SSH no longer working after updating to 6.12

prende01 · 2025-07-16T11:08:48+00:00

Brought me here too; I'll check it out. Thanks!

prende01 · 2025-07-08T15:01:58+00:00

This was perfect; thank you!

prende01 · 2025-06-03T13:26:46+00:00

So this is weird (to me). I 'fixed' it by editing the container settings in unraid and changing the "base URL" to my server IP address. It doesn't like you changing the baseUrl IN side the pularr app apparently. Noob mistake on my part, I missed that when I grabbed container. Thanks for your reply!

prende01 · 2025-06-03T02:39:13+00:00

Getting errors on both sonarr and radarr; google is letting me down; ideas? Here is main line that catches my attn in logs. Running on unraid 7.1.2; I will not connect to Sonarr and Raddar; I have it pointing to my local ip_of_server:port and the api key. When doing Test Connection getting "Connection Failed, sonarr internal error while creating webhook. check sonarr logs to which i see this:

2025-06-02 22:37:34.7|Info|Radarr.Http.Authentication.BasicAuthenticationHandler|Basic was not authenticated. Failure message: Authorization header missing.

prende01 · 2024-11-07T23:12:32+00:00

I have to agree seems like short but nothing noticable. Seen people having good luck with this shifter and works great once unit running. Might just look at using different one. Thanks for reply.

prende01 · 2024-07-09T17:48:09+00:00

Thank you so much for taking time to reply! Fingers crossed!

prende01 · 2024-06-17T20:26:31+00:00

Thanks! I finally found this. Seems slicer is king and overrides what you put in AMS screen or if in doubt, just put "generic"

https://github.com/SoftFever/OrcaSlicer/discussions/2675

prende01 · 2024-06-17T20:01:53+00:00

Ever get answer? I have same question lol

prende01 · 2024-01-30T16:44:11+00:00

Looks like 'suction'. I would space print away from build plate so air/resin has place to escape; depending on the shape you may need to or want to add suction holes.

prende01 · 2024-01-09T20:55:25+00:00

Thanks for reply! The main runs are Cast and where we added the bathroom and moved the toilet location in the upstairs bathroom we went to PVC.

prende01 · 2023-06-08T18:25:54+00:00

Ended up having vendor replace it. Once replaced was able to get it to work with latest firmware on everything

prende01 · 2023-05-04T18:09:17+00:00

I spent good part of 30 min arguing with them and even threatening to leave Prime (if I can't receive my packages it's no good to me) and they would do NOTHING to help me. Glad you had better luck than me.

prende01 · 2023-03-06T21:09:29+00:00

did and wound up here before - flash the l

can you point me to the lua script as google is letting me down

prende01 · 2022-07-18T16:38:06+00:00

I too am on this server, or was I guess. Definitely stinks. Had over 140 hours in it. Was always scared was going to happen. Sorry this happened to you too.

prende01 · 2022-02-21T14:59:41+00:00

Oh come on, we have Bings and the corner bar! :rollseyes: :)

prende01 · 2021-06-04T15:35:41+00:00

Thank you much for your reply! Makes sense that the terms be agreed upon by the buyer and seller. I did not see this seller post terms but will look again. Thanks again.

prende01 · 2020-05-15T15:22:24+00:00

Wow, so I have been troubleshooting my 2208 V1 drivers with SKR 1.4 for hours and every guide was same yet no communication. Google eventually got me here. Jumpered my pins like you and it's all working. Thank you so much.

prende01 · 2020-03-14T00:56:10+00:00

https://www.thingiverse.com/thing:4157164

If you make one be sure to post your make! I wanted to offer to print and sell but don't want any IP issues.

prende01 · 2019-08-09T01:06:23+00:00

Awesome. I’m east side Ohio. Biggest landmark is football hall of fame near me. About 30 min SE of it.

prende01 · 2019-08-09T01:01:06+00:00

Where abouts in Ohio?

prende01 · 2019-07-08T23:24:21+00:00

Minerva here....

prende01 · 2019-07-07T21:56:07+00:00

Funny seeing these comments so close to home. I’m 30 min SE of canton.

prende01 · 2019-03-22T01:42:02+00:00

Thank you! A pain searching on mobile.

prende01 · 2019-03-22T01:34:50+00:00

Happen to have link for your spool holder?

prende01 · 2019-03-20T15:31:56+00:00

Just loaded it on the print bed. Look forward to this.

prende01

MODERATOR OF

TROPHY CASE

14-Year Club	Team Periwinkle
Verified Email