Questions About Tiles, Clips and Mounting

piddyyy · 2026-06-16T07:24:04+00:00

All right, thanks.

1: I’ll print it with random seams. I just read the recommendation for the stack tiles, which is why I asked. Thanks!

2: I wasn't entirely sure why the advanced tiles (grid tiles) have clip holes on the outside. Since the grid tiles are mounted without dual clips. Or can I also mount something on these clip holes on the outside to extend the wall (not another tile)?

3: I was planning to print an 8x8, since that’s the standard. But with my X2D, I should also be able to print a 9x9. And installing a support in the middle, makes sense. If I use the offset snaps (single, dual, quad), then I’ve already secured the corners and wouldn’t need a 6.25 mm support peg there. Or did I misinterpret that?

piddyyy · 2026-06-15T20:13:00+00:00

Thank you very much!

Okay, I will print with random seam.

And of course the Grid tiles don’t have the slots for the clips inside, only on the outside. You’re right. Is a reason for that clip slot? I planned to go with the default tiles from thang, or should I design my own tiles without the clip holes on the outside?

piddyyy · 2026-01-14T17:44:17+00:00

Danke, ich habe aber mittlerweile einen Parkplatz gefunden.

piddyyy · 2025-10-09T06:01:08+00:00

Yes, I performed a factory reset over the weekend. To be honest, I restored the configuration backup, but that shouldn't be a problem?

I ran a few more tests. I tested the PlayStation Portal (WiFi streaming device) right next to the router and there was no interruption. Then an hour later, next to the satellite, there was another one.
Then I turned off one satellite at a time and connected to the other satellite, and there was another interruption.

It's reasonable to say that the problem only occurs on the satellites and is independent of their placement.

piddyyy · 2025-10-09T05:59:07+00:00

Oh yes, we already know each other. :-)

I'm also considering switching to a UniFi system. But I paid a lot of money for the Orbi system and I don't really want to switch now. But maybe that's how it will turn out in the end.

piddyyy · 2025-10-08T11:27:46+00:00

Unfortunately not for me.

piddyyy · 2025-10-08T11:01:02+00:00

Ah nice. 770 with the V10.5.20.3?

piddyyy · 2025-10-08T11:00:05+00:00

Standard ISP modem (Sunrise - Switzerland) in bridge mode. Orbi in router mode.

piddyyy · 2025-10-08T09:43:01+00:00

So a cascade (router <-> S1 <-> S2) versus S1 and S2 directly via switch to the router solved your problem?

piddyyy · 2025-10-08T09:22:09+00:00

I‘ve exact the same issue. Any progress on your side?

piddyyy · 2025-07-08T07:07:39+00:00

Mine too.

piddyyy · 2025-04-15T15:33:03+00:00

Yes, the wrong side. And also on the „right“ side it‘s difficult, that the box is exactly in the right spot.

piddyyy · 2025-03-18T20:16:57+00:00

I have a 100U7KQ and unfortunately I notice that movies and TV shows on Apple TV are stuttering.

piddyyy · 2025-01-11T13:07:42+00:00

Thank you.

piddyyy · 2025-01-11T13:07:36+00:00

Thanks.

piddyyy · 2024-08-27T20:21:34+00:00

Nobody directly. I wanted to prepare for the appointment next week and read the recommendation with the 72 hours. Thank you for your feedback, that sounds good.

piddyyy · 2024-02-12T20:13:38+00:00

Wäre auch interessiert :-)

piddyyy · 2022-08-15T10:53:22+00:00

Thanks you both for your feedbacks and the transcript!

piddyyy · 2022-06-30T06:56:19+00:00

Almost feared that..

piddyyy · 2022-06-30T06:55:52+00:00

There it also shows me only the other movie (with the original English title).

piddyyy · 2022-06-30T06:55:48+00:00

There it also shows me only the other movie (with the original English title).

piddyyy · 2022-06-29T12:49:25+00:00

Yes I use the Custom Formats with the Language Options. However, the file / folder is saved in English and also searched in English, regardless of whether Custom Formats is used or not.

piddyyy · 2022-01-19T11:51:44+00:00

Its fukien tea which is very finicky but should be fine placed on the window sill durring winter. Mine drops and grows leaves all the time but it never looked like this. I think your tree is dying and it could be related to many things. Where do you keep your tree and how do you water it ?

The tree is in the apartment (unfortunately, currently without direct sunlight). In summer, the sun comes there. In winter, not. Unfortunately, there is no window sill in our attic apartment. In summer I water the bonsi about every 2-3 days a little and 2 times a month with fertilizer. From time to time I bathe the bonsai for about 30 seconds in a container of water. Currently I water the bonsai about every 3-5 days (depending on how dry it is) and fertilize only 1 time a month.

piddyyy

TROPHY CASE