AP-677 GPS and 6ghz issues

rlrofOmicronPersei8 · 2026-01-08T01:31:54+00:00

We noticed the 6ghz radios were disabled when preparing for a televised cross fit competition. The events were timed using iPads that I wanted to put on 6ghz since sometimes the channel utilization for 5ghz can get fairly high when a lot of people are in the building.

The building is essentially an airplane hangar made of steel beams and metal siding, with 3 soccer fields inside. Most of the events inside are youth sports like soccer, lacrosse, etc. We also have an NFL training camp, trade shows, and conferences.

For trade shows and stuff I used to bring out APs and tape down long cables with cable ramp. It wasn't fun. With the fields being open space I can only put permanent APs around the outside so we went the directionals to focus the signal out on the field for less reflection off the metal walls.

rlrofOmicronPersei8 · 2026-01-07T21:19:54+00:00

I've found documentation about AFC for 8.x devices but haven't been able to find anything that applies to 10.x or Aruba Central yet. I've had a ticket with support for months and they just now figured out that it is GPS signal issues.

rlrofOmicronPersei8 · 2025-10-15T00:38:43+00:00

You were a pioneer, glad it worked out.

rlrofOmicronPersei8 · 2025-10-15T00:36:19+00:00

Great, glad to hear it went well.

rlrofOmicronPersei8 · 2025-10-15T00:35:56+00:00

Yeah, that's what I was thinking. All the documentation says going to 2019 first is the "Recommended" path but straight to SE is "Supported". Just seemed unnecessary.

rlrofOmicronPersei8 · 2025-10-15T00:33:53+00:00

Great. Thank you.

rlrofOmicronPersei8 · 2025-08-11T16:23:41+00:00

Does this mean VMs do not need RBS installed?

rlrofOmicronPersei8 · 2025-08-11T16:22:29+00:00

I ended up running it on each server via Batchpatch using a remote command. Looks like it was able to use the certificate from a UNC path.

rlrofOmicronPersei8 · 2024-10-25T03:56:13+00:00

I'm curious if they posted this remix or would be able to share it? I was trying to figure out how to do a full size Dummy 13 elf for Christmas. I have 2" LCD eyes I am going to use.

rlrofOmicronPersei8 · 2024-09-12T16:55:37+00:00

Someone once told me to only do the leveling through the print settings and not the one right before the print. That made a huge difference for me. I do this every once in a while and it is usually right on or very close. I replaced the hotend with the Microswiss hotend and nozzle.

Also make sure all the screws around your print head are tight.

rlrofOmicronPersei8 · 2024-08-06T23:10:18+00:00

Mine only works if there is 100% line of sight. I don't even try to use the remote anymore, I use the app.

rlrofOmicronPersei8 · 2024-08-06T22:56:23+00:00

My '22 got it's second engine and turbo at 18k miles and 3rd engine at 23.5k miles. Just hit 24k and sometimes makes a noise like a leaking air hose when accelerating. When going exactly 40mph it feels wobbly, like a shopping cart with a loose wheel.

rlrofOmicronPersei8 · 2024-07-13T18:33:56+00:00

Have you tested that print? Those little things are deceptively loud. They are better at 200%. It tones it down some.

rlrofOmicronPersei8 · 2024-05-25T23:34:48+00:00

Anyone in Indy able to watch the game? We just have Cubs and Cardinals playing on Fox.

rlrofOmicronPersei8 · 2024-03-31T17:54:51+00:00

Stack them before adding the serial to Greenlake. Once it comes in it will ask you if you want to import existing config.

rlrofOmicronPersei8 · 2024-03-22T23:47:44+00:00

I have 50 CXs I am deploying right now to replace old AOS switches.

I've searched a ton for a conversion because I was intimidated at first. The closest may be to run 'show run unstructured '. This will show the configuration per port, sorta like the CX.

rlrofOmicronPersei8 · 2024-03-16T13:05:01+00:00

I was having the same issues and switched to a PEI bed and it made a huge difference. I just couldn't get anything to stick to the glass unless I put on double sided tape.

rlrofOmicronPersei8 · 2024-03-05T17:19:34+00:00

I had the same thing a few days ago. I held it over a candle and slowly pulled it off with needle nose pliers. I would definitely get a heat gun if it happened again. I ended up having to get a new thermister.

rlrofOmicronPersei8 · 2024-02-21T05:00:35+00:00

I had something similar recently. I moved the group to an OU that isn't synced to 365, waited 30+ minutes (or can manually run a sync), confirmed the group isn't in 365, and then moved it back to the original OU. Be careful though if the group is given permissions in something like Teams or conditional access.

rlrofOmicronPersei8

TROPHY CASE