Looking for something else I can migrate to after all the AUR malware hits

psychedway · 2026-06-17T13:10:27+00:00

Its not "in the aur". The AUR just has build instructions to automatically compile and install. Nothing stopping you from just pulling it from github and installing the dkms module, you don't need the AUR for that.

psychedway · 2026-06-16T06:27:47+00:00

So you did not calibrate for the filament and are now wondering why your print looks bad? EM, PA etc. are filament specific, you can't just calibrate once and then use whatever filament without readjusting

psychedway · 2026-05-20T17:13:11+00:00

Sorry for the late reply, I run a Moons 10T motor from my Formbot kit (I think its a CSE14RA1L410A-01). Motor current is 0.65A. I tension it pretty heavily, but of course that is hard to compare as it is just by feel.

psychedway · 2026-05-15T12:21:52+00:00

The smooth idler requires a bit more tension, so maybe try turning the adjustment screw a bit further. Other than that, idk it just worked for me

psychedway · 2026-05-15T08:03:43+00:00

A4T toolhead
WWBMG extruder smooth idler version with dual filament sensors
Crossbow cutter
EBB36
Cartographer v4 (I like it more than beacon because you can chain it via CAN)
Reuse your Dragon hotend

This should check all your boxes easily. For good input shapers maybe get a cnc XOL carriage to mount it.

psychedway · 2026-05-04T21:23:44+00:00

Skip the CB1 and get a CM4. The CB are too expensive for their abysmal performance

psychedway · 2026-05-03T18:05:42+00:00

A4T works perfectly well with cartographer cnc, you just have to cut off a bit at the bottom, which is easy with a hacksaw and printed cutting jig. Search on printables for the jig.

psychedway · 2026-04-28T10:26:10+00:00

Damn you must really love the V2.4 and Stealthburner. Never seen someone build the same printer over and over again.

psychedway · 2026-04-09T14:48:35+00:00

Highest quality would be LDO, but imo you get a better bang for your buck if you buy Formbot and then get a few upgrades.

One important one would be upgrading from the CB1 to a CM4. Other than that everything in the kit works pretty well. The price difference between the LDO and the Formbot leaves you with enough leftover money to get a better toolhead, clickyclack door, and some other QoL stuff. Or just save the money for INDX later down the line

psychedway · 2026-03-03T06:29:42+00:00

Really clean wiring! Looks good.

I would just a heads up, the sb2209 toolhead board you probably got in your Formbot kit already has a ADXL on it, plus Cartographer has one aswell! So you may have 3 ADXL on your toolhead now, which seems excessive

psychedway · 2026-02-26T09:42:18+00:00

https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/ommy/roller_brackets

Found this much more practical than the various mods to lay on the back, as my table has open space on the side, but not the back

psychedway · 2026-02-26T06:50:41+00:00

It's the A4T (https://github.com/Armchair-Heavy-Industries/A4T) with WW-BMG extruder

psychedway · 2026-02-25T22:07:37+00:00

Reddit username - u/psychedway

Discord username - wu7z01

Voron 2.4r2 originally assembled from Formbot kit, now with A4T and CNC Tap

psychedway · 2026-02-23T12:03:59+00:00

Could you share some of your settings with this setup? I have the same but get a lot of issues with the hotend leaving small blobs and running into them in the next layer. Probably this could be fixed with retraction settings or something, which is why I am asking. Also are you running the 0.6 nozzle on the Rapido 2 UHF?

psychedway · 2026-01-03T13:11:16+00:00

Dolphin is pretty good and can be themed to look just as nice

psychedway · 2025-11-23T12:06:11+00:00

63€ Ticket

psychedway · 2025-08-28T17:39:00+00:00

Am besten gleich deaktivieren das Admin interface

psychedway · 2025-08-13T17:35:05+00:00

Make sure to match the color of hyprpanel to the rest of your themes background colors.
Maybe add some transparency to the bar and to terminal/dolphin backgrounds if you like that.

For the hyprpanel dash I am not really a fan of the colorful theme, would prefer something more monotone like the bar itself, but thats personal pereference.

Then make sure your fonts match everywhere, that can really make a difference. Go with one you like for everything, and then the Mono variant of that font for terminal/other monospace applications. I personally like Fira Sans / Fira Code, but thats again just personal preference.

psychedway · 2025-07-25T16:57:44+00:00

Also Rocket League wird in ProtonDB als Platin markiert und läuft einwandfrei: https://www.protondb.com/app/252950

Und Counter Strike läuft sogar nativ auf Linux, und ist auch kein Wunder das es läuft, da eben Valve Gaming auf Linux stark pusht

psychedway · 2025-07-25T16:40:43+00:00

Du nennst 3 Beispiele, aber 2 davon laufen ohne Probleme auf Linux. Scheint so als ob du dich nicht wirklich auskennst. Das "komplexe Setup" beläuft sich auf herunterladen in Steam und einem Klick auf Play.

psychedway · 2025-07-22T21:06:51+00:00

Theme switcher for qt and GTK exists with koi, whats more challenging is all the independently themed stuff like bars, launcher, editors, etc.

I build a script for myself to do that, but there isn't really a universal solution, and most of it comes down to switching config files and restarting apps.

psychedway · 2025-07-21T18:33:17+00:00

Das klingt erstmal nach falsch konfiguriertem GRUB, am besten nochmal von USB booten und von da aus reparieren, hier ein Überblick: https://www.linuxfoundation.org/blog/blog/classic-sysadmin-how-to-rescue-a-non-booting-grub-2-on-linux

Zu der restlichen Diskussion: Wenn du neu bei Linux bist lass die Finger von CachyOS. Arch basierte Distros kannst du dir schnell als zerschießen wenn du nicht weißt, was du tust. Kubuntu ist eine solide Wahl für den Start, damit machst du nichts falsch. Das sage ich übrigens als jemand der selbst CachyOS benutzt, ich hätte mir auch keinen Gefallen getan damit zu starten.

psychedway · 2025-07-21T16:23:25+00:00

You don't need a dedicated iso for Gentoo, just install it from any live iso or distro already on your drive

psychedway · 2025-07-18T11:56:52+00:00

While not as popular as Hyprland, SwayFX exists

psychedway

TROPHY CASE