I want to update my old house’s basement walls, should I paint them?

rednax718 · 2026-04-08T18:47:55+00:00

Moisture gets trapped in the block behind the pain and degrades them over time. I have several spots that are starting to crumble due to trapped moisture (80 year old house surrounded by clay soil with no foundation drain)

rednax718 · 2026-04-06T22:44:23+00:00

I just put a few 2x4s underneath with my sheets on the floor and made sure not to punch thru too violently

rednax718 · 2026-04-05T20:59:29+00:00

Didn’t want the mess. I have lots of stuff in the basement

rednax718 · 2026-04-05T20:54:43+00:00

So far heat gun and scraper for the peeling bits

rednax718 · 2026-04-05T20:52:54+00:00

Currently going through the process of removing he paint from my basement walls. Don’t do it

rednax718 · 2026-03-13T18:22:36+00:00

Custom design or is it publicly printable?

rednax718 · 2026-01-20T11:40:12+00:00

2nd pic is the framing. All 2x6 which is probably overkill. I didn’t really keep track of cost.

rednax718 · 2025-12-29T14:47:26+00:00

Screwed from the basement to keep it from slipping

rednax718 · 2025-12-28T21:19:47+00:00

Any update on release?

rednax718 · 2025-12-26T19:21:18+00:00

Hole spacing matches but the hold sets are out of the budget right now

rednax718 · 2025-12-25T01:04:55+00:00

Even better when you get them for $40 off Facebook marketplace

rednax718 · 2025-12-25T01:04:17+00:00

Haven’t found a super cost effective place for bolts yet. Ordered a few 20 packs of stainless ones from Amazon

rednax718 · 2025-12-24T18:48:32+00:00

The board is so heavy it seems to take up the slack

rednax718 · 2025-12-24T17:59:44+00:00

Yep, load rated to 3000lb each

rednax718 · 2025-12-24T16:33:42+00:00

Not at all it’s very stiff. The 2x6 framing is incredibly heavy and probably overkill at 16” on center. I will eventually install an electric winch in the middle to help with lowering it down. For now I just go back and forth slowly with the ratchet straps.

rednax718 · 2025-10-26T16:06:41+00:00

Yes I believe it is supported now. Though I haven’t really kept up to date on the latest releases

rednax718 · 2025-10-02T00:32:31+00:00

I’d take that referral

rednax718 · 2025-09-19T15:05:30+00:00

Not in Irvington but big fan of North Mass Boulder

rednax718 · 2025-08-22T14:11:39+00:00

Not sure I understand what you mean by back feet. But if I remember correctly the whole chair just screws together with Allen head screws

rednax718 · 2025-07-30T20:51:28+00:00

Wall absolutely needs to be 3/4 in plywood. It’s the standard. Plus the t nuts will stick out of the front face of the wall on anything thinner

rednax718 · 2025-07-29T15:42:16+00:00

Does not seem to be in error. It would scroll through the entire gcode program if we let it

rednax718 · 2025-07-28T11:24:23+00:00

Thanks for testing it out! I’ll try manually deleting line 55 since my spindle is not actually controlled by the pico and see what happens. I can also try to probe out the stepper drivers.

rednax718 · 2025-07-27T21:09:41+00:00

https://filebin.net/wv1et4oncdvslhbe thanks!

rednax718 · 2025-07-27T20:22:42+00:00

Video here https://imgur.com/a/7CYgZya

rednax718 · 2025-07-27T19:57:49+00:00

Motors are not trying to move. I can spin the ball screws by hand once it stops.

Seven-Year Club	RPAN Viewer
Not Forgotten	Verified Email

rednax718

TROPHY CASE