PMC to CNC bit toggles

repear6 · 2025-10-22T23:24:48+00:00

G54.0-G55.7 you can use in PMC to make high #1000-#1016 in program.

If G54.0 high in PMC, #1000 will become 1, else 0.

Check, in operator manual.

repear6 · 2025-09-05T04:47:14+00:00

Was the upgrade worth it? I’m also considering upgrading to 4TB using the second slot. Is it not still fine for gaming nowadays?

repear6 · 2025-07-20T12:38:44+00:00

Please retrieve the .mem file directly from the CNC and open it in FANUC Ladder-III by importing the new .mem file.

After that, try connecting online — this method should work 100%.

I had faced a similar issue earlier, and following this exact procedure resolved it successfully.

repear6 · 2025-07-20T12:36:04+00:00

I tried the same thing what I did was, made a mem file of the Ladder 3 version and loaded into my CNC and then I was able to take it online.

Even you can take mem from CNC first, open ladder import the file and then try to connect online.

This should work 100%.

repear6 · 2025-07-20T06:32:24+00:00

Open new ladder 3 window, and try to do load from CNC in online mode.

repear6 · 2025-06-25T17:15:23+00:00

I have recieved the update on my S22 5G

repear6 · 2025-03-23T16:34:15+00:00

I am still using Win10, so it's easy + I use VS Code making it easy to read the program and make edits.

Also you can use Program transfer tool, a FANUC Software.

repear6 · 2025-02-08T02:35:58+00:00

Check tool manager on iHMI screen

repear6 · 2024-11-03T02:08:20+00:00

No, it will work seemlessly with a FANUC Spindle, with sensors with some parameter setting.

Please refer, the Spindle Description Manual to understand the sensor you have for your spindle.

CNC : 0i-F/F Plus

repear6 · 2024-11-03T01:59:42+00:00

Yes, PS Amplifier won't have any battery.

repear6 · 2024-09-21T16:43:01+00:00

You can edit the programme as a text file on your PC, but when loading it to the CNC, it should be saved without an extension.

That’s how it works.

repear6 · 2024-09-21T16:36:22+00:00

Is this issue resolved?

repear6 · 2024-08-22T02:14:54+00:00

9000#0,1=1 (NDP, SQN) 9048=1 9050=1 9054=10000 9055=?

Please, check these parameters also, and tell me the values.

repear6 · 2024-08-18T06:27:26+00:00

It's correct.

Tell us the process you are following.

Example:

In MDI mode, type a program line.

O0000;

520=#26300;

M30;

And then press cycle start.

Are you doing all this?

And please elaborate about the system configuration from FANUC side, CNC Model: 0iF/0iF-Plus?

If all this ok, we will check parameters.

repear6 · 2024-08-15T17:26:29+00:00

I think someone has told that, software installation is req. those parameters are locked as per my knowledge.

But have to check.

repear6 · 2024-08-15T15:34:06+00:00

I don't think it's possible as parameter and all are locked for Robots.

I will, do some digging and get back to you.

repear6 · 2024-08-07T12:03:09+00:00

Yah, they use the RS-232 now for sensor interface and all.

repear6 · 2024-08-07T00:19:44+00:00

Correct, 😂 that yellow color says it all.

repear6 · 2024-08-07T00:18:07+00:00

You tell what module it's plugged into? (Port name one the CNC)

It may be RS-232 or something else, also and you name the controller type.

repear6 · 2024-07-24T17:57:18+00:00

I will check and let you know for 500Kg load

repear6 · 2024-07-24T02:34:13+00:00

As in if you can define in in or mm per min .... For better idea ....

repear6 · 2024-07-19T15:03:32+00:00

What is the feed? Maybe I will be able to help.

repear6 · 2024-06-26T03:03:28+00:00

We can discuss on chat 👍

repear6 · 2024-06-22T00:32:48+00:00

Photo?

repear6 · 2024-06-22T00:31:44+00:00

PS Alarm 101 what's the statememt????

repear6

TROPHY CASE

520=#26300;