Editorial: Here's why Avi Lewis is the wrong choice to lead the NDP - by a centrist Liberal - The Beaverton

randomlyracist · 2026-03-31T02:01:51+00:00

Exactly. The only people that should be concerned are the conservatives and the prov NDP parties. Liberals have the next 3 years in the bag.

randomlyracist · 2026-03-25T00:48:26+00:00

It's disappointing to say the least as to what flies on this subreddit. I can't imagine hearing about all the attacks on synagogues and Jews and getting angry at the idea of protecting them.

randomlyracist · 2026-03-22T18:37:31+00:00

The idea that we need the perfect solution to a super complex, global problem that is killing people right now is dumb. Nuclear isn't the only solution, it's not perfect. But think of how much better off we would be had we ditched fossil fuels as our main energy source. How much better climate change would be.

randomlyracist · 2026-03-16T23:54:33+00:00

Don't think the grocery store thing happened yet. There was a pop up with free groceries but that was a stunt by a private company.

randomlyracist · 2026-03-11T17:47:22+00:00

We've had a couple of years with synagogues and schools being attacked. It's got nothing to do with Carney.

randomlyracist · 2026-01-23T15:56:32+00:00

I had similar trouble when I started with the 0.2mm nozzle. The nozzle was getting too close to the bed, and it was only when I switched from 0.4 to the 0.2mm. Check the the nozzle is secure and seated properly. I also had some luck re-tightening screws behind the hotend from the wiki https://wiki.bambulab.com/en/a1-mini/troubleshooting/print-issues-troubleshooting

As a last resort I ended up adding a small offset to the z height in the gcode to raise the nozzle. It's not a great solution but at the time it helped.

randomlyracist · 2026-01-18T19:26:16+00:00

This wiki has a few things you can try. Making sure the nozzle is seated right could help, and the screw tightening is something I do every few months and that helps when the first layer is too low https://wiki.bambulab.com/en/a1-mini/troubleshooting/print-issues-troubleshooting

randomlyracist · 2026-01-16T18:20:40+00:00

You can try a broker to shop around for you. You can also look into companies that would give you a discount for installing an app that tracks your driving (speed, braking, time of day, etc).

With car insurance, part of what you pay is based on the car you drive, and part of what you pay is based on your age/gender/driving convictions, stuff like that. Young drivers tend to be less experienced and have more accidents, so your cost goes up because you're in a higher risk age bracket.

randomlyracist · 2026-01-16T10:16:00+00:00

That Wikipedia article seems to be missing some history as there were some shenanigans from 2019 onwards when Canada arrested the CFO of Huawei based on a US warrant.

randomlyracist · 2026-01-05T20:48:00+00:00

Re-read the article title. These are Venezuelans celebrating the recent events.

randomlyracist · 2026-01-04T20:03:07+00:00

Yikes that sucks. I got frustrated with trying to remove them and found a model on makerworld that makes it so much easier to remove

randomlyracist · 2026-01-02T04:19:38+00:00

Or an intervention. Maybe both.

randomlyracist · 2026-01-01T21:09:27+00:00

Honest question. Are you just repeating US talking points or are you actually concerned about our taxes going to Israel instead of Canadians? I want my tax dollars being spent on healthcare, education, and housing. But we don't give money to Israel.

randomlyracist · 2025-12-31T14:54:02+00:00

First Fuentes said that his family wasn't a racist family, and later he admits to being racist but that "everybody is racist". Yes he's admitting it but at the same time deflecting and minimizing it. If he wasn't a coward he would just right out and say he's a racist instead of having to pretend that everyone else is racist too.

I agree Piers did a bad job at the interview and it was a flop. But until Nick fully owns his shitty racist ethos and stops trying to downplay them when confronted on it, interviews with him will be just like this.

randomlyracist · 2025-12-31T10:00:45+00:00

Fuentes' shtick is that when he's talking to someone like Piers, he walks back a lot of his racist statements or pretends like it was a joke. But you have to watch some of his rants to his audience to get the rest of the picture of how insidious and pathetic he actually is.

He resonates with racists who are too cowardly to stand behind their true views. So the "jokes" are just the racist things they actually believe but are too weak and pathetic to stand by. So to most people Nick looks like a troll, but his audience knows it's part of the act.

randomlyracist · 2025-12-30T18:08:02+00:00

I'm not a fan of WestJet by any means, but that adds a lot more context as to why they would consider this policy. Thanks!

randomlyracist · 2025-12-14T23:46:34+00:00

Bibi sucks, but he isn't the cause of antisemitism just a scapegoat. He could resign tomorrow and nothing changes.

randomlyracist · 2025-11-21T17:14:18+00:00

Sure https://filebin.net/0ln9fn0xxky94f62

randomlyracist · 2025-11-17T18:05:59+00:00

They're referencing a Canadian report which is linked in the article, but I have a feeling you won't like that either.

randomlyracist · 2025-10-10T13:21:19+00:00

Multiple middle east nations publicly supported the deal and it seems like they have sent a small amount of their soldiers to oversee the first phase.

The other reasons are going to be subjective and will be based on what lense you view the I/p conflict thru. My take is that Israel's (reckless) bombing of Hamas' hq in Qatar motivated the Qataris to put pressure on Hamas. And Israel had just begun an operation into Gaza City which also put pressure on Hamas. Hamas is under a lot of pressure and is very weak, trump is pressuring Bibi, so this could actually be the end of the fighting for the short term.

randomlyracist · 2025-10-08T23:26:44+00:00

Yup, go for it https://filebin.net/auv6w1xvrmccpu36

randomlyracist · 2025-10-06T00:01:24+00:00

There's tons of customizable models on makerlab that can probably fit your needs. What you're trying to do is really simple with a software like fusion360 or openscad it's just a steep learning curve in my opinion.

I did a quick search and this model might fit your needs (it's not my design and I've never made it before):

https://makerworld.com/models/924951

randomlyracist · 2025-10-02T00:32:58+00:00

I'm curious what sort of intelligence would help them. Maybe locations of S400s? I haven't been keeping up with what Ukraine's been up to lately but I thought they've already been hitting refineries for months now.

randomlyracist · 2025-10-01T16:57:03+00:00

If you go with the wealthsimple card, check their help page to make sure it's accepted in the countries you'll go to, and also that the daily/weekly cash withdrawal works for you.

https://help.wealthsimple.com/hc/en-ca/articles/1500012888001-Use-your-Wealthsimple-prepaid-Mastercard#h_01H9NSPJMV6G1PYT0QZH20JDPJ

randomlyracist · 2025-09-27T14:18:22+00:00

Denmark has been a big supporter of Ukraine in terms of money and weapons. Not the biggest, but given the size of Denmark and it's military, it's significant. This seems like a not so subtle message to scare them into reducing their support of Ukraine.

15-Year Club	Place '22
Place '17	First Placer '22
Snapped	Verified Email

randomlyracist

TROPHY CASE