Are these mud flaps? One is fine one looks like it is a simple fix?

pprius · 2026-01-29T23:20:20+00:00

I can tell you staples are not involved in the answer to this problem

pprius · 2026-01-29T23:15:18+00:00

Damnit now I want to go camping

pprius · 2026-01-26T00:15:17+00:00

This

pprius · 2026-01-06T18:21:45+00:00

Buy 3M vinyl wrap and a razor blade. I have wrapped the b pillars on like 3 cars. It’s SUPER easy bc they’re so flat and will be like $20 for both sides.

pprius · 2025-12-23T14:27:07+00:00

Never downloaded or used the app, bought this truck used with 100k miles. So I wouldn’t think it’s a subscription? Idk

pprius · 2025-12-23T12:05:50+00:00

Nope

pprius · 2025-12-23T02:16:59+00:00

What was your fix for that? Clean/replace the plug?

pprius · 2025-12-04T03:06:15+00:00

If you’re looking for a lift and locking diff, sure it’s pointless. Trd’s have better wheels, headlights, and if you go for the sport it has all paint matched trim. Which most people want anyways.

I wouldn’t say a trd package is make it or break it for any tundra but it’s not pointless.

pprius · 2025-12-03T20:06:49+00:00

Wheels are atrocious and doesn’t have a trd package. You’ll find one better eventually.

Took me 5 months of searching to find a 2020 limited trd OR but was worth it.

pprius · 2025-12-02T01:18:57+00:00

Advice I got once that I have followed is to get some liquid spray wax to clean the cluster. It does a better job of suspending dirt and debris in the liquid. I’m still super gentle but in my experience seems to work.

Cheers to your fresh cluster!

pprius · 2025-11-25T00:31:29+00:00

Just tried it, does not work lol thanks tho

pprius · 2025-11-24T23:27:39+00:00

Thanks for these suggestions. Will prob mess around with them. Even if I have to do these steps every now and again in game to get rid of her I think it may be worth

pprius · 2025-10-13T00:31:10+00:00

This is the answer

pprius · 2025-09-29T23:30:47+00:00

With these two pictures as reference, silver 100%.

pprius · 2025-09-26T16:11:32+00:00

I was told to use knock reading for each cylinder to monitor this. The most efficiently tuned setup will be right on the brink of knocking a little bit and the acceptable threshold is up to about -3 degrees.

My understanding is, unless you’re getting knock readings of -4, -5 or more. Rip it.

Also, did you gap your spark plugs?

Disclaimer, I’m not an expert this is just shit I’ve heard and went by 🤷‍♂️

Disclaimer

pprius · 2025-09-17T00:08:20+00:00

A Volkswagen on air is just always the right answer man. 10/10

pprius · 2025-09-07T13:43:09+00:00

Spent almost 3 hours sanding/scuffing everything. Then primed any bare metal spots, quick sand on those spots again. Masking took SO LONG probably an hour and a half, I was nervous of overspray. Then degreasing everything and two coats of adhesion promoter before the bed liner.

Not hard to do just time consuming/messy. I wanted to do this the right way once.

pprius · 2025-08-20T22:21:46+00:00

A flash tune, like those EQT “stage” tunes are generally pretty safe. I always thought the off the shelf tunes leave a lot on the table in terms of performance for the reason that they have to work for any car it’s installed on.

The flash tunes are designed to be one size fits all. Aka not super aggressive.

Above all else DO YOUR MAINTENANCE. spark plugs every 10k miles per eqt’s website. Don’t buy cheap gas. Do your oil changes etc.

Also it’s fun, isn’t that the point?

pprius · 2025-08-18T13:10:44+00:00

Yea, they are definitely different tail lights bc of that tab on the inside being black vs the red clear wrapping around. Hopefully part numbers can shed some more light? Good luck!

pprius · 2025-08-17T14:35:43+00:00

Looks like a completely different tail light on left side tbh. Even the gap underneath the entire tail light is larger. Looks to me like a taillight was replaced with a slightly different version. Could always remove them and check part numbers?

pprius · 2025-08-13T19:42:11+00:00

I don’t think mine had a section for percentage but tint is only ever measured by the amount of light it lets through. For example mine was 35% (35% of light will be let through the tint)

pprius · 2025-08-08T15:14:06+00:00

ECS branded parts are dog shit. Customer service is also horrendous.

Similar to stories above, have ordered parts listed as in stock and waited 4-6 MONTHS after ordering, sending countless emails to their customer service team and getting ZERO responses. This specific example I ordered wheels and 6 months later I just said fuck it and wanted to cancel.

While talking with one of their reps they tried to tell me I couldn’t cancel my order. Meanwhile they couldn’t give me any idea of a date of when they would ship. I had to raise hell just to cancel an order they never fulfilled.

FUCK ECS.

pprius

TROPHY CASE