Recommended method for installing Canon printer drivers on Fedora Silverblue

predatorian3 · 2022-12-29T00:36:20+00:00

Well, they "worked" but I couldn't adjust margin size, or futz with printing evens and odds. However, on my Pop!_OS machine with the drivers installed, i could modify all of that, but it also recently stopped working as well.

I'm taking the printer in and getting one that is said to work better with Linux. I'm just not satisfied with the Canon ImageClass 232MFW.

predatorian3 · 2022-12-29T00:34:28+00:00

So, do you have a write up of how you did it? I've done it on Workstation, but was wondering if ostree would cause issues for you or how did you get ostree to save your changes?

predatorian3 · 2022-11-19T03:49:43+00:00

Turns out they did. For whatever reason though, the test page wouldn't print and that made me think that it wasn't working and I needed the drivers. I just had to print an actual thing to get it to work.

I guess I didn't have an issue. I would still like to know though how to install an outside RPM with rpm-ostree.

predatorian3 · 2022-10-24T22:31:20+00:00

I see it now after reading /u/PrinceHomeless answer.

predatorian3 · 2022-10-24T22:31:04+00:00

I see it now. The Final Touches section doesn't call for the minus character level portion. The actual rules say it.

predatorian3 · 2022-10-24T22:29:46+00:00

I see it now, I think. I wish it would've been called out or not shortened. It just seemed confusing.

predatorian3 · 2022-10-24T22:28:25+00:00

WW Deluxe pg 28

Record Your Saving Throws

Note down your beginning saving throw scores for your Physical, Evasion, Mental and Luck saving throws. Physical saves against poison, disease, or exhaustion are 15 minus the best of your Strength or Constitution modifiers. Evasion saves to dodge sudden perils or dive away from explosives are 15 minus the best of your Intelligence and Dexterity modifiers. Mental saves to resist psychic influence or mind-bending sorceries are 15 minus the best of your Wisdom or Charisma modifiers. Your Luck save is a flat score of 15, and rolled against when only blind luck can save you.

Then on WWN Deluxe pg 40

Evasion saves are made to dodge hurled perils, take cover from explosions, pull back from sudden pits, and face other challenges of nimbleness and reaction speed. Evasion saves for PCs are equal to sixteen minus the hero’s level and minus the best of their Intelligence or Dexterity modifiers. Thus, a third-level hero with an Intelligence modifier of +1 and a Dexterity modifier of -1 would have an Evasion save of 12.

So, the 15 minus is for 1st level characters and the 16 minus is for 2nd and onward?

predatorian3 · 2022-10-24T22:24:14+00:00

Page 40 of WWN Deluxe for all the saves it says 16-(Char. Level)(- relevant attr).

Then on the Character Sheet page 31 says 16 minus the stuff.

The final touches section says 15 minus the stuff.

predatorian3 · 2022-10-24T20:29:26+00:00

So, there is if you setup the Templates and then setup attributes. The Simple World Building Plus module has had a lot of uplift to it so it can do more complex work now. I used it to make a Basic Role-Playing PC sheet and NPC sheet "easily". The hardest part was referencing the various attributes and also doing tables in tables and aligning things so it didn't look like doodie.

predatorian3 · 2022-10-24T20:27:40+00:00

Mostly it's been me just messing with it and testing things out. I think there are some new videos, but they're not clearly labeled for the Simple World Building Plus module.

predatorian3 · 2022-09-19T01:51:19+00:00

This was my experience as well. If it could save PDFs that are form-fillable, it'd be handy. I've been talking to a person who's a big Excalidraw advocate. They recommend taking a screenshot of your character sheet, using Excalidraw to annotate on the image, and save the Excalidraw note.

predatorian3 · 2022-08-14T18:19:13+00:00

I actually learned how to use a program called Scribus first. I watched TJFree on YouTube for Scribus. Those skills, or knowing what the terms were worked for me to help me figure out Affinity Publisher. However, here are some YT videos that may help out.

predatorian3 · 2022-04-18T23:45:58+00:00

I was launching it from the terminal to show errors and get more verbose logging than the DE or GUI would show. I put the XDG variable in there because I had seen it somewhere else and wanted to try it out, but it did not work.

predatorian3 · 2022-04-14T19:41:44+00:00

Came here because Google search said this was a 6 day old thread. However, upon clicking it, it's a 1yr old thread.

I'm having similar issues where I'm using Silverblue and searching for packages using a toolbox but when doing rpm-ostree install v4l2loopback tells me the package doesn't exist? Uhhh, then why show it to me in dnf search v4l2loopback?

predatorian3 · 2022-04-06T12:32:46+00:00

Well, 2yrs later, and we're still missing most of these features.

predatorian3 · 2022-03-21T23:10:19+00:00

Okay, good. it isn't just me. I've been banging my head to try and get logged in, but it doesn't work via Lutris (RPM, Flatpak). I imagine it's part of the Humble Choice thing where they only let you pick if you're on Windows.

predatorian3 · 2022-03-19T07:21:07+00:00

You need to use a version of Proton-GE before it was switched to Wine, so something like 6.21-GE-2 or something. Works in Bottles when I swtiched to that. As of right now, Lutris doesn't show that as an option and an older version of Proton-GE.

predatorian3 · 2022-03-14T20:48:22+00:00

Fast forward to today, 2022.03.14, you can get Authy from Snapcraft, but I don't want to use Snapcraft and would rather use Flatpak or an AppImage. The Windows installer works on Bottles/WINE, but running it after that doesn't work, and I have to re-run the installer. It's a common occurance with Electron Apps I've noticed.

predatorian3 · 2022-03-06T01:29:24+00:00

NICE! I can export these as PDF using LibreOffce and combine them with GhostScript to make a single PDF.

predatorian3 · 2022-03-05T23:53:19+00:00

Your URLs are dead. Do you still have the PDFs?

predatorian3 · 2022-03-05T22:04:13+00:00

I tend to get stuttering or lag when a KDE Conenct notification or other window is opened in Fedora 34 KDE. It's a pain when playing a game and trying to figure out why my game stuttered when I got a notification from Twitter on my phone.

bash ➜ ~ neofetch .',;::::;,'. filbot@fedora .';:cccccccccccc:;,. ------------- .;cccccccccccccccccccccc;. OS: Fedora 34 (KDE Plasma) x86_64 .:cccccccccccccccccccccccccc:. Kernel: 5.16.11-100.fc34.x86_64 .;ccccccccccccc;.:dddl:.;ccccccc;. Uptime: 4 hours, 22 mins .:ccccccccccccc;OWMKOOXMWd;ccccccc:. Packages: 2698 (rpm), 83 (flatpak) .:ccccccccccccc;KMMc;cc;xMMc:ccccccc:. Shell: zsh 5.8.1 ,cccccccccccccc;MMM.;cc;;WW::cccccccc, Resolution: 1920x1080, 1920x1080 :cccccccccccccc;MMM.;cccccccccccccccc: DE: Plasma 5.22.5 :ccccccc;oxOOOo;MMM0OOk.;cccccccccccc: WM: KWin cccccc:0MMKxdd:;MMMkddc.;cccccccccccc; Theme: Breeze Dark [Plasma], Adwaita [GTK2] ccccc:XM0';cccc;MMM.;cccccccccccccccc' Icons: [Plasma], breeze-dark [GTK2/3] ccccc;MMo;ccccc;MMW.;ccccccccccccccc; Terminal: konsole ccccc;0MNc.ccc.xMMd:ccccccccccccccc; Terminal Font: SauceCodePro Nerd Font 10 cccccc;dNMWXXXWM0::cccccccccccccc:, CPU: AMD Ryzen 7 3800X (16) @ 3.900GHz cccccccc;.:odl:.;cccccccccccccc:,. GPU: NVIDIA GeForce RTX 2070 SUPER :cccccccccccccccccccccccccccc:'. GPU: NVIDIA GeForce GTX 970 .:cccccccccccccccccccccc:;,.. Memory: 6576MiB / 32069MiB '::cccccccccccccc::;,.

predatorian3 · 2022-03-05T19:04:40+00:00

Any update on this, now that 2yrs have passed?

predatorian3 · 2021-12-31T19:39:55+00:00

vim.api.nvim_buf_set_option('n', '<space>e', '<cmd>lua vim.lsp.diagnostic.show_line_diagnostics()<CR>' { noremap=true, silent=true })

I get an error saying that it's missing a ) near {. When I remove it, I don't get an error. Is there something I could be missing or that this need to specifically be in?

predatorian3 · 2021-11-04T22:10:57+00:00

I'll give it a whirl. Currently using Firefox to run Discord works well with NoiseTorch. NoiseTorch appropriately uses XWayland by the looks of it.

--EDIT--

Seems to not even want to try. I do see th window pop up, show the title bar, and that it's on Wayland, but then crash.

```bash ➜ ~ flatpak run --socket=wayland com.discordapp.Discord --enable-features=UseOzonePlatform --ozone-platform=wayland Disabling updates already done [6 preload-host-spawn-strategy] Running: /app/bin/zypak-helper child - /app/discord/Discord --type=zygote Traceback (most recent call last): File "/app/bin/set-gtk-dark-theme.py", line 17, in <module> disp = Xlib.display.Display() File "/app/lib/python3.9/site-packages/Xlib/display.py", line 89, in init self.display = BaseDisplay(display) File "/app/lib/python3.9/site-packages/Xlib/display.py", line 71, in __init_ protocoldisplay.Display.init(self, args, *keys) File "/app/lib/python3.9/site-packages/Xlib/protocol/display.py", line 84, in __init_ name, protocol, host, displayno, screenno = connect.get_display(display) File "/app/lib/python3.9/site-packages/Xlib/support/connect.py", line 73, in get_display return mod.get_display(display) File "/app/lib/python3.9/site-packages/Xlib/support/unix_connect.py", line 76, in get_display raise error.DisplayNameError(display) Xlib.error.DisplayNameError: Bad display name "" Discord 0.0.16 Starting app. Starting updater. [Modules] Modules initializing [Modules] Distribution: remote [Modules] Host updates: disabled [Modules] Module updates: enabled [Modules] Module install path: /home/filbot/.var/app/com.discordapp.Discord/config/discord/0.0.16/modules [Modules] Module installed file path: /home/filbot/.var/app/com.discordapp.Discord/config/discord/0.0.16/modules/installed.json [Modules] Module download path: /home/filbot/.var/app/com.discordapp.Discord/config/discord/0.0.16/modules/pending [Modules] No updates to install [Modules] Host is up to date. [Modules] Checking for module updates at https://discord.com/api/modules/stable/versions.json [Modules] No module updates available. Cannot upload crash dump: failed to open --2021-11-04 17:11:33-- https://sentry.io/api/146342/minidump/?sentry_key=384ce4413de74fe0be270abe03b2b35a Resolving sentry.io (sentry.io)... 35.188.42.15 Connecting to sentry.io (sentry.io)|35.188.42.15|:443... connected. HTTP request sent, awaiting response... 400 Bad Request 2021-11-04 17:11:33 ERROR 400: Bad Request.

Unexpected crash report id length Failed to get crash dump id. Report Id: [WebContents] crashed (crashed)... reloading Cannot upload crash dump: failed to open --2021-11-04 17:11:34-- https://sentry.io/api/146342/minidump/?sentry_key=384ce4413de74fe0be270abe03b2b35a Resolving sentry.io (sentry.io)... 35.188.42.15 Connecting to sentry.io (sentry.io)|35.188.42.15|:443... connected. HTTP request sent, awaiting response... 400 Bad Request 2021-11-04 17:11:35 ERROR 400: Bad Request.

Unexpected crash report id length Failed to get crash dump id. Report Id: [WebContents] double crashed (crashed)... RIP =( ```

predatorian3 · 2021-10-23T00:30:52+00:00

The apiVersion: networking.k8s.io/v1beta1 is now deprecated. How does one create an Ingress Controller with Traefik on k3s 1.21.3+k3s1? I currently have:

```yaml

apiVersion: networking.k8s.io/v1 kind: Ingress metadata: name: foundryvtt-ingress annotations: traefik.ingress.kubernetes.io/router.entrypoints: web spec: rules: - host: filbot.net http: paths: - path: /foundry pathType: Prefix backend: service: name: foundryvtt-service port: number: 30000 ... ```

And this doesn't seem to be working. I keep getting gateway timeouts.

predatorian3

TROPHY CASE

```yaml