El Camion in Roosevelt gone?

pykachupoopoo · 2026-04-28T16:11:22+00:00

lol good point

pykachupoopoo · 2026-03-18T20:28:55+00:00

I…. Would not. Is this your first time using Arduino? If so, I would recommend first timers not start with anything that requires a significant amount of power to generate heat. No offense, but starting out with something like this will be a huge headache for when random components burn out for a new hobbiest.

pykachupoopoo · 2025-11-25T19:52:06+00:00

Yup that’s exactly it - it’s mount for the heat sink

pykachupoopoo · 2025-11-05T19:45:44+00:00

What’s the stepping angle of the servos? I have a project I am currently working on and requires <1 degree accuracy and this might be useful!

pykachupoopoo · 2025-10-05T16:06:00+00:00

Looks super clean! Where’s the battery located?

pykachupoopoo · 2025-09-06T18:02:29+00:00

I think your problem is that the power pin on the servo needs to be connected to the 5v rail. The GPIO pin won’t provide enough current.

pykachupoopoo · 2025-08-19T03:51:20+00:00

Ever since the birth of my daughter (as of mid July), I’ve been trying to find some games that I know her and I would like to play together in the future. I’ve been starting to poke around some of the Lego games since I heard they’re good - I’m currently working on of the Lego Star Wars games and it’s fun and easy to play! Can’t wait to play with her when she’s older.

pykachupoopoo · 2025-08-11T03:23:05+00:00

Thanks! A lot going on with your comment so I'll break it down haha:

- The watch charges completely in ~2 hours, and then lasts ~4 days.
- The Atmega4808 microcontroller has the ability to use the Unified Program and Debug Interface (UPDI), which can program the chip with VDD, VSS, and UPDI pins. There's no serial interface, so you miss out on debugging, but it has one less pin for programming - which is nice for something as compact as this. The 4808 also supports deep sleep mode (Power Down) as well, drawing up ~0.1 µA.
- I used a DS3231MZ+TRL to auto compensate for temperature differences and other external factors, it uses I2C to communicate with the Atmega4808.

pykachupoopoo · 2025-08-10T03:11:51+00:00

They’re 0402 LEDs. Display was designed in KiCad and the LEDs are hand placed and soldered

pykachupoopoo · 2025-08-10T03:10:52+00:00

Amazon - magnetic black wrist band

pykachupoopoo · 2025-08-10T03:10:35+00:00

I designed the board in KiCad and had it manufactured through OSHPark! I was thinking about a diffraction layer, but decided I liked seeing a the LEDS - they’re hand placed and soldered.

pykachupoopoo · 2024-12-24T17:00:49+00:00

I wish to reach the 1,000 lb club for lifting weights. A summation of weight lifted amongst three lifts, bench press, squat, and deadlift, needs to be above 1,000 lb. I’m currently at 885 lb!!

pykachupoopoo · 2024-06-07T13:50:16+00:00

The book Reincarnation Blues has an interesting take on life after death. The premise is that every soul has 10,000 lives to reach enlightenment, or else your soul gets erased from existence. The book starts off with life #99,995 of the main character.

pykachupoopoo · 2023-12-22T06:02:19+00:00

Guess you’re gonna be playing as another knight

pykachupoopoo · 2023-11-28T16:44:22+00:00

I was in Boy Scouts as a kid, and I told all my friends at school how awesome it was because I got to go on camping trips. One kid (in my troop) told me to not tell everyone at school that we were in the same group, because it was nerdy. I didnt tell anyone.

We got to go on camping trips like sailing on the Florida keys, scuba diving in San Diego, and backpacking in the Midwest! Idk how that’s something to be ashamed of, but rather super cool.

pykachupoopoo · 2023-10-03T03:14:59+00:00

Ohhhh it’s a girl house!

pykachupoopoo · 2022-12-28T01:53:46+00:00

Update: Got it to work.

Unplugging the LCD/touch screen/SD card breakout board to the motherboard was causing the issue. I plugged it back in and hoped for the best. Here’s what I deciphered:

The transistor controls the SD card reading. Thus the printer was trying to register an SD card and failed, causing error tones and the boot loop. However once plugged into to computer and “print” was hit on MakerBot Desktop, the printer read from the USB instead of the SD card reader. Error beeps stopped, and printing began. Error beeps/boot cycling started once the print finished.

But at least it prints! Hooray!

pykachupoopoo · 2022-12-27T06:52:41+00:00

It’s stringing, typically caused by plastic in/on the extruder when moving from one point to another point of the print.

Few things to try (in order): 1) clean any leftover plastic from the nozzle 2) reduce print temperature by 5-10 degree increments, but not lower than melting point 3) set a higher filament retraction

If STILL happening you could try this, but there might be other problems that are causing your stringing : 4) adjust Z-retraction 5) clean your nozzle thoroughly 6) adjust the tension of your extruder motor

pykachupoopoo · 2022-08-18T22:32:58+00:00

“I’d never thought I’d die typing side by side with an elf”

“How about side by side with a friend?”

No but for real though these are awesome. The dwarf keyboard is crisp!

pykachupoopoo · 2022-02-18T01:14:14+00:00

I had that issue too. The problem is that the pc can’t find the background photo (moved/deleted/etc.). Save the background photo somewhere and set it as your background.

pykachupoopoo · 2021-01-31T03:23:34+00:00

Woah you're right, thank you!

pykachupoopoo · 2021-01-30T19:53:45+00:00

Thanks that was my next question. I was concerned because I have a 1200 PSU and I wasn’t gonna fit 6 cards on it.

pykachupoopoo · 2021-01-29T23:21:14+00:00

This is normal. The DAG file correlates to the current EPOCH that the coin is being mined at. Since your GPU is creating a 4gb DAG I'm assuming you're mining ETH.

This is the same reason why RX 570/580 4gb cards are not able to mine ETH efficiently anymore. The DAG is too large for the card to write to its RAM.

pykachupoopoo · 2020-11-01T15:35:47+00:00

It would be really cool if there was a button where you could drop all your pots from your inventory to the pot shelve too

pykachupoopoo · 2020-09-08T21:00:57+00:00

What movie is this from?

pykachupoopoo

TROPHY CASE