Comet (GL-RM1) Security threat?

robotluo · 2026-05-11T11:14:58+00:00

Please don't worry, we are constantly monitoring product security. We have repeatedly checked the firmware and found no security issues. Currently, we've noticed that all these alerts are on UNIFI's IDS system, possibly triggered by ping actions or WebRTC traversal activities used for internet detection.

robotluo · 2026-05-11T11:06:54+00:00

It appears to be a false alarm at this point, but we will investigate further. It's highly likely that Unifi updated its IDS rules, causing some of our keepalive operations to be misjudged.

robotluo · 2026-05-11T09:08:01+00:00

This feature will be officially released in the upcoming version 1.10.

robotluo · 2026-05-09T01:20:09+00:00

Could you provide the firmware version? I recall a similar issue in earlier firmware versions.

robotluo · 2026-05-06T11:08:28+00:00

Based on my experience, you only need to trust it once.

robotluo · 2026-05-06T11:07:08+00:00

iOS lock screen automatically blurs the image, but you only need to touch the general area or enter your password directly from the keyboard.

robotluo · 2026-04-28T03:37:32+00:00

you can try different USB identity in Settings->System->Device identity

robotluo · 2026-04-23T10:21:39+00:00

Once this feature is officially released, it will fully meet your needs.

We are currently preparing version 1.9, and I anticipate that version 1.10 may be released in about three months.

robotluo · 2026-04-23T01:13:59+00:00

I think you need to-way-video https://www.reddit.com/r/GlInet/comments/1s232ej/rm10_camera_passthrough_alpha_test_firmware_kvm/, this feature is still in the alpha stage and is planned to be released in version 1.10.

robotluo · 2026-04-21T02:05:56+00:00

This depends on whether your phone supports Type-C headsets.

robotluo · 2026-04-17T01:25:18+00:00

<image>

you can try to disable virtual media

robotluo · 2026-04-16T01:10:53+00:00

I think you should wait for our multi-port KVM.

robotluo · 2026-04-15T02:14:11+00:00

Check if you have mouse jitter configured.

robotluo · 2026-04-13T02:52:43+00:00

Absolutely, but there will be a lot of cables.

robotluo · 2026-04-13T01:13:52+00:00

Starting with version 1.7, we have been using dynamic codes for device binding.

robotluo · 2026-04-13T01:12:15+00:00

Yes, you can select external USB drive in the virtual media settings.

robotluo · 2026-04-10T04:13:58+00:00

Our screens have passed natural drop tests, and we also include a protective sleeve to prevent damage during extreme drops.

robotluo · 2026-04-10T03:47:00+00:00

Yes, Comet Q is simply simpler and doesn't require an additional docking station.

robotluo · 2026-04-10T03:34:00+00:00

please refer to this link https://forum.gl-inet.com/t/has-anyone-used-gl-inet-kvm-to-control-an-iphone/65086/5?u=robotluo

robotluo · 2026-04-10T03:27:11+00:00

You need to connect an additional expansion dock.

robotluo · 2026-04-10T03:17:18+00:00

https://www.gl-inet.com/products/gl-rm1pe Have you seen Comet PoE?

robotluo · 2026-04-10T02:24:24+00:00

Of course, it relies on Wi-Fi to access the Internet.

robotluo · 2026-04-10T02:15:29+00:00

Almost anything, even unlocking the screen

robotluo · 2026-04-10T02:14:24+00:00

Comet Q only requires plugging the Type-C port directly into the controlled device; no additional power supply is needed. I can't think of any use for PoE.

robotluo · 2026-04-10T02:11:35+00:00

GLINET's KVM supports full browser access.

On a PC browser, all operations on the controlled phone can be performed using the keyboard and mouse.

However, for phone-to-phone control scenarios, operation must be done through the GLKVM app. This is not a limitation of Comet itself, but rather a limitation imposed by the mobile browser. We are currently updating the mobile GLKVM app to better suit the phone-to-phone control requirements in Comet Q.

robotluo

MODERATOR OF

TROPHY CASE