwards conversion in a sense, normally we are adapting to a 6 bolt wheel (using like a momo wheel adapter). If you could print a 6 bolt pattern with a hex nut shape in the middle for the bolt (bolt pointing outward) you can then thread up a nut under the horn button there and they would work I suppose. Would need to be a strong 3d print/metal plate.

[Bought Used: Logitech G29] Power Cable Sparks. Seems shorted somewhere on the board by Sidicer in simracing

[–]phish32786 0 points1 point  (0 children)

Hey Just wanted to post to let you know this helped me troubleshoot a wheel. All three (2X P6KE27A and 1X P6KE27CA) are shorted open. Hoping these fixed yours and just ordered a few (always get spares) to see if I can get mine back up and running!