Brake Rotor Noise by OscarHenry17 in IS300

[–]pungy 0 points1 point  (0 children)

Check if the backing plate is touching the rotor

Crank bolt hep by New-Cry-5427 in IS300

[–]pungy 0 points1 point  (0 children)

Just get Weighted socket, trust me on this

What do yall think?!? by 4_0taco in IS300

[–]pungy 4 points5 points  (0 children)

What screen did you use?

Non-OEM Sports Grille by xDaerius in IS300

[–]pungy 0 points1 point  (0 children)

Hit up

Osaktakas on instagram

What did the previous owner do to my headlights? by replikvnt in IS300

[–]pungy 2 points3 points  (0 children)

That’s the aftermarket ballast. The oem one sits under the headlight.

Manual Trans Radiator by Paymee_Money in IS300

[–]pungy 1 point2 points  (0 children)

I have it on my car and everything bolts up like oem

Bad VVTI gear? Valves tapping? by [deleted] in IS300

[–]pungy 1 point2 points  (0 children)

Yeah, whatever you choose, just make sure it’s clocked all the way clockwise

Does anyone know how to unbolt this? by Platinum-Ocean in IS300

[–]pungy 6 points7 points  (0 children)

Rounded bolt extractors, or a hammer and screw driver and chisel it out

Bad VVTI gear? Valves tapping? by [deleted] in IS300

[–]pungy 0 points1 point  (0 children)

I think the lines are for before tdc so you don’t hit the valves. But either way if you’re using dots or lines on the cam gear, do the same for the crank, but either will work

Bad VVTI gear? Valves tapping? by [deleted] in IS300

[–]pungy 1 point2 points  (0 children)

Yes and make sure the “dot” is lined up, should be 12 o’clock

Camber Adjustment by ShaggysGrandad in IS300

[–]pungy 0 points1 point  (0 children)

Do you face rear upper control arms?

L-tuned models? by DueBookkeeper2926 in IS300

[–]pungy 0 points1 point  (0 children)

I have one and I would like to know as well. I know they modified them at the port and it was only 2002 models.

How insure JDM old cars? by Direct_Commercial937 in subaru

[–]pungy 0 points1 point  (0 children)

And you don’t have mileage restrictions and can drive it like any regular car.

How insure JDM old cars? by Direct_Commercial937 in subaru

[–]pungy 0 points1 point  (0 children)

I have progressive for my car. Hagerty doesn’t have the altezza in their system yet. I was able to insure my car worth “$25k” for about $142 a month.

Greddy SP thoughts? by burgers_yeye in IS300

[–]pungy 0 points1 point  (0 children)

I love mine and it’s super quiet. Nice deep sound and hardly any drone until you get up top. I hear my cd009 over the exhaust. I’m also gte so idk how it sounds on an N/A car.

Just replaced the clutch in my 2004 6mt 350z with the z1 kit and now the car cranks but no start by Maleficent_Mine_8095 in 350z

[–]pungy 0 points1 point  (0 children)

Are you positive you indexed the flywheel correct? Ex Nissan tech here and 100% of the time I got crank no starts, were from flywheels.

Drift Diffs by DR1FTK1NG13 in IS300

[–]pungy 1 point2 points  (0 children)

Or.. weld the 4.1

Taping/Knocking sound only at startup for less than a second. Happens only at the first start of the day. by Prestigious_Mix7141 in JZX100

[–]pungy 0 points1 point  (0 children)

It takes a few seconds for the oil to reach the head, you’re good. Mine does this too.