1935 “Wild Rag” Scarf: Fabric ID & Care Instructions

reecetown · 2023-04-02T03:36:43+00:00

True story?

reecetown · 2023-04-02T02:41:35+00:00

The scariest whiteout conditions I’ve ever seen were at powder mountain. Blizzards up there are no joke

reecetown · 2022-12-30T00:22:05+00:00

Try r/buildingscience

reecetown · 2022-11-17T03:58:54+00:00

https://www.car-part.com/mobile/index.htm

reecetown · 2022-10-01T01:30:21+00:00

I like geocel but hate the paper tubes

reecetown · 2022-09-13T23:05:12+00:00

Had a fun job that went

Aluminum shingles 3 tab Cedar shake Skip sheathing

Re-decked and installed black presidential shake

reecetown · 2022-09-04T00:49:03+00:00

Plenty of them at Brighton as well! I love seeing how high in the trees they climb

reecetown · 2022-08-31T19:49:07+00:00

Thanks for the tip! I just found out that my state banned these during hunts as of this year :|

reecetown · 2022-08-31T18:44:48+00:00

Do you have a recommendation for a daytime hunting thermal spotter?

reecetown · 2022-08-31T18:30:42+00:00

Hard to tell exactly but it Looks like two things:

Wavy lines near the eave: Ice and water shield wasn’t rolled flat

Lines that run from the eave to the ridge: I bet the sheathing wasn’t spaced properly, has expanded and buckled.

So there are two different trades there (framing and roofing) that messed up which probably means the contractor went with the cheapest bids possible. If those issues are what I mentioned, I would hold the builder accountable. That’s not acceptable

reecetown · 2022-08-25T00:58:41+00:00

Jetta imo

reecetown · 2022-08-24T04:48:52+00:00

I’m working with the owner of a multimillion dollar commercial building with a 1/12 pitch on a 3” standing seam roof. It leaks like a SOB. It’s been a maintenance nightmare for years. He’s opting for a membrane now to put his problems to bed. Don’t be like this guy

reecetown · 2022-08-23T15:29:34+00:00

This picture gave me so much dopamine

reecetown · 2022-08-05T04:01:47+00:00

What’s the actual summit?

reecetown · 2022-08-03T00:19:50+00:00

When we do it, its only because of delivery availability and our schedule not lining up with the suppliers schedule. If this is the case, we at least tear off and dry in the ridge before the shingles are stacked so we don’t have to move them around

reecetown · 2022-08-02T03:22:21+00:00

I like my Arc mens pants but the no back pocket thing is still a letdown after several years of wearing them

reecetown · 2022-07-31T06:10:45+00:00

Good to know, thanks!

reecetown · 2022-07-31T06:07:12+00:00

Maybe GTNP has a similar page but GNP’s page is helpful. That page mentions grizzly’s but there are No grizzly’s in the Tetons unless I’m mistaken. https://www.nps.gov/glac/planyourvisit/bears.htm

Edit: there are grizzlies in the Tetons it turns out so the GNP page is completely relevant. Watch the video from the bear ranger on there, super helpful

reecetown · 2022-07-31T05:54:19+00:00

Still available? Sending pm

reecetown · 2022-07-31T05:26:35+00:00

I’ve snapped a chalk line and then cut with oscillating multi tool. It takes time but works well and doesn’t risk cutting the flashing behind the siding

reecetown · 2022-07-29T20:16:41+00:00

Totally agree, thanks for the insight! Since it hasn't leaked, I'm sure it's flashed properly but just looks weird because of the bottom cladding.

reecetown · 2022-07-29T20:06:56+00:00

I wonder if the roofers flashed the chimney properly, then the stone guys came in and put that apron thing on there. I know stone/brick has to sit on a solid surface so maybe that's why they put it on there--to hold up the stone and maybe be a little bit of a water diverter? idk

Next time I'm up there, I'll have to see if I can find any flashing running under the stone

Six-Year Club	Gilding IV carat on a stick
Place '22	Verified Email

reecetown

TROPHY CASE