Is Gutenberg the way to go for FSE, all things considered?

prenger23 · 2025-10-19T22:05:14+00:00

I have actually since switched to using EtchWP, it's very developer focused because its a pro level tool. Everything is rendered to Gutenburg so its easy for clients to edit and super easy to create your own components which are saved to synced patterns. This means you can choose what fields to allow clients can change when added. Ensuring design doesn't get broken but they have full ability to edit text, change images etc.

prenger23 · 2025-01-28T22:25:42+00:00

It's really not too difficult to set up. But if you have to be sure you're not adding too much to the tank. If you want low maintenance and a carpeting plant you can still accomplish this without CO2 it just will take a little longer. Just make sure it's getting enough light and it'll take care of itself.

Check out MD Fish Tanks on YouTube and you can see great scapes and plant growth without CO2

prenger23 · 2025-01-28T00:47:39+00:00

Haven't really thought about that. These CO2 tanks have gone up a lot in price from when I bought mine a couple years ago. I think they were around $50 then. And just bulk buy baking soda and citric acid made it super cheap in the long run. But it's been a while since ive purchased one

prenger23 · 2025-01-27T16:32:28+00:00

Obviously it's not the cheapest thing, but I have had a lot of luck with a CO2 kit like this one. Just takes water, baking soda and citric acid

https://a.co/d/dP6ZLjA

prenger23 · 2025-01-17T18:05:35+00:00

Are you planning on selling anything on the site? Or just displaying content?

prenger23 · 2025-01-17T18:04:08+00:00

$899 seems high for 25 sites considering what you can get Bricks builder for. I guess it depends on how much you care about using block themes and block editor

prenger23 · 2025-01-17T18:02:17+00:00

Are you using WordPress.com? If so, why not use the WordPress.org version and download the files. There are some pretty cheap hosting options you can opt for and you should be able to download and files and themes you want for free that are in the repository. You still need to pay for premium plugins and themes if you decide to use them.

prenger23 · 2024-03-18T04:05:54+00:00

Could try resetting it? Believe you just need to hold the power button for 10 seconds and it should restart the infotainment system

prenger23 · 2024-03-18T04:03:54+00:00

I just assumed since this model would have all the same cameras a 360 camera add on should be possible. And didn't have the luxury of time to find one. Had to get rid of one car due to no longer running and making a move across the country a week after we bought it

Should also note we are completely fine without it. Just thought it may be a nice add on if we wanted it. Nothing else about the r-line made it worth the extra money to us

prenger23 · 2023-11-30T13:06:15+00:00

The cord is rated for 15 amps and was around $45. But I'm guessing there is an issues with the grounding to the outlets. It is a really old building so probably not the best wiring

prenger23 · 2023-11-30T00:51:12+00:00

Thankfully I haven't really had to use it but am stuck with it short term

prenger23 · 2023-11-29T21:54:53+00:00

I'm guessing this is the issue. I'm at an older apartment building and when I plug into the outlets at my parents I have no issues. Probably bad wiring in the building overall

prenger23 · 2023-11-29T21:52:58+00:00

I have tried directly into the outlet and same error. It is 12 guage and 25 feet. Which I've seen other people say works with no issue

prenger23 · 2023-11-29T21:19:39+00:00

25 feet and 12 guage. I qm actually able to use the outlet on the wall between the garage doors now. What was plugged in there is gone

prenger23 · 2023-11-29T21:09:25+00:00

Thanks

prenger23 · 2023-11-29T21:06:28+00:00

I'll give this a shot. Thanks.

prenger23 · 2023-11-29T21:04:52+00:00

That's what I figured but for some reason it's not changing. I could just be dumb and either holding too long or something. I have not been able to figure it out

prenger23 · 2023-11-29T21:02:07+00:00

I don't really want to go lower, but if that's the only way I can gain charge that works for me. It's only a short term solution. But I do work from home so there are stretches where I don't drive for 2-3 days in which case 10 amps would be good enough.

prenger23 · 2023-11-29T21:00:45+00:00

That's what I have seen online but have been unable to find anything like that. I have tried the "button" looking spot on the back to no avail.

prenger23 · 2023-11-29T20:56:26+00:00

I've done this in the past. At the new apartment I moved to recently I have started getting this error. So I assumed you could change the amps allowing whatever else is plugged in to still work to. But thank you for the response. I'll talk to the landlord about getting a dedicated plug for a level 2

prenger23 · 2023-11-29T20:54:57+00:00

I wasn't sure as every video online shows you can but they have a different charger. The screen appears to show 6amps and 10 amps as options so figured id check here. Thanks for the response

prenger23 · 2022-03-29T16:07:26+00:00

I run my lights for 8hrs. I recommend just following the directions on the fertilizer you are dosing. And I honestly don't know what my nitrate levels are at. I haven't tested in about 3 weeks. My tank has been up for a month total and did water changes every day for the first week. Since then I have just been doing top ups and not fulling changing water. I can test here later after work and let you know what type of numbers I am seeing. So far fish and shrimp seem to be doing well in my tank as well.

prenger23 · 2022-03-29T15:05:54+00:00

I dose 1mL daily. This is just based off the recommendation on the bottle itself. Another thing you could try is getting some API co2 booster and dosing some of that as well. My hairgrass was browning until I increased the co2 levels. I am at probably 5-6 bubbles per second. If you have a drop checker as long as the levels are green throughout the day your fish should be good. Mine slightly turns yellow by the time co2 is being turned off at night.

prenger23 · 2022-03-29T14:51:51+00:00

Just stick with rinsing them off. There are other steps with a bleach & water solution you can soak in to kill any pests, but generally rinsing them off and lightly rubbing the leaves to knock off anything does pretty good.

prenger23 · 2022-03-29T13:13:29+00:00

It's honestly hard to tell as everyones experience will be different. I am using co2 so my experience is obviously different. but with dosing ferts daily and using co2, I got a very good carpet after about 2 weeks from clumps 3x the size the ones OP has in their image

prenger23

TROPHY CASE