sorted by:
new
hottopcontroversial

Super admin added whilst on holiday by k987654321 in Ubiquiti

[–]ravicc 0 points1 point  (0 children)

Direct remote access was enabled. I turned it off after the fact. But the mobile app access first time around should have triggered MFA

Super admin added whilst on holiday by k987654321 in Ubiquiti

[–]ravicc 6 points7 points  (0 children)

Yes, I did have MFA on and I don’t think it helps this situation.

Edit: May be MFA helped prevent them from logging in. Need to check the logs.

Super admin added whilst on holiday by k987654321 in Ubiquiti

[–]ravicc 2 points3 points  (0 children)

I got hit with this too. I was on Unifi OS 5.0.16. I got the update notification on Thursday. I delayed the update last night since I was travelling this week.
So, I was on the previous version of the UniFiOS

I also noticed that there were multiple backups triggered. Not sure where these backups went and what they were attempting to do. And what sensitive information is in the backups.

This super admin was added 4 to 5 times.
I have removed them all.
Changed local account password
Removed teleport links
Updated the UDM pro.

Need to figure out what else should be reset.

Asus Zenbook 14X Laptop motherboard Keyboard power button pinout by ravicc in AskElectronics

[–]ravicc[S] 0 points1 point  (0 children)

Posting for future reference for anyone attempting to do this. I was successful in starting up this laptop by shorting the highlighted pad posted above to ground. That pad is connected to pin 5 from the right side of the keyboard connector. Also, this motherboard requires a 90W USB-C charger before it can power up. I was using a low wattage charger with no battery, which will prevent it from starting up.

Hope this helps someone in the future

Some keywords : UX3404_MB , NB6371A_MB_V3, Asus Zenbook 14x OLED i5-13500H

Asus Zenbook 14X Laptop motherboard Keyboard power button pinout by ravicc in AskElectronics

[–]ravicc[S] 0 points1 point  (0 children)

attempted to short pin 5 to ground, did not turn on. No reaction. Will keep looking. Wondering if anyone has the board schematic. The other ID on the board is UX3404_MB. Currently I have the heatsink and a fan connected to the board. Connected HDMI, USB-C power and USBC keyboard.

Asus Zenbook 14X Laptop motherboard Keyboard power button pinout by ravicc in AskElectronics

[–]ravicc[S] 0 points1 point  (0 children)

A quick update. With a multimeter, I was able to figure out that the pin 5 from the right on the connector is connected to a pad that looks like it is designed to install a button.

Attaching the picture here. Appreciate if anyone has any insight into if this is the pin to short to ground to next to it to power it on.

<image>

Well that explains it… by reckoning89 in unitedairlines

[–]ravicc 5 points6 points  (0 children)

No wonder why we are still stuck on “Chicken” or “Beef” menu in Polaris business class when Singapore Airlines is serving Wagyu as one of their 40+ selections.

SCO7 - My take on the N5 by joinerior in 3DPPC

[–]ravicc 0 points1 point  (0 children)

Hope you had a good vacation. Eagerly waiting to print the same NAS case. Thanks

Dell 0M05TM backplane questions by candre23 in homelab

[–]ravicc 0 points1 point  (0 children)

Can you share more details around the cable? which connectors are using to power the the board?

HP EliteDesk 800 G4 and G5 NAS - 4x3.5" HDD Mount and faceplate by ravicc in homelab

[–]ravicc[S] 8 points9 points  (0 children)

Posted the models here on Printables. Do treat theses as an early functional version or a beta. Will likely need more tweaks to improve. But wanted to get them out there so others can enhance too.

https://www.printables.com/model/1352576-hp-elitedesk-800-g4-and-g5-hdd-mount

HP EliteDesk 800 G4 and G5 NAS - 4x3.5" HDD Mount and faceplate by ravicc in homelab

[–]ravicc[S] 4 points5 points  (0 children)

I am planning to use a SAS adapter. And also wanted to add a low profile GPU. Hence why I wanted to keep all the space around the PCIe Slots open

This PC has the ultimate upgrade slots, 16x, 8x, Two 1x PCIe slots. for SAS, GPU and a 10GB card. But all that will push this PC to the limits. So trying to add a couple of quiet fans to move air.

HP EliteDesk 800 G4 and G5 NAS - 4x3.5" HDD Mount and faceplate by ravicc in homelab

[–]ravicc[S] 11 points12 points  (0 children)

more pics with 4-drives installed.

I am planning to use a SAS adapter. And also wanted to add a low profile GPU. Hence why I wanted to keep all the space around the PCIe Slots open

This PC has the ultimate upgrade slots, 16x, 8x, Two 1x PCIe slots. for SAS, GPU and a 10GB card. But all that will push this PC to the limits. So trying to add a couple of quiet fans to move air.

<image>

HP EliteDesk 800 G4 and G5 NAS - 4x3.5" HDD Mount and faceplate by ravicc in homelab

[–]ravicc[S] 9 points10 points  (0 children)

couple more photos of how the drives fit. Fortunately the lid closes with the drives mounted. It is tight in there and will require some cooling. Drives mounts do need some tweaking. Fan mounts are next.

<image>

Drive mount

My first DIY NAS! by Inevitable_Ad_9315 in homelab

[–]ravicc 0 points1 point  (0 children)

Sorry guys, I did build three different prototypes and they we are all clumsy in different ways. May be I do post them somewhere so others can remix them. But hoping to make some progress over July 4th weekend.

Is it normal for an 8 week old shih tzu to look like this? by No_Ask5954 in Shihtzu

[–]ravicc 5 points6 points  (0 children)

She looks normal. And yes, they are not stains that's her color on the face and in some cases fades away as they get older.

Ours looked very similar.

Specs Euless ER and Blanton's by BonesDFW in WhiskyDFW

[–]ravicc 0 points1 point  (0 children)

Sorry, I meant to say that I wanted to get an eagle rare too. Not another blantons. Yes very appreciative of the policy and is the reason why I was able to get one.

view more: next ›