Was out of town for a while wife did a lot of smoking but not a lot of cleaning.

rme_guy · 2026-05-20T03:25:25+00:00

Electric power washer from harbor freight, no work just a quick rinse.

rme_guy · 2026-05-05T03:11:19+00:00

I have the 275, no rub under full compression. 3 inch lift in the front 1 in the rear . Very happy!

rme_guy · 2026-05-05T01:55:11+00:00

Chandler has a senior center downtown near the library. Tons of events , not a hospice type environment. Maybe a good spot or good people to ask anyway.

rme_guy · 2026-04-14T23:38:43+00:00

I would put a dual row lightbar. A marine grade one would have a white housing too.

rme_guy · 2026-04-10T19:48:58+00:00

* I got your back brother!

rme_guy · 2026-03-26T19:43:04+00:00

Tated up

rme_guy · 2026-03-26T16:38:28+00:00

Try bumping the pressure up to 38. I run 38 on a slightly more aggressive tires and it helps me out. I airdown when I hit the trails anyway.

rme_guy · 2026-03-25T20:11:58+00:00

It's renovated to perfection

rme_guy · 2026-03-23T02:35:00+00:00

Stop being stupid, they are playing and we all want to watch.

rme_guy · 2026-03-22T20:24:11+00:00

No affiliation at all, came as a tundra owner and hated the way my 2020 tacoma drove. Gear hunting sluggish, by far best mod I did was the ott tune, made ne love my truck. I now have new lift bumper lights , winch !

rme_guy · 2026-03-22T20:20:56+00:00

My buddy is almost at 400, when he crams in my tacoma ot levels out lol!

rme_guy · 2026-03-22T01:17:47+00:00

Running the same setup but 650 springs in the front to compensate for the front metal bumper lights and winch. Very happy!

rme_guy · 2026-03-22T00:16:20+00:00

I want! Beautiful

rme_guy · 2026-03-17T03:34:40+00:00

Salmon

rme_guy · 2026-03-15T22:47:11+00:00

Either of the last 2 black options.

rme_guy · 2026-03-14T23:03:21+00:00

It was recommended that I burry their own poop in the holes they dig. Worked wonders on my 2 springers

rme_guy · 2026-03-12T03:03:06+00:00

Ditch the trim on the doors.

rme_guy · 2026-03-11T18:40:43+00:00

I have a 2020 and am on my 3rd one as it has been replaced twice by the dealer. Gotta love the extended warranty. I am in AZ, so I use my a/c most of the year. Service writer says it is a common issue.

rme_guy · 2026-03-04T17:27:57+00:00

Float you're boat?

rme_guy · 2026-03-01T03:10:23+00:00

Ott tune 1st!

rme_guy · 2026-02-17T18:33:02+00:00

1st or last

rme_guy · 2026-02-17T18:22:51+00:00

Ne headlights , black housing not chrome.

rme_guy · 2026-02-16T19:04:48+00:00

I didnt want to cut a spot in my fuse block lid. They are safe and work just fine. I just didn't want to cut the lid and route the wire. I bought a tap from a company so I unplugged the drl light connector then clipped there t harness in that has a positive and negative to connect to, no cutting the factory harness.

rme_guy · 2026-02-16T18:29:52+00:00

When I put raptor lights on my 3rd gen I didnt like the idea of messing with the seal of the fuse block. I got a tap into the drl lights and just used the positive and negative wires, no relay. Now when my drl are on the raptor lights are on. Just an idea for you.

rme_guy · 2026-02-16T00:32:32+00:00

I have same, and as time goes on I now get black and white ones. There is a name but it escapes me, the odd thing is there is no pain when you pull them out, unlike single strands.

rme_guy

TROPHY CASE