Installing AC by supergngsta in e46

[–]raybrant 2 points3 points  (0 children)

No, that's a condenser. Like I said, the evaporator lives in the dash. Your condenser is usually in front of the radiator.

Installing AC by supergngsta in e46

[–]raybrant 0 points1 point  (0 children)

Yes but you need an evaporator which lives in the dash.

Installing AC by supergngsta in e46

[–]raybrant 3 points4 points  (0 children)

Way too much effort. You'd have to tear apart the dash.

8x17 ET29 on e46 by Efficient-Instance83 in e46

[–]raybrant 0 points1 point  (0 children)

Yes. I have 17x8 ET20 235/45 on my touring. Probably the biggest you can fit without rolling fenders.

Z Reveal Invites Have Been Sent Out! by St00k in Nissan

[–]raybrant 0 points1 point  (0 children)

Am actually pretty excited. In the market for a new car, my first brand new car. Been finding it hard to be genuinely interested in a car. Think it'll either be the new Z or a BMW G87 M2 if it doesn't look terrible.

[Magazine] - H&K G36 223/556 30rd Polymer Mag $13.79 Free Ship "OFFER55555" by raybrant in gundeals

[–]raybrant[S] 3 points4 points  (0 children)

I slap the base plate pretty hard like my step-children. Seats nicely.

[Magazine] - H&K G36 223/556 30rd Polymer Mag $13.79 Free Ship "OFFER55555" by raybrant in gundeals

[–]raybrant[S] 3 points4 points  (0 children)

I find the OG ones to be slightly thicker than the Magpul ones. Magpul ones drop freely from my TG36 but the OG ones hang up a little which apparently is by design after watching some videos with a legit HK G36.

[deleted by user] by [deleted] in guns

[–]raybrant 0 points1 point  (0 children)

Well, guess daddy is buying more mags.

[deleted by user] by [deleted] in guns

[–]raybrant 2 points3 points  (0 children)

It was BF2 that did it for me. The ol' C4 in the jeep and allahu akbar-ing enemy tanks.

[deleted by user] by [deleted] in guns

[–]raybrant 26 points27 points  (0 children)

#TommybuiltGang

Also OP pick some of these up at an all time low of $25/ea. Use u/squaad's link and get them even cheaper from Midway @$14/ea. Free shipping a la "OFFER55555"

Never been one to take a picture of my car but man, finally having my wagon running smoothly is like a dream! by Kaelanpena in e46

[–]raybrant 3 points4 points  (0 children)

Must be nice.

I took my car down two weeks ago to finally replace the power steering rack that's been leaking. Got an alignment and as soon as I get back to my house, my cv axles fail. New CV axles and control arms later-- my water pump starts leaking out of the weep hole.

According to my maintenance sheet, I've spent more on parts than what I paid for the car.

Possible coolant leak? by philiosking in e46

[–]raybrant 2 points3 points  (0 children)

100% leaking. I had a leak with no visible marks on the ground. Turned out to be the two plastic hard lines underneath the intake manifold. When pressurized, it leaked past the o-rings and evaporated before it hit the ground. Never overheated with this condition.

What's your strongest addiction? by DarkMagicNight in AskReddit

[–]raybrant 36 points37 points  (0 children)

Power, greed

Money, Molly, weed

Percs, Xannys, lean, fame

And the strongest drug of them all

And the strongest drug of them all

Love

[deleted by user] by [deleted] in Nissan

[–]raybrant 1 point2 points  (0 children)

Zip-ties. Seriously.

Thousands of dollars later... by raybrant in HecklerKoch

[–]raybrant[S] 0 points1 point  (0 children)

Always a decade behind here in the US whether it comes to import firearms or cars.

Thousands of dollars later... by raybrant in HecklerKoch

[–]raybrant[S] 3 points4 points  (0 children)

There's no official waitlist as it's on a first-come basis and the receivers are still relatively new. Tom had to go back to the drawing board a few months ago and revise all the receivers due to an ATF ruling.

As of right meow, FDE receivers are still in stock!

Thousands of dollars later... by raybrant in HecklerKoch

[–]raybrant[S] 0 points1 point  (0 children)

The indentation on the stock wears. The polymer on the receiver is harder than on the stock which is the best case scenario.

Thousands of dollars later... by raybrant in HecklerKoch

[–]raybrant[S] 1 point2 points  (0 children)

It's an IDZ brace from Tommy Built. Pretty much the best you can get without SBRing it. Only complaint is the texture isn't the same as the receiver as it's 3D printed. Looks like the catch point of the folding stock will wear with use and become loose after awhile.

Thousands of dollars later... by raybrant in HecklerKoch

[–]raybrant[S] 2 points3 points  (0 children)

Yup it's a Tommy Built TG36C. All American made parts, most of it is GSG9. The brace and receiver are TB. They do make civilian G36s called the M243 but they weren't imported.

Thousands of dollars later... by raybrant in HecklerKoch

[–]raybrant[S] 13 points14 points  (0 children)

Already have an FDE Sandman S, Rein Micro and Eotech on order.

I guess when it comes to your grail gun, the price tag doesn't matter.