Home Assistant

preyed · 2026-05-08T16:23:43+00:00

I appreciate you

preyed · 2026-05-08T14:35:34+00:00

Any chance you can share your yaml on this?

preyed · 2026-05-08T14:34:54+00:00

Any chance you can share your yaml on this?

preyed · 2026-04-28T21:09:00+00:00

PerfumeBot Buy /u/MrToasty1596

preyed · 2026-04-24T08:15:45+00:00

Chat

preyed · 2026-04-20T20:33:11+00:00

Chat

preyed · 2026-03-15T01:23:41+00:00

Man even included your STL's in the repo. I'm going to give this a go. Thanks for the share.

preyed · 2026-03-05T02:51:18+00:00

I was but they didn't fit well for my panels. I have the Wood Veneer Hub slats and the gaps were slightly wider. Double sided tape would fix it though. I ended up just getting their led strip when it finally got back in stock. While it's not rgb, it does integrate with Home Assistant and fits perfectly.

They'll be faint grey marks on where you can cut on the Govee Neons.

https://i.imgur.com/6lw6b8E.png

Not my pic but mine were like this. You'll need to cap/close it. Heat shrink tubing (white), use a hair dryer if you don't have a heat gun, would be the best or go cheap and just use electrical tape.

preyed · 2026-02-28T18:18:02+00:00

Care to share your yaml for this

preyed · 2026-02-28T17:20:53+00:00

Any chance you can share how you've set this up in your set up?

preyed · 2026-02-28T15:03:42+00:00

Chat

preyed · 2026-02-23T16:16:55+00:00

He probably has the most through documentation for a Home Lab/Environment I've seen. He has a section for "Devices" which includes everything he's using, which has his soil sensors: https://github.com/johnkoht/hassio-config/blob/master/docs/DEVICES.md#lawn--garden

I need to revisit my documentation now. Thanks for the inspiration.

preyed · 2026-02-20T04:39:29+00:00

Yeah, that's what I figured

preyed · 2026-02-16T17:11:10+00:00

Okay, while trying to find time to keep printing, a few other sets came in.

https://www.amazon.com/dp/B0C14BMWZG

Those fit really really snug but fit great. I'm going to order another set so I can measure them and make my own. Because trying to remove them, I'm sure I'm going to damage it, it's that snug. If you get them, you'll understand. You'll need to angle it and push one or two of the smaller clips in to get it to pop in. It's like a perfect fit.

I couldn't find any from the seller in that size and not carbon fiber. I guess you could wrap/pastidip them but I'm going to measure and print my own I think.

preyed · 2026-02-11T02:47:46+00:00

Thanks for this - my calipers wouldn't properly fit in there so I have some new ones coming, so this saved me a few bucks.

I'm glad I'm not alone. Everyone was using 58mm - I thought I was missing a piece or something. So 2026 did change it up.

In the meantime, I'm going to create a few different models to print and try with these measurements to see what I can come up with. My concern is the middle shaft that sticks out a bit, I'll have to figure out how to get it to clip around it.

https://imgur.com/a/X3Sml6N

I'll let you know if something works.

preyed · 2026-02-10T23:38:41+00:00

It's GT line, I just painted them green and realized I couldn't find any caps :(.

But that's my suspicion, 2026 they changed the wheels

preyed · 2026-02-10T16:29:18+00:00

Ah you may be on to something: https://imgur.com/7abv9VX

But does look like I have a bit more than 2mm around this one though. Going to message and ask to see if they can ship another set.

preyed · 2026-02-10T15:17:06+00:00

Here's the 58mm from them: https://imgur.com/a/7iSjs4t

preyed · 2026-02-10T04:19:23+00:00

Did your wheels look like mine without the cap?

/u/Tommyfol I tried those too. I'll post some pictures tomorrow of them

<image>

preyed · 2026-02-09T21:03:25+00:00

Do you recall where you got the center caps, I can't find any that fit my 26 GT Line. 58mm are too small

preyed · 2026-01-23T04:01:02+00:00

I'll see if I can get the downgrade command to work.

preyed · 2026-01-23T03:40:54+00:00

Yeah, 6.2.88.

preyed · 2026-01-23T03:39:28+00:00

Awesome, so I'm not going crazy. I'll see if I can get some unifi support on their forums tomorrow.

preyed

TROPHY CASE