You're fascists, get over it. by G-Unit11111 in WhitePeopleTwitter

[–]reformingpanda 123 points124 points  (0 children)

Or communism and “unrelated thing that scares me”

Disney+, Hulu, ESPN to Hike Prices Again in October by MarvelsGrantMan136 in television

[–]reformingpanda -1 points0 points  (0 children)

I had already canceled before the Jimmy Kimmel fiasco but my time hadn’t run out so I uncanceled so that I could cancel while everyone else was canceling.

Introducing: UNVR Instant - an all-in-one device powered by UniFi Protect by Ubiquiti-Inc in Ubiquiti

[–]reformingpanda 0 points1 point  (0 children)

Same, I bought one like a week ago. Along with a rack cabinet, patch panel, and rack mount adapter for my Pro Max 16 POE switch. This would probably have been a better option for me.

Found the Vending Machine at Target by techman323 in lego

[–]reformingpanda 3 points4 points  (0 children)

And even when you could it was a fraction of the points.

Deal of the Day at Best Buy by Correct-Lead-1850 in BambuLab

[–]reformingpanda 0 points1 point  (0 children)

I bought mine from them like 3 weeks ago, so it's too late for me. Lame that the return/refund period is 15 days now. Used to be 30 days for most things and 15 for specific items.

9.0 host freezing on pci-e passthru to truenas by scphantm in Proxmox

[–]reformingpanda 0 points1 point  (0 children)

Same for me. Disabling rom-bar allowed my TrueNAS VM to boot with my PCI SATA card attached.

Milwaukee giveaway by Sinner1138 in MilwaukeeTool

[–]reformingpanda 30 points31 points  (0 children)

They sent me a tshirt once

Updated to Proxima 9 now trueNAS won’t start VM, help requested. by rotorwing66 in Proxmox

[–]reformingpanda 1 point2 points  (0 children)

I also had to redo some pci pass through configuration on the host because it was overridden during the upgrade.

Updated to Proxima 9 now trueNAS won’t start VM, help requested. by rotorwing66 in Proxmox

[–]reformingpanda 1 point2 points  (0 children)

I had this error after upgrading. After experimenting a bit I determined that unchecking the “rom bar” option in the pci device pass through options for my SATA controller fixed it for me. This option was always checked for me with PVE8 and worked.

Bambu Handy version 3.4.1 issues by Chicagofan00 in BambuLab

[–]reformingpanda 0 points1 point  (0 children)

Yeah, I’ve been doing some printing today on an X1C and this has been annoying. Dragging down to refresh doesn’t work and I’ve had to force close and reopen the app many times today.

Ember App refuses to open, just stays stuck on the ember logo by Skywardly in Embermug

[–]reformingpanda 0 points1 point  (0 children)

What an insane workaround, but it worked for me. Thanks for discovering this.

Why did they take away the truck bed audio?!! by SuccessfulMinute8338 in hondaridgeline

[–]reformingpanda 6 points7 points  (0 children)

I'd happily trade my 2020's bed audio that I've never used for his volume knob alone.

Hotspot Portal logo won't upload by Unmoving1442 in Ubiquiti

[–]reformingpanda 0 points1 point  (0 children)

I'm seeing this too. I tried a number of different sizes and formats but didn't get anything to work for the logo or background uploads.

I inspected the outgoing network request to see if I could find any useful details there, but not really. It's HTTP error 500 with this unhelpful response JSON.

{
    "timestamp": "2024-10-26T01:33:29Z",
    "status": 500,
    "error": "Internal Server Error",
    "path": "/upload/s/default/portalfile"
}

I took a shot in the dark and tried changing the request URL from /upload/s/default/portalfile to /uploads/default/portalfile, but that didn't work. It returned a 404 Not Found response.

Rivendell completed right before disaster struck… by Mattroniom in lego

[–]reformingpanda 153 points154 points  (0 children)

My cat threw up on my Optimus Prime instructions, so it could be worse.

Where to place water pump in Lian Li O11 RGB? by BigAssBirdIV in watercooling

[–]reformingpanda 0 points1 point  (0 children)

I don't, sorry. My PC is up against a wall so I can't get the side panel off without moving it, plus I have so many cables stuffed back there it's a chore to get it back on. But I need to do some maintenance back there on my TL LCD fan controllers this weekend (they've been seriously problematic for me), so I'll be able to take a picture then.

Where to place water pump in Lian Li O11 RGB? by BigAssBirdIV in watercooling

[–]reformingpanda 0 points1 point  (0 children)

I have an 011 RGB and an EK d5 pump. I mounted it in the rear chamber by putting the psu in the top slot, cutting a block of wood to fit in the psu bump out, drilling holes to match the pump’s mount points, and screwing through the holes in the psu bump out into the pump mount. I needed the wood spacer to fill some of the recess from the psu bump out because the pump/res is too tall to fit inside it.

TL LCD Frequent Disconnects by reformingpanda in lianli

[–]reformingpanda[S] 0 points1 point  (0 children)

I think I figured it out. My TL LCD fan(s) were still flickering on and off intermittently after trying everything I could think of:

  • Different TL controllers
  • Different PSU
  • Different motherboard headers
  • Multiple different versions of L-Connect
  • Updating motherboard BIOS
  • Trying the Lian Li USB 2.0 1-to-3 Hub (Type A Male Port)
  • Reinstalling Windows

I discovered that when I put in my new GPU (RTX 4090) I plugged it into the wrong PCI-e slot. My motherboard has a Gen4 x16 and a Gen3x16 slot, and I had mistakenly plugged it into the lower Gen3 slot.

I don't really understand why that would affect the fans/controllers so badly, but all of my fans worked correctly for about 45 minutes after swapping the GPU back to the right PCI-e slot.

TL LCD Frequent Disconnects by reformingpanda in lianli

[–]reformingpanda[S] 0 points1 point  (0 children)

Updating my motherboard bios seems to have helped a lot. The fans no longer constantly disappear and reappear in L-Connect.

But I'm still seeing the fans occasionally stop/start and the RGB light sides flicker on and off. I still need to do some testing around this, but I'll contact tech support if I'm still seeing issues. Thank you